205C-2981-Pod-112 Parts

This replacement tube routes water inside the refrigerator to the dispenser or ice maker, helping restore proper water flow and prevent leaks. It's a direct-fit replacement when the original tube is cracked, pinched, or clogged. What it does

• Directs water from the inlet to the dispenser or ice maker so the system can deliver water and ice.
• Prevents leaks caused by damaged, split, or kinked tubing.
• Restores normal water flow when old tubing is clogged or collapsed.
• Works as an internal fluid pathway; not an electrical component.

• One replacement tube as shown.

• Turn off water supply and unplug the appliance before starting to avoid flooding and electrical shock.
• Inspect fittings and clamps during replacement; replace any damaged hardware for a secure seal.
• Route the tube along the original path and avoid sharp bends or kinks that can restrict flow.

This gasket seals the evaporator housing to help maintain proper airflow and refrigeration circuit integrity. It prevents air leaks that can cause frost buildup and reduced cooling performance. What it does:

• Seals the evaporator housing to keep cold air contained and airflow directed
• Helps prevent excessive frost accumulation on the evaporator
• Reduces the chance of warm air infiltration that leads to temperature problems
• Supports consistent cooling and proper defrosting operation

• One evaporator housing gasket

• Disconnect power to the appliance before beginning any work
• Remove evaporator cover and any ice buildup before replacing the gasket
• Clean mating surfaces and align the gasket carefully for a proper seal
• Inspect housing and mounting surfaces for damage; replace if cracked or warped

This refrigerator door gasket creates a tight seal around the door to help keep cold air in and reduce energy loss. Replacing a worn or torn gasket restores proper door sealing and helps the refrigerator maintain temperature. What it does:

• Seals the gap between the door and cabinet to prevent cold-air leaks
• Helps reduce frost build-up and limits warm-air infiltration
• Supports consistent internal temperatures for food safety
• Can resolve symptoms like condensation on the door, visible gaps, or excessive compressor run time

• Inspect the door frame and mating surface for debris or damage before installing
• Warm the gasket slightly to make it more flexible for fitting if needed
• Press the gasket evenly into the door channel and verify full seating around the perimeter

This replacement tube supplies water to the ice maker/dispenser assembly and restores a sealed, routed water path to prevent leaks and ensure proper filling. It's a direct-fit replacement when the original tube is cracked or damaged. What it does:

• Channels water from the inlet valve to the ice maker or dispenser fill point.
• Prevents leaks and drips caused by cracked, brittle, or pinched tubing.
• Helps restore normal ice production and dispenser flow when the original tube is compromised.
• Works with the refrigerator's existing fittings and clamps when installed correctly.

• One replacement tube.

• Disconnect power and shut off the water supply before starting any repairs.
• Replace only with the exact part number; inspect and reuse or replace clamps and seals as needed.
• Use basic hand tools; avoid kinking the tube during installation to maintain proper flow.
• After installation, restore water and power, then check carefully for leaks and proper fill operation.

This connector is a factory-style wire harness connector that secures electrical wiring and provides a reliable plug-in connection for appliance circuits. It helps restore proper electrical contact and prevents loose or intermittent connections. What it does:

• Joins wiring circuits with a keyed plug to ensure correct polarity and secure connection
• Restores power or signal continuity when an original plug is cracked, corroded, or loose
• Reduces arcing and intermittent operation caused by damaged connector ends
• Fits inline with existing harness locations to maintain OEM routing and function

• One replacement connector

• Always disconnect power at the breaker or unplug the appliance before starting
• Inspect adjoining wires and terminals; trim damaged insulation and use proper crimps if required
• Push connector fully onto mating plug until it latches; secure any retaining clips or harness ties
• If you see melting, heavy corrosion, or damaged wiring, replace the harness.

This small rubber door bumper cushions and aligns the refrigerator door to reduce slamming and wear. It restores smooth closing and helps keep the door sealed for proper cooling. What it does:

• Absorbs impact when the door closes to prevent hard bangs and protect cabinet surfaces
• Keeps the door properly spaced to help maintain a consistent seal
• Reduces rattling or vibration caused by loose or worn bumpers
• Simple, low-profile part used at door contact points or stops

• One replacement bumper

• Power is off if working near electrical components; follow appliance safety precautions
• Remove the old bumper by pulling it from its mounting hole; press the new bumper firmly into place until seated
• Use gloves to protect your hands; avoid using excessive force or tools that could damage trim
• Replace with the exact OEM part number for proper fit and function

This plastic guide positions and supports a moving component inside the appliance to keep parts aligned and running smoothly. Replacing a worn guide restores proper fit and helps reduce rubbing noises and uneven movement. What it does:

• Holds and aligns a moving part or trim so it tracks correctly during operation
• Prevents rubbing, scraping, or binding that can cause noise or premature wear
• Maintains correct spacing to protect adjacent components from damage
• Commonly replaced when you see misalignment, clicking, or intermittent contact

• One plastic guide as shown

• Disconnect power (and water, if applicable) before attempting any repair
• Access may require removing panels or trim; keep fasteners organized
• Inspect adjacent parts for wear and replace if needed to prevent repeat failure

This user interface is the front control panel assembly that provides the touch buttons and display used to select oven/range functions and show time and temperature. Replacing a faulty interface restores responsive controls and readable display. What it does:

• Registers touch/button inputs so the appliance responds to temperature, timer and function selections
• Shows oven temperature, clock and status messages on the display
• Stops common symptoms like unresponsive buttons, blank or flickering display, or missing function feedback
• Works with the existing control electronics and ribbon/connectors to transmit commands

• Disconnect power to the appliance before starting any work.
• Handle the display and ribbon cable carefully to avoid damage.
• Test the interface and functions after reconnecting power before fully reassembling.