Maytag Dryer MLG19PRDWW Will not drain or doesn't drain

The Drain Pump Assembly is an OEM part for Whirlpool front-loading washing machines. Located within the bottom of the tub housing, this assembly pumps water out through the drain hose during drain cycles. Efficient water removal relies on a functioning drain pump.

Causes of a drain pump failing can include clogs or mineral deposits obstructing the impeller over numerous washes. The electric motor inside may also degrade from extensive usage cycles.

Symptoms of a bad drain pump assembly include:

• Retained water remaining in the bottom of the washer tub
• Slow or incomplete draining at the end of cycles
• Gurgling or grinding noises from underneath the tub area
• Error codes related to overflow or drainage issues

This OEM Whirlpool part is compatible with KitchenAid, Jenn-Air, and some Kenmore front-loading washer models.

The Wax Motor is an OEM part for Whirlpool washing machines. It is a crucial component responsible for driving the agitator or impeller that circulates and agitates the water and clothing during the wash cycle.

Symptoms of a faulty Wax Motor include:

• Washing machine not agitating or spinning during cycles
• Loud grinding or screeching noises from the motor area
• Burning smell or smoke from the motor overheating
• Error codes related to the motor or drive system

Causes of a bad Wax Motor can include mechanical failure due to wear and tear over time, electrical issues, or problems with the motor bearings or windings. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Belt and Isolator Kit is an OEM part for Whirlpool washing machines. This kit includes a drive belt and isolators that work together to transfer motion from the motor to the washer drum while dampening vibrations. 

Over time, the belt can wear out, stretch, or break due to regular use, heavy loads, or friction. The isolators may also deteriorate, losing their ability to absorb shocks effectively.

Symptoms of a bad Belt and Isolator Kit include:

• The drum not spinning or agitating
• Excessive vibration or noise during operation
• The washer failing to start or complete cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.