205C-2981-Pod-112 Parts

A replacement selector knob selection assembly that restores a secure, easy-to-turn control for cycle or setting selection. Replaces a cracked, loose, or missing knob so you can confidently select functions again. What it does:

• Replaces a worn, broken, or missing selector knob used to choose cycles or settings
• Provides a secure grip and positive engagement with the control shaft
• Helps stop slipping, wobbling, or a knob that won't turn properly
• Restores normal control operation when the original knob is damaged

• One selector knob selection assembly

• Disconnect power to the appliance before starting any repair
• Most knobs pull straight off the control shaft; align the splines and press on until fully seated
• If the knob resists, verify orientation—do not force to avoid shaft damage

This grille clip is a small plastic retainer that secures a refrigerator grille or trim piece to the cabinet, keeping the front panels aligned and preventing rattles or gaps for a tidy appearance. What it does:

• Secures the lower/front grille or trim to the appliance cabinet to hold it in place
• Prevents grille movement, rattling, or sagging that can occur with worn clips
• Helps maintain a tight fit between trim and cabinet for a finished look
• Simple replacement part when existing clip is cracked, broken, or missing

• One grille clip

• Typically snaps into place; inspect mating slot and clip orientation before installing
• Replace any damaged adjacent clips for even support and fit
• Work carefully to avoid damaging the grille or surrounding trim

This replacement refrigeration tube routes water between the dispenser/valve and internal components to restore reliable water flow and drainage. It's a simple, low-cost part that helps stop leaks and restore proper water delivery. What it does

• Channels water from the inlet valve to internal lines or dispenser components
• Replaces cracked, kinked, or clogged tubing that can cause leaks or reduced flow
• Helps stop visible drips under or inside the refrigerator when the original tube fails
• Works as a direct-fit service part when the OEM tube is damaged

• One replacement tube as shown

• Disconnect power and shut off the water supply before beginning any work
• Inspect fittings and clamps; replace any damaged fasteners to prevent leaks
• Route the tube following original path; avoid sharp bends and pinch points

This shelf channel mounting bracket secures the shelf channel to the appliance cabinet so shelves stay level and stable. It replaces a broken or worn mount to restore proper shelf alignment and support. What it does

• Secures the shelf channel to the cabinet frame so shelves sit flush and don't tilt.
• Prevents shelf movement or sagging caused by a loose or cracked mount.
• Helps maintain safe storage by keeping items from sliding off tilted shelves.
• Fits where the original channel mount has cracked, worn, or snapped.

• Designed for simple replacement—remove the shelf and channel to access the mounting bracket.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack plastic components.
• Disconnect power and remove stored items from the shelf area before beginning work.
• If mounting locations are damaged, assess surrounding supports; replace any additional broken hardware.

This replacement sleeve fits over a rotating shaft to reduce friction and protect the mating surface, helping restore smooth operation and reduce noise. Use when a worn sleeve causes rubbing or uneven movement. What it does:

• Acts as a bushing to prevent metal-to-metal contact on a rotating shaft
• Reduces friction and wear on the shaft and surrounding components
• Helps stop rubbing, scraping, or squeaking noises caused by a worn sleeve
• Restores proper alignment for smoother, quieter operation

• Disconnect power (and gas, if applicable) before starting any repair
• Use basic hand tools; no special training required for most installations
• Inspect the shaft and mating surfaces; replace if excessively scored or damaged
• If press-fit, install carefully to avoid damaging the new sleeve; do not use solvents as a substitute for proper fit

The Dispenser Drip Tray is an OEM part for Frigidaire refrigerators. It is located under the water and ice dispenser to catch any drips or spills that occur during use.

A bad dispenser drip tray can be caused by wear and tear, damage, or improper cleaning. When the drip tray becomes faulty, it can result in issues such as water or liquid pooling on the dispenser area or leaking onto the floor.

Symptoms of a bad dispenser drip tray include:

• Water or liquid pooling on the dispenser area
• Leaks or drips from the dispenser onto the floor
• Difficulty in removing or cleaning the tray due to damage

Replace your faulty dispenser drip tray with this genuine OEM Frigidaire part to restore your dispenser area. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This light assembly replaces the refrigerator interior lamp housing to restore interior illumination and safe bulb mounting. It provides a secure lens and socket assembly so the interior light functions correctly and stays protected. What it does:

• Houses and secures the interior lamp socket and lens for the refrigerator compartment
• Protects the bulb from contact with stored items and helps diffuse light for better visibility
• Restores proper lamp alignment and electrical connection when the old housing is cracked or broken
• Helps prevent loose bulbs and reduces risk of accidental bulb damage

• Disconnect power to the appliance before servicing to avoid electrical shock
• Use appropriate screwdriver or trim tool to remove the old housing; handle the lens carefully to avoid scratching or breaking
• Wear gloves and eye protection when handling bulbs or broken parts

This mullion assembly is the vertical door trim that covers the gap between refrigerator doors and provides a finished appearance while helping maintain a tighter seal. Replacing a cracked or warped mullion restores the look and reduces drafts. What it does

• Covers the vertical gap between doors and provides a finished trim piece.
• Helps maintain an improved door seal and reduces cold-air leakage around the door edge.
• Prevents visible damage or gaps that can allow moisture, frost, or odors into the cabinet.
• Restores proper door alignment appearance when the original mullion is dented, cracked, or warped.

• One mullion assembly.

• Disconnect power to the appliance before removing door panels or working near electrical components.
• Remove any door bins/trim as needed, then unfasten mounting screws or clips holding the mullion and lift out; reverse to install.
• Use care to avoid scratching door surfaces; gently align and seat clips/screws so the trim sits flush.

This replacement cover protects the refrigerator control panel and internal components while restoring a finished look. It keeps switches and wiring shielded from spills, dust and accidental contact for safe, reliable operation. What it does

• Covers and protects control panel area and related components
• Helps prevent moisture, food debris and accidental contact with switches or wiring
• Restores finished appearance when original cover is cracked, broken or missing
• Compatible with factory mounting points for a secure fit

• One replacement cover

• Disconnect power to the appliance before replacing any parts
• Remove any retaining screws or clips and gently lift old cover away from mounting points
• Align new cover with mounting tabs and secure with the original fasteners
• Inspect adjacent components for damage and replace as needed

This E ring is a small metal retaining clip that secures shafts, pulleys, and other rotating parts to prevent axial movement. It restores correct part positioning so assemblies run smoothly and stay aligned. What it does:

• Acts as a snap/retaining ring to hold components on a shaft or in a groove
• Prevents pulleys, bearings, or spacers from sliding out of place
• Common symptom: loose or shifting pulley, increased wobble, noise, or component disengagement
• Small, inexpensive part whose failure can allow adjacent parts to migrate and cause additional damage

• Disconnect power to the appliance before beginning any repair
• Use snap-ring pliers or needle-nose pliers and wear eye protection when installing or removing
• Ensure clip seats fully in the shaft groove and that mating surfaces are clean and undamaged
• Replace any damaged mating hardware rather than reusing a deformed clip

This replacement tube routes water inside the refrigerator to the ice maker or dispenser, restoring reliable water flow and helping prevent leaks. It's a direct-fit plumbing tube used where the factory line is damaged or worn. What it does

• Carries water from the internal water line to the ice maker or dispenser
• Helps stop leaks caused by cracked, kinked, or corroded tubing
• Restores normal filling when the ice maker or dispenser is not getting water
• Works as the OEM replacement part specified for the fridge's internal water routing

• Disconnect power and shut off the household water supply before starting.
• Inspect and clean connection fittings; replace clamps or seals if damaged.
• Use proper tubing cutters and avoid sharp bends or kinks when routing the tube.

A single replacement mounting screw used to secure trim, panels, or components on compatible Frigidaire appliances. Restores a lost or stripped fastener so panels and parts sit firmly and safely. What it does

• Secures trim pieces, control panels, brackets, or small appliance components
• Replaces missing or damaged screws that cause loose or rattling parts
• Helps restore proper alignment so doors and panels close and seal correctly
• Useful when reassembling after maintenance or part replacement

• Inspect matching hole and threads; replace with like-size screw to avoid damage
• Use correct screwdriver or driver bit to prevent stripping the head
• Do not overtighten; snug until secure
• Disconnect power to the appliance before accessing internal panels or components

This condenser tube spacer positions and secures the refrigerator's condenser tubing to maintain proper tube spacing and airflow. Replacing a worn or broken spacer helps reduce vibration, rattling, and rubbing that can damage tubing over time. What it does:

• Holds condenser tubing in the correct position to preserve airflow and cooling efficiency
• Cushions tubing to limit vibration and reduce rattling noises
• Prevents tubing from rubbing against the cabinet or other components, lowering wear risk
• Helps reduce the chance of tubing fatigue that can lead to damage

• Disconnect power to the appliance before accessing rear panels or condenser components.
• Handle condenser tubing gently; avoid kinking, bending, or putting stress on lines during installation.
• Installation may require removing the back or lower access panel to reach the condenser assembly.

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

The clutch drum in a chainsaw is responsible for helping to engage and stop the motor during operation. This assembly encases the clutch, and at a certain speed, it will engage the drum and activate the sprocket that drives the chain. This high-quality assembly is made of durable metal and sold as a single unit. The assembly can become worn over time and require replacement. If the chainsaw isn’t running as it should or the clutch isn’t engaging at the right point, the clutch drum assembly may be bad. This OEM clutch drum assembly is a genuine part that is manufactured by Husqvarna and designed for use in various Poulan, Husqvarna, and Jonsered chainsaws. This part is sold individually.

The Right Door Closer is an OEM part for Frigidaire refrigerators. It is responsible for ensuring that the refrigerator door closes securely and maintains a proper seal, keeping the cold air inside and your food fresh.

A bad right door closer can be caused by wear and tear, damage, or misalignment. When the closer becomes faulty, it can result in issues such as a loose or sagging door, difficulty in closing the door properly, or a compromised seal that leads to temperature fluctuations.

Symptoms of a bad right door closer include:

• Door not closing or sealing properly
• Condensation or frost buildup inside the refrigerator
• Noisy or squeaking door operation

Replace your faulty right door closer with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.