-12C Parts

This part is a replacement camshaft. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. It is intended to replace a defective or broken camshaft in various models of outdoor power equipment.The camshaft is important as it closes and opens the equipment's exhaust and intake valves. This part is a critical engine component and thus should be replaced if faulty in any way. Make sure to drain the fuel tank and disconnect the spark plugs before attempting to install this part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this camshaft, the appropriate owner's manual and equipment diagrams should be referred to. This camshaft is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with outdoor power equipment models that have been manufactured by Midwest Engine, MTD, Craftsman, and other brands.

This part is a replacement screw. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. If the current screw is defective or lost, this part can be used as a replacement. It is intended for use with outdoor power equipment.Screws are an essential piece of standard hardware that secures together different components. If the current screws are lost, corroded, stripped, or ineffective, they will need to be replaced with a genuine OEM part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is suitable for use on outdoor power equipment manufactured by Midwest Engine, Briggs and Stratton, other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is a replacement for a blower housing on select models of engines used in blowers and vacuums. The blower housing is a durable plastic part that holds the blower hose for intake and outflow of the air in the machine. This is where the fan will be located that creates the vacuum to suck air into or out of the unit and provide the proper operation. if the blower housing is damaged, broken, or otherwise not working, the unit may not function at all. This genuine OEM part is a replacement that is manufactured to exact standards by Briggs and Stratton. It can also be used in select models from Toro. It is going to be the solution for anyone who needs a new blower housing for their unit. This piece is sold as an individual assembly and does not include related parts or hardware; those will require a separate purchase. The blower housing will require screwdrivers to replace. Always wear gloves and disconnect the power supply before performing repairs like this. It will also be a good idea to work in a well-ventilated area and allow the unit to cool to avoid burns or other issues.

This hub cap is a genuine MTD part. It is a replacement part for various makes and models of self-propelled walk-behind lawn mowers, certain edgers, and lawn mowers. This hub cab is beige and has a hole and spokes on it. The hub cap attaches to the outside of the wheel and tire. While its function is decorative, the hub cap is primarily there to protect the fasteners and other parts behind it.It is normal for the hub cap to become damaged through normal wear and tear or to need replacement after being damaged in an accident. It can be especially prone to be hit by rocks and other debris. No disassembly of the mower deck or engine is required to make this repair, but be sure to disconnect the spark plug to prevent the motor from accidentally powering on.This hub cap is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with equipment manufactured by Cub Cadet, Yard Machines, and MTD.

This spacer is a genuine MTD part. A spacer can be used as a replacement part in a lawn mower or a log splitter. The purpose of this genuine OEM part is to reduce friction between one or more components while also keeping the components apart from one another.The spacer is a small fastening component that can be easily lost or misplaced without notice for a variety of reasons. If the spacer is damaged, it should be immediately removed and replaced.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This spacer is compatible with equipment manufactured by MTD, Craftsman, Troy-Bilt, Yard Machines, Yard Man, Turf King, and MasterCut.

This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.

This replacement part is a switch key. This is a genuine replacement part made by Midwest Engine. This part is commonly found installed within certain lawn mowers and is able to ensure that the user can turn the machine on and off according to the desired settings. A new switch key might be needed if the current one is unable to turn the machine on or off. This can be caused by normal wear and tear over time. If the key is no longer working, it can be due to this part being damaged. This should be a fairly simple repair and should only use common household tools. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine replacement fuel line for use with Briggs & Stratton engines. This part is responsible for carrying the fuel from the tank to the fuel pump. The fuel line is attached to both the tank and carburetor using special clamps which hold it tight while making a water-tight seal. The clamps are included.The fuel pump is made of high-grade rubber, however, if left out in the weather, it will begin to break down, causing fuel to leak. Exposure to the elements is the most common cause of damage to this part.Replacing the fuel line is simple. Before replacing, ensure the fuel has been removed from the tank, or prepare a container to receive the fuel one the old line is removed from the tank. Using a clamp tool, release the clamp holding the fuel line and slide it from the fuel tank, and then do the same thing on the other end. When installing the new line, slide the clamps onto the line before placing on the mower. Then, using the clamp tool, slide the clamps into place. This fuel line is a genuine OEM replacement part. It is compatible with many Briggs & Stratton models and is sold individually.

This is a flywheel key that is used in many types of lawn and garden equipment. It is fits into a slot located on the crankshaft. It also aligns with the keyway found on the flywheel. This flywheel key is tasked with ensuring the flywheel makes rotations in time with the crankshaft. The key can become damaged or lose and will need to be replaced to ensure the lawn equipment can continue to be used.Inspecting the flywheel key involves removing the gas tank and cowl from the equipment. From there, a user can determine whether the part is damaged or broken. If it needs to be replaced, the part can be removed from the flywheel, and a new flywheel key can be installed. The process takes little time and requires only a nut driver and a wrench set. Make sure to reassemble all parts before using the tool.This flywheel key is an authentic OEM replacement component sourced directly from the manufacturer. It is sold as a single part. The key can be used with wood chippers, leaf blowers, tillers, and lawnmowers manufactured by Simplicity, Briggs & Stratton, Cub Cadet, and Snapper.

This sealing washer is a genuine Midwest Engine part, sold individually. This sealing washer can be used as a replacement part for a variety of small engine outdoor appliances including chipper shredders, lawn mowers, and tillers. The purpose of a sealing washer is to create space between fastening components so they are not damaged by friction.The sealing washer of an outdoor appliance might have to be replaced if it is lost, misplaced, or damaged to the point that it cannot serve its function. The sealing washer could be stripped over time from general wear and tear or, as it is a small part, can be lost or misplaced easily. If this occurs, the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This sealing washer is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, and Cub Cadet.

This replacement part is a carburetor overhaul kit. This kit includes multiple parts that are needed to rebuild or repair a damaged carburetor.Be sure to diagnose the issue before purchasing this kit to ensure that the needed parts are included. A damaged carburetor may cause hard starting or black smoke exhaust during use. Wear work gloves when working with the carburetor. The engine should be powered down and cooled off before starting this job.This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.

This bowed washer is a genuine MTD part, sold individually. This bowed washer can be used as a replacement part in a lawn mower. The purpose of the bowed washer in a lawn mower is to serve as a component within the general fastening mechanisms of the lawn mower so that friction can be reduced between two or more components and spacing is created between the components.The bowed washer in a lawn mower might have to be completely replaced at one or more points within the typical lifespan of the lawn mower; this could occur if the bowed washer is damaged from general wear and tear with long-term use or has been lost or misplaced. If the bowed washer has been stripped away or has fallen out of its place and cannot be found, the bowed washer should be replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bowed washer is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Craftsman.