10Dm Parts

This is a general use replacement screw. It is a standard piece of hardware for securing various components on lawn and garden equipment that will have multiple locations and uses based on the equipment model. Owners should refer to diagrams for proper location and application of this part. As a securing tool, this screw can become worn over time. The threads can strip or the screw can become lost during other repairs. This is when a replacement may be needed. Because this is a general-use part, it might be a good idea to keep a few extras on hand. This genuine replacement screw is designed for use with Briggs & Stratton, Toro, and Murray lawn and garden machines, including over 150 models of generators, tractors, snowblowers, and pressure washers. The screw can be replaced with a wrench in all applications and should only take a few minutes to fix. This durable screw is made of sturdy metal and sold as a single unit. Those who need additional screws will have to order multiple quantities.

This replacement crankcase gasket is a genuine OEM part designed for a range of different small gas-powered lawn appliance engines. It is commonly found in tillers and lawn mowers. The crankcase is a housing for the crankshaft, which receives reciprocal motion from the pistons and transforms it into rotation motion. This gasket helps seal the crankcase to create an airtight chamber and prevent oil from leaking so that the crankshaft can operate smoothly. As the engine runs, it produces a lot of heat and gases that eventually wear on gaskets. Over time, all of this stress can cause a gasket to degrade and break its seal. If this happens, oil will leak from the crankcase, the engine will easily overheat, and greyish white smoke will visibly blow out from the exhaust pipe. Replacing a crankcase gasket will require disassembling much of the engine, as it is an internal part, so we recommend following the owner's manual or consulting the manufacturer's website for instructions. This part is a high-quality replacement gasket manufactured to exactly match the specifications of the original part. It is compatible with Toro and Briggs & Stratton engines and ships individually.

The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.

This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.

This replacement part is a switch key. This is a genuine replacement part made by Midwest Engine. This part is commonly found installed within certain lawn mowers and is able to ensure that the user can turn the machine on and off according to the desired settings. A new switch key might be needed if the current one is unable to turn the machine on or off. This can be caused by normal wear and tear over time. If the key is no longer working, it can be due to this part being damaged. This should be a fairly simple repair and should only use common household tools. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine replacement fuel line for use with Briggs & Stratton engines. This part is responsible for carrying the fuel from the tank to the fuel pump. The fuel line is attached to both the tank and carburetor using special clamps which hold it tight while making a water-tight seal. The clamps are included.The fuel pump is made of high-grade rubber, however, if left out in the weather, it will begin to break down, causing fuel to leak. Exposure to the elements is the most common cause of damage to this part.Replacing the fuel line is simple. Before replacing, ensure the fuel has been removed from the tank, or prepare a container to receive the fuel one the old line is removed from the tank. Using a clamp tool, release the clamp holding the fuel line and slide it from the fuel tank, and then do the same thing on the other end. When installing the new line, slide the clamps onto the line before placing on the mower. Then, using the clamp tool, slide the clamps into place. This fuel line is a genuine OEM replacement part. It is compatible with many Briggs & Stratton models and is sold individually.

This is an air cleaner foam filter that is used in several lawn mowers by major manufacturers. The air cleaner filter is responsible for catching dirt, dust, and debris before it can enter into the tool's engine. The air filter can become damaged or dirty and will need to be replaced on a regular basis. If the air cleaner foam filter is not working the way it should, the engine may not turn on or could run poorly. If the filter lets dirt pass through to the motor, the engine could be damaged.The air cleaner foam filter should be visually inspected regularly to determine whether it is damaged or overly dirty. It should also be replaced at least once a year. If the lawnmower is used frequently, a replacement may be needed more often. Take off the lid over the filter before removing it. Insert the new part and replace the lid before using the mower.This air cleaner foam filter is an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual component. The foam filter is compatible with lawn mowers manufactured by Toro and Briggs & Stratton.

This oil seal is used in a range of small engines, such as those found in lawnmowers. It ensures the oil stays inside of the crankcase and seals the shaft to provide the correct engine pressure. The seal also reduces the risk of leaks.Over time, oil seals will wear out and need to be replaced. They could crack, break, or shrink. This could result in leaks, and engine performance could be affected. Whenever servicing the case, it is recommended to check and replace the oil seals. Both seals and gaskets should be inspected as part of routine maintenance. To perform the replacement, pliers, a wrench set, and a screwdriver will be needed. The engine needs to be cool and the oil needs to be drained before making the replacement.The oil seal is made from durable, high-quality rubber. This is a genuine OEM replacement part that can be used in a wide range of small engines and lawn mowers from Briggs & Stratton and Toro. The oil seal is sold individually.

The stop wire is a safety cable device offered on many types of lawn and garden equipment. It is pressed near the upper handle of a device to start it, which lets the blades spin and creates forward motion on equipment that is self-propelled. A stop wire can stretch out over time and will need to be replaced to ensure total safety. If the blade brake control is released and the blades continue to spin for more than a couple of seconds, the wire needs to be replaced.Take the equipment and put it on a flat surface before taking the metal on the stop cable and moving it out of the mower handle. Squeeze the center tabs of the wire with needle-nose pliers and pull the cable end through the bracket. Pull the other end out and then replace it with a new component.This is an authentic OEM replacement part for use with garden equipment engines. It is an individual part that is sourced directly from the manufacturer. This part is compatible with lawnmowers, wood chippers, snowblowers, generators, log splitters, tillers leaf blowers, and pressure washers by Briggs & Stratton, MasterCut, Craftsman, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Murray, and Wheel Horse.