Microwave Hardware Hand Line Mover Start Switch Parts

This truss head tapping screw secures panels, brackets, and covers in your appliance. Replacing a missing or damaged fastener restores a snug fit, reduces vibration, and helps keep components properly aligned for reliable performance.

• Provides low-profile holding power; wide truss head helps secure thin panels and trim
• Replaces lost, stripped, or corroded screws at the original mounting points
• Helps eliminate rattling, vibration, or loose handles/covers
• Addresses situations where a screw will not tighten or backs out during use

• Disconnect power; shut off water/gas if applicable before servicing
• Align parts and hand-start threads to avoid cross-threading
• Tighten until snug; do not overtighten to prevent stripping
• If the receiving hole is damaged, for repair before installing the new screw

This Nut Assembly is a threaded fastener used to securely hold an associated component inside the microwave. Replacing a worn, stripped, or missing nut helps reduce vibration, eliminates rattling, and keeps parts properly aligned during operation.

• Provides a secure threaded anchor point for the matching screw/bolt
• Helps maintain alignment and prevent vibration or rattling
• Replaces stripped, cracked, or missing hardware
• Addresses symptoms like loose or shifting components and recurring rattling noises

• Disconnect power; if built-in, switch off the circuit breaker
• Access the mounting location, remove damaged hardware, and install the new nut assembly
• Avoid overtightening to prevent damage to threads or surrounding material

This switch/fuse kit replaces a worn or failed control switch and associated fuse to restore reliable power control. It provides the exact components needed to address common start and power interruptions. What it does:

• Replaces a faulty control switch to restore on/off or cycle control
• Replaces the protective fuse to stop power loss from a blown fuse
• Helps resolve no-start, intermittent power, or control failures
• Restores proper electrical continuity for safe operation

• Disconnect power to the appliance before starting any work
• Handle electrical components carefully and avoid metal contact with terminals
• Verify correct part orientation and secure all connections per OEM guidance

This micro switch is a small electromechanical door/control switch that restores reliable on/off signaling for your appliance. Replacing a failed switch helps restore normal operation and safety interlocks. What it does:

• Opens or closes an electrical circuit when actuated, enabling controls or motors to run
• Commonly used in door and safety interlock applications to prevent operation when open
• Can stop intermittent power or control-response problems caused by a worn switch
• Helps resolve symptoms like appliance not starting, controls not responding, or cycling unexpectedly

• One micro switch

• Disconnect power (unplug appliance or flip the breaker) before servicing
• Observe sharp edges and wear protective gloves; remove access panels as needed
• Verify correct switch orientation and actuator engagement before reassembly
• Test continuity with a multimeter after installation to ensure proper operation

Package of 12

Replacement screw used to secure panels, trim, and internal components in Frigidaire appliances. Restores proper fit after repairs and helps eliminate rattling or loose parts for safer, quieter operation. What it does:

• Secures panels, brackets, and trim to maintain correct alignment and fit
• Prevents vibration and rattling caused by loose or missing fasteners
• Use when original screw is missing, stripped, or damaged
• Matches common fastener locations on affected Frigidaire appliances

• Disconnect power and water before starting any repair
• Use the correct driver to avoid stripping the screw head; hand-start to ensure alignment
• Do not overtighten; tighten until snug to avoid damaging threads or plastic parts

The Microwave Bolt-Toggle is an essential component for maintaining your Samsung microwave's performance. This genuine OEM part ensures a secure and reliable connection within your appliance, supporting the door mechanism for smooth operation. Designed specifically for Samsung microwave models, the Microwave Bolt-Toggle guarantees precise compatibility, making installation straightforward and hassle-free. Its robust construction provides long-lasting durability, reducing the need for frequent replacements and ensuring your microwave functions optimally. By choosing this genuine OEM part, you can trust in the quality and reliability that Samsung is known for, avoiding the potential issues that come with inferior components. Whether you're addressing a loose door or enhancing the overall stability of your microwave, the Microwave Bolt-Toggle offers dependable performance and peace of mind. Restore your microwaveGÇÖs functionality with this high-quality part and enjoy a seamless cooking experience every time.

The Microwave Mounting Hardware Assembly is essential for securely installing your Samsung microwave. This genuine OEM part ensures a stable and safe setup, keeping your appliance firmly in place. Designed specifically for Samsung microwave models, it guarantees a perfect fit and seamless integration with your kitchen setup. The durable materials used in this assembly provide long-lasting support, reducing the risk of wobbling or movement during use. Installing this mounting hardware is straightforward, allowing you to quickly restore your microwave's functionality without the need for professional help. By choosing the Microwave Mounting Hardware Assembly , you benefit from reliable performance and enhanced safety for your household. Whether youGÇÖre replacing worn-out parts or setting up a new installation, this genuine OEM part offers the quality and compatibility you need to maintain the efficiency of your Samsung microwave.

A replacement unified-thread screw used to secure appliance panels and internal components. Provides a direct fastener to restore secure attachment when original screws are missing, damaged, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and other appliance components that use a unified-thread screw.
• Restores secure mounting to reduce rattling, movement, or misalignment of parts.
• Replaces stripped, rusted, or missing screws to help maintain safe operation.
• Works where the appliance's service manual or parts diagram specifies a unified-thread fastening point.

• Disconnect power and water before servicing for safety.
• Use the correct screwdriver or bit to avoid stripping the head; install by hand until started, then snug—do not overtighten.
• Replace like-for-like: match thread type and length to the removed screw to ensure proper fit and function.
• If other fasteners show corrosion or damage, inspect nearby hardware and replace as needed.

This installation hardware kit provides the mounting fasteners and brackets needed to secure your appliance during installation, helping restore proper fit and stable operation. It's a small parts kit designed for use where OEM mounting components are required. What it does:

• Supplies the mounting screws, brackets and small hardware used to attach and level the appliance
• Replaces missing or damaged fasteners that can cause loose panels, gaps, or vibration
• Helps restore proper alignment to doors, panels or trim that rely on factory hardware
• Useful when reinstalling an appliance after servicing or moving

• One installation hardware kit

• Follow the appliance's OEM installation instructions and torque recommendations
• Disconnect power and water before starting work
• Keep small parts away from children and pets; use proper tools to avoid stripping screws

This is a replacement mounting screw used to secure panels, trim, and small components in compatible appliances. Installing the correct screw restores a secure fit and helps stop rattling or loose parts. What it does:

• Secures panels, brackets, trim pieces or small assemblies to the appliance frame
• Prevents parts from shifting, vibrating, or producing rattling noises when in place
• Replaces missing, worn, or stripped fasteners that cause loose doors or misaligned trim
• Works with the original mounting points and thread types used by the manufacturer

• Always disconnect power or unplug the appliance before servicing to avoid electrical hazard.
• Use the correct screwdriver or bit to avoid stripping the head; do not overtighten.
• Keep track of small parts and compare the new screw to the old one before installation.

This door removal tool helps release and lift an oven door from its hinge pins so the door can be serviced or the inner glass replaced more safely. It provides stable support during door removal to reduce damage risk. What it does:

• Assists in releasing and lifting the oven door off its hinge pins for service or glass replacement.
• Stabilizes the door to help prevent sudden drops or shifting while removing or handling the door.
• Reduces the chance of scratching or chipping the door glass and oven frame during removal.
• Useful whenever the door must be removed for repairs, cleaning, or part replacement.

• Review the correct door-removal procedure before use.
• Ensure the appliance is powered off and fully cooled. Support the door with a second person if it is heavy.
• Use the tool only as described in the service instructions; improper use can damage the door or hinges and risk injury.

This installation hardware kit provides the mounting fasteners and brackets needed to secure the appliance during installation for a stable, code-compliant fit. Use it to complete new installs or replace missing hardware. What it does:

• Provides the mounting fasteners and brackets used to secure the appliance to surrounding cabinetry or floor
• Prevents shifting, tilting or excessive vibration after installation
• Enables proper alignment and stable operation following service or replacement
• Restores missing or damaged installation hardware so the appliance installs correctly

• Follow the appliance installation instructions and local codes; use only the fasteners supplied or specified by the manufacturer
• Disconnect power to the appliance before performing any installation or service that requires moving the unit
• Use appropriate tools and safety gear; some installations may require two people to safely position and secure the appliance
• If the appliance requires model-specific brackets or shims, confirm fit with the model's installation instructions before final installation

This factory fastener secures appliance panels and components. Use it to replace a missing, stripped, or corroded screw so brackets, covers, and assemblies stay tight and properly aligned, helping reduce vibration and rattling.

• Secures panels, brackets, and internal components in their proper positions
• Replaces missing, worn, or cross-threaded hardware
• Helps eliminate vibration and rattling from loose parts
• Supports proper alignment of covers and assemblies

• Disconnect power to the appliance before servicing; allow any moving parts to stop
• Match this screw to the location shown in your model's parts diagram
• Start threads by hand to avoid cross-threading, then tighten snugly with the correct driver
• Do not overtighten to prevent stripping threads or cracking plastic bosses