205C-2981-Pod-112 Parts

This is a genuine replacement high speed chainsaw needle. The chainsaw needle bearing is designed to hold the sprocket in place and provide its smooth operation as it rotates around the crankshaft of the engine. The needle itself and the bearings can become dull or worn over time due to the repetitive motion and constant vibrations. If this part becomes damaged, the chainsaw will not be able to operate correctly. In some instances, the needle and bearing will wear out because they are not well-lubricated enough. This can lead to unnecessary damage and early repairs, but at some point it will require a full replacement. This genuine OEM needle for high-speed chainsaws will provide an exact fit for compatible models. It is manufactured by Husqvarna and can be used on select models of chainsaws from the brand, as well as those from Craftsman. This part is sold individually and does not include any additional hardware or components. It should be installed only when the unit is cooled and the power has been disconnected from the chainsaw for safety. It's also important to wear gloves and use the right tools, including a wrench, screwdriver, and socket set, to replace this part.

The Poulan assembly bar plate is used in Poulan chainsaws. It sits against the saw's housing and acts as a guard to strengthen the mounting of the bar on the saw. Without a properly functioning bar plate, the plastic that houses the saw will likely be damaged. The bar plate also helps to keep the guide bar lubricated with bar oil, which aids in cutting accuracy. If the bar and chain on the chainsaw are worn through prolonged use, the chain will rub against the bar plate and cause a hole in the metal.The Poulan assembly bar plate is made of durable metal that will last a long time and can be installed with a screwdriver. To install the new bar plate, remove the clutch cover on the chainsaw, and remove the bar and chain assembly. Then replace the bar plate with the new replacement, and put the chainsaw back together. Always make sure to re-tension the chain of the chainsaw after the repair is done.This bar plate is a genuine OEM replacement that is compatible with Poulan assembly chainsaws. It is sold individually.

Carburetors mix fuel with air to ensure the engine gets just the right amount of combustion. It works when idling and when in operation, and a chainsaw carburetor requires an adapter. This reduces vibration to the carb and isolates heat to help keep the carburetor cool. This carb adapter kit will connect the carburetor to the cylinder and uses a gasket on either side that can fail and require replacement. Because plastic can be used for a carb adapter, it can crack and lead to failure. This OEM carb adapter kit is meant for Craftsman, Poulan and Husqvarna chainsaws, and will work in many different models. Replacing it will require the use of a wrench set, socket set, pliers, and screwdriver. As noted, gaskets may also be needed, but this part is sold individually and includes only the chainsaw carb adapter.

Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.

This replacement divider is the plastic partition that separates sections on a refrigerator shelf or in a deli/drawer, helping keep food organized and preventing items from sliding together. Easy to swap when cracked or missing. What it does:

• Re-creates the original partition between shelf sections or deli drawer areas
• Keeps items separated for better organization and airflow
• Prevents small items from rolling or shifting during door movement
• Fixes symptoms like broken, cracked, warped, or missing divider pieces

• Disconnect power to the appliance or unplug before starting any repair.
• Remove the shelf or drawer per your model's service instructions to access the divider.
• Handle carefully to avoid cracking during removal or installation.

This replacement door bin restores lost or broken storage on the refrigerator door so bottles, condiments and small containers snap back into place. Durable molded plastic keeps items secure and organized. What it does:

• Provides a stable shelf inside the refrigerator door for bottles, jars and small items
• Replaces cracked, chipped or missing door storage that no longer holds items securely
• Restores proper fit and alignment with existing door rails and brackets
• Helps prevent spills and shifting of stored items during door opening and closing

• Remove items from the door and lift or unhook the old bin from the door rails before installing
• Align the bin with the door rails and press firmly until it snaps into place; verify it is seated evenly
• Do not force the bin past resistance; inspect rails and brackets for damage before installing
• For safety, avoid working on powered components and keep hands clear of pinch points

This chain brake assembly is a genuine Husqvarna part, sold individually. This chain brake assembly can be used as a replacement part in a chainsaw. The purpose of the chain brake assembly in a chainsaw is to allow the operator to stop the chain from rotating around the belt.The chain brake assembly in a chainsaw might need to be completely replaced if the chain brake assembly suffers damage that cannot be mended by a basic repair. This damage could come in the form of puncturing, denting, cracking, chipping, scraping, eroding, or warping. If this occurs, the chain brake assembly should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This chain brake assembly is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This is a durable metal valve tappet that is designed for use in small motor lawn equipment. It is attached to the push rod. The valve tappet takes the rotating motion from the camshaft and turns it into a linear motion for the valves to operate correctly. In some cases, the valve tappet can become damaged or break and will need to be replaced.If there is an issue with the valve tappet, a set of pliers will be needed to make the replacement. For safety, use work gloves and make sure the spark plug wire is disconnected before starting the replacement. The crankcase breather, muffler, and other components will need to be taken off to gain access to the valve tappet to replace it.This valve tappet is a genuine OEM replacement component directly sourced from the manufacturer. It is sold as an individual replacement part. It is designed to be used on lawnmowers, snowblowers, tillers, pressure washers, leaf blowers, generators, and chipper shredders manufactured by Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

This is a replacement screw to secure the pawl friction plate used in many types of lawn and garden equipment. The part is also sometimes called a flange bolt. It is identical to the original screw that came with the machine and will replace a lost or damaged screw. The screws could become damaged due to corrosion or an incident that causes the screw to bend or break. They also serve as replacements in case the screw was lost. Replacing the screw is a simple repair to make. This is an authentic OEM replacement screw that is sold individually. Some buyers might want to have an extra screw on hand. The replacement screw for the pawl friction plate can be used on lawn mowers, snowblowers, tillers, pressure washers, generators, edgers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.

O-rings are used in various locations and applications to seal and protect connections throughout the engine. The O-ring is typically used for rigid connections where a proper seal is required for optimal functioning. It is critical to have the right size and style of O-ring installed for proper operation. These parts tend to wear over time and that can affect their ability to seal. If O-rings are degraded or damaged in any way, they need to be replaced as soon as possible to prevent further damage. This O-ring is manufactured to exact specifications by Briggs & Stratton to provide a genuine OEM replacement. It can be used in various Toro, Briggs & Stratton, and Lawn-Boy engines. Typically found in lawn tractor engines, this part is compatible with more than 150 machines. This O-ring is made from durable materials and sold individually. Always disconnect the spark plug before beginning engine work and wear gloves for hand protection.

The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.

This genuine replacement retainer E-clip is intended for use with lawn mowers, snowblowers, pressure washers, and more. It gets its name from the shape of the letter “E”, and has one side open, allowing it to have a larger retaining area and higher thrust capacity. Depending on the piece of equipment they are installed in, these retaining clips hold bearings, gears, pulleys, and other moving parts which have grooves in them. They are made of heat-treated steel which allows it hold strong through many uses, but it may eventually begin to wear out or break with extended use.This retainer ring E-clip is compatible with several equipment brands which use Briggs and Stratton engines This is a genuine OEM replacement part and is sold individually.