Refrigerator Trim Parts

This snack pan assembly is the shallow refrigerator drawer that stores snacks and deli items in the fresh food compartment. Replace a cracked or missing pan to restore smooth sliding access and reliable, contained storage.

• Organizes smaller food items in the fresh food section
• Slides within the shelf rails for easy access
• Replaces cracked, broken, warped, or missing drawer
• Helps prevent spills or items falling due to a damaged bin

• Unplug the refrigerator or disconnect power before servicing interior parts
• Remove contents, pull the old pan straight out, and lift the front to clear the rails
• Inspect/clean rails and supports; transfer any reusable trim from the old pan if applicable
• Align and slide the new pan into the rails until fully seated

This vegetable tray assembly provides the removable tray used in the refrigerator crisper area to support and separate produce. It restores a stable, easy-to-clean surface so drawers slide and store fruits and vegetables properly. What it does:

• Replaces a cracked, warped or missing crisper tray that supports produce in the refrigerator
• Restores a flat surface so fruits and vegetables sit securely and drawers close properly
• Helps maintain proper airflow and containment in the crisper area for typical produce storage
• Visible damage or a tray that no longer seats can cause items to fall or interfere with drawer operation

• Remove all food and the crisper drawer before installing; work on a clear, protected surface
• Align tray with the existing tracks or guides and slide into place until it seats
• Handle carefully to avoid chips or cracks if the tray is glass or brittle plastic
• Unplug the appliance or disconnect power first and follow all safety precautions

The Drawer Slide Rail is an OEM part compatible with Whirlpool refrigerators. This rail provides a smooth sliding mechanism that allows access to drawers such as the vegetable or freezer storage drawers. 

Causes of a bad Drawer Slide Rail could include damage or wear over extended use. Drawer components depend on their slide rails functioning properly to open and close smoothly without jamming or catching.

Symptoms of a faulty Drawer Slide Rail include:

• Drawers that are difficult to open and close 
• Drawers that do not fully open or extend out 
• Excessive noise or vibration coming from drawers

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This refrigerator crisper pan, also called the crisper drawer, stores fruits and vegetables in the fresh food compartment. Replace a cracked or missing bin to restore smooth sliding, tidy organization, and reliable produce storage.

• Organizes and contains produce in the crisper section of the refrigerator
• Slides on side rails for smooth opening and closing
• Works with the crisper cover/humidity control (if equipped) to help maintain proper storage conditions
• Typical symptoms: cracked or broken bin, damaged tabs or front lip, drawer falls off tracks, sticks, or won't close fully

• Remove food and any glass cover above the drawer; handle glass carefully
• Pull the old pan straight out and lift the front slightly to clear the stops
• Inspect and clean the rails/supports before installing the new pan
• Align the new pan on the rails and slide fully in; do not force

A replacement crisper drawer front panel that restores the appearance and proper closure of the refrigerator crisper compartment. Replaces a cracked, chipped, or damaged front to help the drawer sit and seal correctly. What it does:

• Replaces the damaged or worn front panel on the crisper drawer to restore fit and finish.
• Supports the crisper bin and helps the drawer slide and seat correctly in the cabinet.
• Helps reduce drafts and keeps produce contained when the original front is cracked or warped.
• Restores the refrigerator's interior appearance and eliminates cosmetic damage.

• Always unplug or switch off the refrigerator before beginning any repair.
• Remove food and the crisper drawer before installation; support shelves or components as needed.
• Basic hand tools (screwdriver) may be required; reuse existing screws/clips unless replacement hardware is specified.

This half-width crisper drawer is used with the Hammer Head shelf design. It replaces a cracked or missing bin so you can organize produce and other fresh items and slide the drawer smoothly on the shelf rails.

• Holds produce and other items in the fresh-food compartment
• Slides on the side rails under the Hammer Head shelf to restore proper drawer operation
• Common symptoms: cracked or broken bin, won't slide/seat correctly, falls off rails, missing drawer
• Helps contain spills and keep items organized

• Empty the old drawer and pull it straight out; lift slightly to clear the stops
• Align the new pan with the rails and slide it in until fully seated—do not force
• Verify the shelf and rails are correctly positioned and level
• If removing shelves or working near lights or wiring, disconnect power for safety

Pan frame assembly provides a sturdy support and positioning for the refrigerator's lower interior components, keeping drawers and pans level to help prevent misalignment and water pooling for smoother operation. What it does:

• Supports and aligns lower drawers, pans and slide tracks for reliable drawer movement
• Holds the drain/collector area in place so condensation and defrost water flow correctly
• Prevents sagging or uneven drawers that can cause binding or rubbing
• Reduces rattle or vibration from loose lower-cabinet parts

• Disconnect power to the appliance before starting any repair.
• Remove food, drawers and shelves as needed for access and to avoid damage.
• Use basic hand tools and follow OEM diagrams; align tabs and secure hardware snugly without over-tightening.
• Inspect surrounding clips and seals during replacement and replace any damaged components.

This track pan replaces the damaged or worn snack/deli drawer pan so food stays contained and organized inside the refrigerator. It restores proper sliding and helps prevent spills and food contamination. What it does:

• Provides a shallow sliding pan for deli, snack or small-item storage
• Supports smooth in-and-out sliding of the drawer and helps keep contents contained
• Replaces cracked, warped, or broken pans that cause sticking or spills
• Helps maintain an organized refrigerator interior and makes cleaning easier

• One track pan

• Disconnect power to the appliance before beginning any work
• Empty and remove the existing drawer and pan before installing the replacement
• Slide the new pan into the same track position until it seats; verify smooth operation
• If the track or mounting hardware is damaged, replace those parts as well.

This replacement meat pan is the oven broiler/drip pan that catches drippings and supports roasts and other meats while cooking. It helps contain spills and reduces mess for easier cleanup and safer broiling. What it does

• Catches grease and drippings to protect the oven floor and prevent smoking or flare-ups.
• Supports roasts and broiled foods for even exposure to heat.
• Helps contain juices for easier cleanup after cooking.
• Replace if pan is warped, cracked, heavily corroded, or missing, which can cause uneven cooking or excess smoke.

• Allow the oven to fully cool before removing or installing the pan; use oven mitts or gloves to avoid cuts.
• Usually installs by sliding into oven broiler shelf/support; no tools typically required.
• Clean with non-abrasive cleaners to preserve finish; avoid harsh scrubbing that can damage the surface.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Replacement crisper pan for refrigerators that provides a flat, removable surface to hold fruits and vegetables and helps contain spills for easier cleaning and storage. What it does

• Holds produce and other refrigerated items securely in the crisper compartment.
• Contains spills and drips to protect the compartment below.
• Helps restore usable storage when the original pan is cracked, broken, or missing.
• Reduces mess and makes drawer cleaning faster.

• Remove all food from the crisper drawer before replacing the pan.
• Slide the old pan out, wipe the compartment clean, then position and slide the new pan into place.
• Most replacements are straightforward and require no tools; if the pan does not seat properly, check the refrigerator's parts diagram.

This support is the structural piece that holds and aligns a shelf, rack, or panel within your appliance. Replacing a worn or broken support restores proper fit and stability to prevent wobble, sagging, and related damage. What it does:

• Provides stable mounting and positioning for the associated shelf, rack, or component
• Helps maintain alignment so parts sit or slide correctly
• Replace if cracked, deformed, loose, or missing
• Symptoms can include a component that sits unevenly, drops, or won't stay in place

• Includes 1 support

• Disconnect power to the appliance before servicing
• Allow any hot surfaces to cool; wear cut-resistant gloves
• Note the orientation of the original part; reuse existing fasteners if applicable
• Ensure the support is fully seated and secure before returning the appliance to use

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

This drain pan collects defrost and condensation water beneath the refrigerator to help prevent leaks and water damage. It replaces a cracked, warped or corroded pan so moisture can evaporate safely. What it does:

• Collects defrost and condensation water that drains from the evaporator/coil area
• Directs water to the evaporator or evaporation area so it doesn't pool under the cabinet
• Helps prevent flooring damage and corrosion caused by leaks
• Common symptom: visible water or puddling under or behind the fridge
• Common symptom: musty odors or visible corrosion around the base

• Disconnect power to the appliance before starting any work.
• Many installs require removing the lower access panel or toe-kick and carefully sliding the cabinet forward; support the unit as needed.
• Handle edges and mounting tabs with care to avoid cuts; replace any worn mounting clips or seals.
• If corrosion or other damage is present, inspect surrounding components for related issues.

The meat tray assembly is the shallow deli drawer inside your refrigerator. Replace it to restore clean, organized storage and smooth sliding when the original bin is cracked, broken, warped, or missing.

• Provides a dedicated compartment for deli meats and cheeses beneath a refrigerator shelf
• Slides on shelf rails for easy access and organization
• Common failure symptoms: cracked or broken bin, damaged tabs, drawer won't slide or stay on tracks, or missing drawer
• Restores proper fit so shelves and doors operate without interference

• Unplug the refrigerator and remove items from the affected shelf area
• Pull the old deli drawer straight out; lift to clear the rails and remove
• Align the new tray with both tracks and slide it fully in until seated
• Do not force or overload; inspect shelf rails/supports for damage before reuse