1102803 Parts

This plate stator is the stationary motor plate used in compatible Whirlpool appliance motor assemblies. It supports the motor's stationary components so the motor can run smoothly and reliably. What it does:

• Secures and positions the motor's stationary winding and magnetic components
• Helps maintain correct air gap between rotor and stator for proper motor function
• Can contribute to noisy motor operation or failure-to-start when damaged
• Supports consistent motor rotation and reduces abnormal vibration

• Disconnect power to the appliance before starting any repair.
• Removal typically requires disassembly of the motor housing; retain fasteners and note orientation.
• Handle carefully—edges and mounting holes can be sharp and fragile.

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

• Fastens panels, brackets, or small components in place
• Replaces missing, stripped, or damaged screws that cause loose parts
• Helps stop rattling, vibration, or misaligned panels
• Restores secure connections after repairs or part replacement

• One mounting screw

• Unplug the appliance or disconnect power before starting work
• Use the correct screwdriver bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized so you can reuse existing screws when applicable

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This control knob replaces a worn or broken range/oven front knob to restore tactile control and clear temperature/setting selection. It gives a secure fit so you can safely set burners or oven functions. What it does:

• Replaces a damaged or missing control knob to restore manual control of burners or oven settings
• Provides a clear pointer for accurate selection of heat levels and functions
• Snaps on to the stove/range control shaft for reliable operation
• Helps eliminate slipping, stripped splines, or loose turning caused by a worn knob

• One control knob as shown

• Turn power and gas supply off before servicing; follow appliance safety guidance
• Pull off the old knob straight from the control shaft and push the replacement fully onto the shaft until it seats
• If knob does not fit, do not hammer or modify the shaft

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This genuine replacement mounting screw secures appliance panels and components so assemblies stay aligned and stable during normal use. Use it to replace lost or damaged fasteners and restore safe, rattle-free operation. What it does

• Secures panels, brackets, and small components to the appliance frame
• Prevents loose parts, vibration noise, and misalignment of assemblies
• Restores proper fit where a missing or stripped screw caused gaps or rattles
• Matches original fastening point size and head style for correct engagement

• Use the matching driver bit and moderate torque; overtightening can strip threads or damage parts
• Replace any stripped or damaged mating hardware; do not force a screw into a damaged hole
• Disconnect power or follow appliance-specific safety steps before working near electrical components

This hex nut secures mating threaded fasteners on appliance assemblies to keep panels and components stable during normal use. It provides a simple, removable connection for service and repairs. What it does:

• Threads onto a matching bolt or stud to hold panels, brackets, or components in place
• Prevents parts from coming loose, reducing vibration and rattling
• A worn or missing nut may cause loose panels, misalignment, or intermittent operation of attached components

• Disconnect power and water before servicing the appliance
• Use the correct socket or wrench size to avoid rounding the nut
• Tighten to a snug fit; avoid overtightening which can strip threads or deform parts
• Replace any fastener with damaged threads or corrosion to ensure secure fastening

This rubber bumper cushions and protects appliance components, reducing noise, vibration and wear where parts contact the cabinet or other surfaces. It helps keep moving panels and assemblies aligned for quieter, smoother operation. What it does:

• Acts as a shock absorber to dampen vibration and noise
• Prevents metal-to-metal contact that can cause wear or chipping
• Helps maintain proper spacing and alignment of doors, panels or moving parts
• Commonly used where a soft, durable stop is needed to protect surfaces

• Install in the original mounting location; ensure bumper seats fully against the surface
• Clean mounting area of dirt and old adhesive or debris before installing
• No special tools typically required; use gentle pressure to press into place or light adhesive if the OEM design calls for it
• Disconnect power to the appliance before attempting repairs that require access behind panels

A right-side hinge spring that restores proper door tension and smooth hinge action. Replaces a worn or broken spring to help doors close evenly and stay aligned for normal operation. What it does

• Provides restoring tension on the right door hinge so the door opens and closes smoothly.
• Corrects sagging or misaligned doors caused by a weakened or broken hinge spring.
• Reduces noisy or stiff hinge movement that can occur with worn components.
• Helps maintain an even door gap for proper sealing and appliance performance.

• Disconnect power and remove any stored items from the door before starting work.
• Support the door while removing/installing the spring to prevent sudden drops or pinching.
• Use basic hand tools; avoid forcing components—replace damaged hinge hardware as needed.