Need Help?
Call or text
Too hot is the 6th most common symptom for Maytag MEDB800VB0. It takes 30-60 minutes to fix on average. The instructions below from DIYers like you make the repair simple and easy. Many parts also have a video showing step-by-step how to fix the "Too hot" problem for Maytag MEDB800VB0. So, if your MEDB800VB0 dryer gets the clothes extremely hot, hot to the touch or overheating, the following info will help you identify the problem.
Parts for Maytag MEDB800VB0
The Thermistor is an OEM part for Whirlpool brand dryers. It is a temperature-sensing resistor that monitors air temperature changes during the drying cycle. The thermistor provides feedback to the control board on heating element performance and internal air condition.
Symptoms of a failed thermistor include:
Causes can be related to normal wear and environmental exposure over time. Failure prevents the dryer from achieving optimal drying conditions.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Order now and we'll ship it out Today
Over 94% of our orders are delivered in 2 days or less
The Thermal Cut-Off Kit is an OEM replacement part for Whirlpool dryers, responsible for protecting the dryer from overheating by interrupting the power flow to the heating element if the dryer air temperature reaches a dangerously high level.
Symptoms of a bad Thermal Cut-Off Kit include:
Causes of failure can include restricted airflow from a clogged lint filter or venting system or a malfunctioning heating element causing excessive temperatures. These issues can lead to the thermal cut-off being triggered to prevent overheating, necessitating the replacement of the kit.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances. Note: It's possible some models may use part number 280148 in place of this. Look at photo's for verification.
The Dryer Heating Element is an OEM part for Whirlpool electric dryers. This element provides critical heat to properly dry wet laundry loads. Consistent warmth throughout cycles is key to leaving clothes completely dry. This 5400-watt, 240-volt heating element heats the air circulating around the drum.
Causes of a bad heating element can include failure due to extended usage cycles over time, or mineral buildup inhibiting heat transfer.
Symptoms of a faulty element include:
This OEM Whirlpool replacement element is also compatible with Kenmore, Maytag, Amana and Whirlpool brands.
The Moisture Sensor Bar is an OEM replacement part for Whirlpool dryers. It is a component located inside the dryer drum that senses the moisture level of clothes during tumble drying cycles. The moisture sensor bar utilizes sensors or probes to gauge how dry clothes are getting and signals the dryer to shut off once clothes reach the desired dryness level selected by the user.
Symptoms of a bad moisture sensor bar include:
Causes of a faulty moisture sensor bar are usually due to normal wear and tear over time. Dust or lint buildup can also affect its ability to provide accurate readings.
This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
The Thermal Fuse is an OEM part for Whirlpool dryers. It is a critical safety component designed to protect the dryer from overheating by blowing and cutting off power if the temperature exceeds safe limits. This disposable, one-time fuse is essential for preventing potential fire hazards and ensuring the appliance operates within safe temperatures.
Symptoms of a bad Thermal Fuse include:
Causes of a bad thermal fuse can stem from restricted airflow due to lint buildup, a malfunctioning heating element that causes excessive temperatures, or other electrical issues within the dryer.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.