Room Air Conditioner Cold Pump Hose Parts

This replacement exhaust hose vents hot discharge air from a portable air conditioner through the window kit, restoring proper airflow and cooling performance when the original hose is cracked, collapsed, leaking, or missing.

• Directs hot air from the unit to the outdoors via the window panel
• Helps maintain correct airflow and cooling efficiency
• Replaces a damaged, brittle, or collapsed vent hose
• Symptoms may include poor cooling, warm air leaking into the room, or the hose detaching

• Unplug the unit and allow it to cool before service
• Remove the old hose from the rear outlet and window panel couplers
• Seat and lock the new hose fully onto each coupler per your model's design
• Route the hose as short and straight as possible; avoid kinks or sharp bends for best airflow

This is the indoor fan motor for a room air conditioner. It drives the evaporator-side blower wheel to move cool air across the evaporator coil and into the room, restoring proper airflow and cooling performance.

• Powers the indoor blower wheel to circulate conditioned air
• Helps maintain correct airflow across the evaporator coil
• Common failure signs: fan won't run, slow or intermittent airflow, humming from motor, or overheating/shutdown
• May also be indicated by uneven cooling or the unit icing up due to poor airflow

• Unplug the unit and discharge capacitors before service
• Remove the front panel and access cover to reach the motor and blower
• Note wire positions; transfer mounting hardware and fan wheel as required
• Verify free-spinning blower and secure wiring before reassembly and test

This fan motor powers the fan blade or blower wheel to move air through the unit. Replacing a worn or seized motor restores airflow and heat transfer, helping the system maintain proper temperatures and operate reliably.

• Rotates the fan to circulate air across coils and components
• Supports correct cooling performance and helps prevent overheating
• Reduces noise and vibration caused by a failing motor
• Typical symptoms: fan not running, weak airflow, loud humming/squealing, intermittent operation, or a burning odor

• Disconnect power before servicing and allow components to cool
• Note and label all wire connections; take a photo for reference
• If a start/run capacitor is present, discharge it safely before handling
• Wear cut-resistant gloves; transfer any brackets or grommets from the old motor as required and verify free blade rotation after install

This adapter is a small connector used to join compatible appliance lines or fittings, restoring a secure connection and preventing leaks or loss of function. It's a direct replacement when the original adapter is cracked, corroded, or damaged. What it does

• Connects two mating hoses, tubes, or fittings to re-establish a sealed pathway
• Restores proper flow and helps stop leaks from worn or broken adapters
• Commonly used where a compact, durable coupling is required
• Works as a like-for-like replacement when the original adapter is missing or damaged

• One adapter

• Disconnect power and shut off water or supply lines before servicing
• Verify matching thread type/orientation before installation to avoid cross-threading
• Hand-start threads, then tighten to manufacturer torque; do not overtighten
• Inspect for leaks after restoring power/supplies and running the appliance

The Motor Fan is an OEM part for GE air conditioners. It circulates air throughout the unit, ensuring efficient cooling performance. This motor fan contributes to the appliance's ability to maintain a consistent, cool temperature in your space. 

Over time, the motor fan can wear out or become damaged due to continuous use, leading to a decrease in air conditioner performance.  

Symptoms of a bad Motor Fan include:

• Reduced airflow from the air conditioner
• Unusual noises coming from the unit, such as grinding or buzzing sounds
• The air conditioner fails to cool the room effectively
• The unit overheats or shuts off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This evaporator fan motor circulates cold air across the evaporator coil so your refrigerator cools evenly and prevents frost buildup. Replaces a worn or noisy fan motor to restore normal airflow and temperature consistency. What it does:

• Spins the evaporator fan blade that moves cold air through the freezer and refrigerator compartments
• Helps maintain consistent temperatures and improves cooling performance
• Reduces or stops rattling, humming, or no-air symptoms caused by a failing motor
• Keeps frost from accumulating on the evaporator by maintaining proper airflow

• One evaporator fan motor assembly

• Disconnect power before servicing to avoid electric shock
• Access may require removing interior panels or the evaporator cover; follow your model's service manual
• Handle the fan blade and motor carefully to avoid bending blades or damaging the shaft