Whirlpool Washer GHW9100LW2 Will not stop filling with water or doesn't stop filling with water

The Inlet Valve is an OEM part for Whirlpool washing machines. This valve is critical for controlling the flow of water into the washing machine, ensuring that the right amount of water is supplied for various washing cycles. It consists of solenoids that open and close to allow hot and cold water to enter the wash tub at the appropriate times, according to the selected wash settings.

Symptoms of a failing Inlet Valve include:

• The washing machine not filling with water at the start of a cycle
• Water entering the machine slowly or intermittently
• The machine overfilling or underfilling
• Unusual noises coming from the valve area during the filling stage
• Leakage around the valve

Causes of a bad inlet valve can include mineral deposits from hard water which can clog or block the valve, wear and tear on the solenoids over time leading to failure to open or close properly, and electrical failures that affect the operation of the solenoids.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Flow Meter is an OEM part for Whirlpool washing machines. It is responsible for monitoring and regulating the flow of water entering the washing machine during the fill cycle, ensuring the correct amount of water is added for efficient and effective cleaning.

Causes of a faulty Water Inlet Flow Meter include sediment buildup, physical damage, or electrical issues with the meter's sensors or connections.  

Symptoms of a bad Water Inlet Flow Meter include:

• Incorrect water levels in the wash tub
• Washing machine not filling properly with water
• Error codes related to water inlet flow or water level issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pressure Switch is an OEM part for Whirlpool washing machines. This component is crucial for monitoring and controlling the water level within the washer, ensuring it fills to the appropriate level for each cycle.

Common causes of a bad pressure switch include electrical faults, wear and tear from regular use, or damage due to exposure to water and detergent. These issues can prevent the switch from accurately detecting and regulating water levels.

Symptoms of a bad pressure switch include:

• Washer overfilling or underfilling
• Inconsistent water levels during cycles
• Error codes related to water level issues
• The washer not progressing through cycles properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.