Refrigerator Clean Touch Parts

This decor assembly is the outer trim that surrounds the appliance control panel, restoring the unit's finished appearance and protecting the controls from everyday wear. It replaces cracked, scratched or faded trim to make the front look like new. What it does

• Covers and protects the control area from spills, scratches and cosmetic damage
• Restores the appliance's factory appearance after impact or deterioration
• Helps keep buttons and touch controls clear of debris and grime
• Required to properly seat or secure the control components it surrounds

• One decor assembly (control-panel trim) as pictured

• Disconnect power (unplug or shut off breaker) before starting work
• Remove any retaining screws or clips from the control panel; handle trim gently to avoid breaking tabs
• Reuse existing fasteners unless new hardware is explicitly listed as included

This electronic control board replaces the appliance's console control module to restore normal user interface and electronic function. It manages timed cycles, user inputs and sends signals to the main components for correct operation. What it does:

• Interprets button/knob inputs and runs selected cycles or modes
• Sends control signals to heating, motor, valve or compressor circuits as required
• Helps correct symptoms like unresponsive controls, failure to start, or erratic cycle behavior
• Replaces a failed or damaged console control to restore reliable electronic control

• One electronic control board

• Disconnect power before servicing to avoid shock or damage
• Handle the board by its edges and avoid touching components or connectors
• Verify connector locations and wire routing matches the original during reassembly

This water filter manifold assembly holds the MSWF cartridge and routes water through the refrigerator's filtration system to the dispenser and icemaker. Replacing a damaged filter head restores a secure seal and consistent water flow.

• Provides the twist-lock mount and seal for the MSWF filter cartridge
• Connects inlet and outlet lines to direct filtered water to the dispenser and icemaker
• Common failure symptoms: leaks around the filter head, low or no dispenser flow, icemaker not filling, or the filter not seating/locking properly
• Designed specifically for refrigerators that use the MSWF filter style

• Disconnect power and shut off the water supply before servicing
• Dispense water to relieve line pressure; place a towel to catch residual water
• Remove the MSWF filter; transfer mounting hardware and line connections to the new assembly one at a time to maintain orientation
• Restore water and power; check all connections for leaks and run water to purge air from the system

This water filter installation kit contains the fittings needed to install or replace a refrigerator water filter assembly, restoring proper connections and helping prevent leaks at the filter interface. What it does

• Provides the connection fittings and hardware used to attach a refrigerator water filter assembly to the appliance water line.
• Re-establishes sealed water flow where old or damaged installation parts caused leaks.
• Can address issues like reduced or intermittent water flow when caused by missing or broken filter fittings.
• Works with the refrigerator's existing water line and filter housing.

• Turn off the refrigerator water supply before beginning; relieve pressure by dispensing water until flow stops.
• Follow the refrigerator manufacturer's installation instructions and use only parts specified for your model.
• Inspect tubing and connections for damage; replace any worn components to ensure a proper seal.

Replace a clogged or damaged vent grease filter to keep your appliance drawing properly. This filter captures airborne grease and cooking particles to protect the blower and help maintain effective ventilation over your cooktop.

• Traps grease and particulates pulled through the ventilation stream during cooking
• Helps protect the blower and internal components from buildup
• Supports proper airflow and smoke/odor capture from the cooktop area
• Replace if torn, warped, heavily saturated, or when cleaning no longer restores performance

• Disconnect power to the appliance before servicing
• Open the vent grille or filter access and release the retaining tabs/handle
• Note orientation; seat the new filter fully and latch securely
• Do not operate the vent without a grease filter installed

This housing assembly is the outer cabinet component that supports and protects internal appliance parts, restoring structural fit and appearance. Use it to replace cracked or damaged housings that expose internal components or cause misalignment. What it does:

• Replaces the appliance's outer housing to restore proper fit and protection
• Protects internal wiring, controls, and mechanical parts from damage and debris
• Helps correct alignment issues caused by a warped or broken cabinet
• Reduces rattles and vibration when the original housing is damaged

• 1 housing assembly

• Designed to mount to the appliance frame; some trim or panels may need temporary removal
• Inspect surrounding seals, fasteners, and clips; replace any damaged hardware
• Use appropriate hand tools and disconnect power before beginning work

Vessel water filter that replaces the refrigerator's vessel-style cartridge to restore filtered water delivery and reduce visible particles, off tastes and odors at the dispenser and ice maker for clearer, better-tasting water. What it does:

• Filters water flowing through the vessel cartridge to reduce sediment and visible particulate in dispenser output.
• Helps improve taste and odor commonly noticed when a filter is aged or clogged.
• Addresses symptoms such as discolored water, stray particles in dispensed water, or unpleasant dispenser/ice taste.
• Restores expected filtration performance when an old or saturated vessel cartridge is the source of water-quality complaints.

• Turn off the refrigerator water supply and before beginning replacement.
• Remove the old vessel cartridge per OEM instructions and install the new filter in the same orientation.
• After installation, run the water dispenser until the water runs clear to purge air and any loose media.
• If you see leaks or continue to have water-quality or flow issues after replacement, shut off the water.

This replacement air filter helps reduce odors and keeps the refrigerator interior smelling fresher by filtering refrigerator air circulation. It installs in the cabinet air path and is a direct-fit replacement when specified by your model. What it does:

• Traps and helps reduce common food and household odors in the refrigerator compartment
• Helps maintain fresher-smelling interior air, improving overall storage conditions
• Restores designed air circulation where a clogged or missing filter causes noticeable odors
• Simple passive filtration—no electrical connection or electronics

• Install in the designated refrigerator cabinet/filter slot per the owner's manual; orientation may matter
• Remove old filter and dispose of properly before installing the new filter
• Use gloves if desired; avoid forcing the filter into place to prevent damage

The water filter head holds the water filter and connects the water lines to the water filter. Approximate dimensions: 4.4" x 4.05" x 2.5"

This filter uses a dense engineered carbon filter media rated NSF 42 and 53 for the reduction of waterborne contaminants such as asbestos, atrazine, chlorine, cysts, lead, mercury, toxaphene, turbidity, and sediment. It has a filter life of 6 months or 300 gallons and features an easy twist-and-lock style technology that fits easily underneath your sink. Dimensions: 2 inches x 8 1/2 inches. Flow Rate: 1 GPM.

The Frigidaire Smart Choice Refrigerator Inline Water Filter filter connects to the incoming water line so it works with any refrigerator. Includes 1 inline water filter and two 1/4 in. brass compression fittings. Carbon block filter reduces chlorine taste and odor, improving taste and clarity of ice cubes and drinking water.

Replacement chlorine taste-and-odor filter kit that restores fresher-tasting water and ice by reducing chlorine-related taste and odors. Installs into compatible refrigerator filter housings to refresh the appliance water supply. What it does

• Reduces chlorine taste and odor to improve drinking water and ice flavor.
• Addresses common symptoms such as water or ice that tastes or smells like chlorine.
• Restores filtered water performance when the existing cartridge is exhausted or aged.
• Works with the refrigerator's filter housing to provide on-demand filtered water.

• Follow the refrigerator owner's manual for the correct replacement procedure and any model-specific steps.
• Turn off the water supply to the refrigerator if the manual recommends it before replacing the cartridge.
• After installation, flush the filter per the manufacturer's guidance by running dispenser water until clear to remove air and loose carbon particles.

Control panel overlay that replaces worn, faded, or damaged printed labels on the console. Restores readable button markings and a factory look while protecting the underlying control surface from everyday wear. What it does:

• Replaces the printed graphic layer on the console so buttons and settings are easy to read.
• Protects the control surface from scratches, spills and wear.
• Helps resolve symptoms like faded or peeling labels and unclear button legends.
• Maintains the original appearance and layout of the control area.

• Disconnect power (unplug or switch off breaker) before servicing the appliance.
• Remove the console or trim carefully to avoid damaging switches, clips or wiring; adhesive may need to be softened or cleaned.
• Handle the overlay by the edges to avoid fingerprints on the printed surface; use appropriate cleaners and let adhesives fully set before reuse.

this is not a filter. The water filter bypass attaches in the water filter head and allows the water to flow to the dispenser and ice maker when the filter has been removed. Approximate dimensions: 4.37" x 2.87" x 2.5"

This manifold assembly routes and distributes incoming wash water to the dishwasher's spray arms and wash zones, restoring proper water flow for effective cleaning. Designed to replace a worn, cracked, or leaking manifold and return consistent wash performance. What it does:

• Directs incoming water to the spray arms and wash chamber for normal wash cycles
• Replaces cracked or damaged manifold that can cause leaks or weak spray performance
• Helps restore proper water flow when one or more spray arms receive little or no water
• Works with the dishwasher's valves and hoses to maintain sealed water pathways

• One manifold assembly

• Turn off power and water to the appliance before beginning repair
• Inspect and replace any worn O-rings, gaskets or hoses when installing the manifold
• Tighten fittings to manufacturer torque recommendations and test for leaks after reconnecting water