131596000 Parts

The roll pin, also called a shear pin, is a slender metal piece that fastens the driveshaft to the auger of a snowblower. This pin actually does double duty as a safety device. When moving through the snow-covered ground where objects cannot be seen, sometimes the snow-moving auger will come into contact with something other than snow. Since the driveshaft of the blower will continue to turn regardless of the mobility of the auger, the auger would be destroyed or significantly damaged upon encountering such an object. The roll pin is designed to shear off when the auger suddenly stops so the working parts of the blower are not damaged. Most blowers are designed so that the pins are easily accessible. By rolling the blower so the belly plate is up, it is easy to remove the belly plate and see where the shear pin goes through the driveshaft and connects with the auger. The broken piece of the old pin can be forced through by the new pin by gently tapping it with a hammer. This OEM genuine replacement part is compatible with a number of snowblowers, including Craftsman, Troy-Bilt, MTD, Yard Machines, and Yard-Man.

This replacement part is a snap ring. This is a genuine replacement part made by MTD. This part acts as a fastener and is used to hold certain components within the machine together. This ensures that the appliance is working efficiently and smoothly during use. A new snap ring might be needed if the current one is visibly damaged or no longer able to stay attached. If the ring has become stripped over time, it might be best to replace it. This should be a simple repair and only require common household tools such as screwdrivers or pliers. Refer to the owner's manual for more information on how to repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine replacement shift fork assembly that is designed for use with outdoor lawn tractors and lawn mowers. The shift fork assembly is designed to work to slide the gears into and out of place to engage the various drive settings of the lawn mower and shift gears in a manual transmission. It is not unusual for this part to become bent or develop other signs of wear over time. If the shift fork becomes damaged or wears down, it will not be able to shift gears properly until a replacement is made. This OEM part is manufactured to exact standards. MTD makes the part and it is compatible with select models from this brand, as well as certain models from Bolens and Husky. Be sure to disconnect the power to the unit before performing any engine or transmission repairs. Operating a machine with a faulty shift fork assembly could lead to bigger problems with the transmission and engine, which is why an urgent replacement is necessary. This part is made of durable metal and sold individually.

This oil seal is a genuine MTD part, sold individually. This oil seal can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, chainsaws, and wood chippers. The oil seal partitions off the internal components from the external components so oil leakages do not occur.The oil seal in an outdoor appliance might have to be replaced if the component is torn, ripped, or punctured. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This oil seal is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard-Man, Yard Machines, Huskee, Montgomery Wards, MasterCut, and Turf King.

This is a simple set of lawnmower ignition keys. They’re also used for an array of riding mowers, lawn tractors, and even snowblowers. To simplify repair and replacement procedures, most manufacturers use standardized keys for all their machines in a given class. As a result, a single key can be used for dozens of machines. The keys are manufactured from stainless steel, with an INDAK logo stamped into the center. Regardless of whether the machine is a walk-behind mower or a full-sized lawn tractor, a keyed ignition is easier to operate than a recoil cord. Similarly, replacing a key is generally straightforward. The exception is if the old key has snapped off in the ignition. In this case, a set of needle-nosed pliers can sometimes be used to extract the key. A powerful magnet can also be helpful if the broken key is being stubborn. In the worst-case scenario, the ignition may need to be replaced. This is an OEM part sourced directly from MTD, and it is sold as a set of two.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This is a flat washer with an inner diameter of .469 inches. The washer is a replacement part that is for use with types of lawn and garden equipment. Flat washers help to increase the size of a screw's bearing surface area. It will help to reduce the surface pressure that is applied when the pieces are fastened together, and it will help to protect the pieces being connected.The flat washer is made from metal, which means it is durable. However, even metal can start to wear away over time. It could become thinner, corrode, or even become cracked. When this happens, owners will need to replace the washer. In some cases, the washers might become lost when working on the machine. Getting a new washer to replace any that are missing is essential.The flat washer will work with a range of select machines including tillers, lawn tractors, snowblowers, cultivators, and mowers from Yard-Man, Troy-Bilt, Ryobi, MTD, Bolens, Yard Machines, Husky, and Cub Cadet. The washer is sold individually and is a genuine OEM replacement part.

This part is a replacement flat washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged, misplaced, or defective flat washer in a variety of power equipment. Flat washers are a standard piece of hardware with many different uses. Their primary purpose is to increase the bearing surface area of a screw. This can help to prevent screws from becoming loose over time due to pressure that leads to them sinking into the surface. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this flat washer, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this flat washer is suitable for use on several different models of small engine outdoor power equipment manufactured by MTD, Murray, Craftsman, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a washer. This part is small but important in various types of equipment. Washers work with other small parts like screws and nuts to ensure that multiple parts are secure and in place during use.A new washer might be needed if the current one is worn down or damaged. It is not uncommon for washers to become dented or otherwise damaged over time due to friction and normal wear and tear within the machine. Work gloves are recommended when working with small parts like washers. Be sure the engine is powered down before attempting to complete this job.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This lock washer is a genuine MTD part, sold individually. This lock washer can be used as a replacement part in lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers.The lock washer in a small engine outdoor appliance is a small component that can easily be lost or misplaced during the typical lifespan of the appliance. If this occurs, it should be replaced once the operator of the appliance notices its absence. The washer can also be stripped away as a result of general wear and tear, in which case it should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lock washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Husky, Broan, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.

This replacement part is a seat. It is a genuine replacement part made by MTD. This seat has a low back and is intended for use specifically for riding lawnmowers. This seat is able to support the user while they are operating the machine so that they are comfortable and upright during use.A new seat might be needed if the current one is damaged or missing. It is common for the seat to become worn down over time and lose support. If this is the case, the user might choose to replace it. It is also common that the seat becomes damaged such as being torn or ripped. This can cause the seat to not be as effective.This replacement seat is sold individually. This part is a genuine OEM replacement part sourced directly from the manufacturer.

This part is a replacement front axle assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current front axle assembly is defective or broken, this part can be used as a replacement. It is intended for use with a variety of lawn tractor models.The front axle assembly is critical as it is part of what attached the wheels to the lawn tractor and also enables proper maneuverability of the equipment. The user may struggle to maneuver the lawn tractor if this part is dented, bent, or broken in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this front axle assembly, the appropriate owner's manual and equipment diagrams should be referred to. This front axle assembly is suitable for use on a variety of lawn tractor models manufactured by MTD, Craftsman, Troy-Bilt, other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.