Lg Range LRE30757SW/00 Doesn't shut off

This radiant surface element mounts beneath the glass cooktop to heat a burner zone on your range. Replacing a failed element restores consistent, responsive heating and reliable temperature control for everyday cooking.

• Provides controlled electric heat under the glass for the selected cooking zone
• Works with the range controls to cycle on/off and maintain the set temperature
• Common symptoms: burner won't heat, heats intermittently or only in spots, or the indicator comes on but the surface stays cold
• Visual clues can include a broken or blistered heating coil visible beneath the glass

• Disconnect power at the breaker and allow the cooktop to cool completely
• Lift/prop the glass top per service procedure; note wiring and bracket locations before removal
• Transfer any brackets/insulators from the old element and make secure, like-for-like connections
• Handle the glass and element carefully; test operation before final reassembly

This radiant surface element mounts beneath the glass cooktop to heat a surface burner. Replace it when a burner won't heat or heats intermittently to restore normal, consistent cooking performance.

• Generates radiant heat under the glass-ceramic top for a surface burner
• Cycles on and off to help maintain the set temperature
• Typical failure signs: no heat, intermittent heat, or visible damage to the element/terminals
• Used on electric ranges and glass cooktops

• Disconnect power at the breaker and allow the cooktop to cool fully before service
• Lift/hinge the glass top and support it to avoid stress or cracks
• Note wire positions; transfer any mounting clips/brackets from the old element to the new
• Ensure the element sits level under the glass and all connections are secure before reassembly

Restore consistent heat to your smooth-top range. This radiant surface element sits beneath the glass-ceramic cooktop and provides the controlled heat needed for boiling, simmering, and sautéing when the surface control sends power. What it does:

• Generates radiant heat beneath the glass cooking surface when energized
• Works with the surface control to reach and maintain the set temperature
• Helps address a burner that won't heat or only heats intermittently
• Replaces a failed or visibly damaged element to restore proper cooking performance

• One radiant surface heating element

• Disconnect power by unplugging the appliance or switching off the circuit breaker before servicing
• Lift and support the glass cooktop per your model's service procedure to access the elements
• Note wire locations; transfer any brackets or clips from the old element to the new one
• Handle carefully and avoid flexing the heating coil; ensure the element sits level before reassembly