215Lash Parts

This ball bearing assembly has a wide variety of uses in a number of gasoline-powered yard tools. Bearings are used to provide smooth, friction-free motion between the rotating parts of equipment where pieces fit together and move. The weight and momentum of the rotating motion are distributed to the ball bearings, which prevents wear on the equipment and allows smooth, repetitive motion. Ball bearings are used in equipment such as tillers and lawn tractors, as well as other power equipment that is self-propelled. The bearings will wear out over time since they are on the receiving end of all the angular momentum of the equipment being used. One of the chief locations where bearing assemblies need to be replaced are the drive wheels of the riding mowers and lawn tractors. The bearings are located in brass housings specifically machined to hold them. Since it can be difficult to remove the old ball bearing assemblies from these housings, it is worth considering simply replacing the entire housing as well as the bearing. These bearings are genuine OEM manufactured replacement parts. They are compatible with MTD, Yard-Man, Troy-Bilt, Husky, Cub Cadet, and Yard Machine lawn tools.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

This part is a replacement drive control cable. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken drive control cable in a variety of tiller models. The drive control cable is what allows the tiller to be driven as it engages the transmission and propels the equipment forward. At the same time, it helps to rotate the tiller's tines. Thus, this part is critical and will require replacement if rendered ineffective in any way. When working on or near an engine, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this drive control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this drive control cable is suitable for use on tillers manufactured by MTD, Craftsman, Troy-Bilt and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This clutch cable is a genuine MTD part, sold individually. This clutch cable can be used as a replacement part in a tiller. The clutch cable can be engaged and disengaged in order to facilitate the linear motion of the appliance.If the clutch cable has been torn, scraped, ripped, dented, punctured, eroded, warped, or otherwise damaged, the clutch cable should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions from a relevant appliance manual.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This clutch cable is compatible with the following outdoor appliance brands: MTD, Yard Machines, and Husky.

This part is a replacement spacer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or worn-out spacer in a variety of tiller models. Spacers help to ensure that there isn't excessive heat, friction, or vibration caused by moving components within the tiller. They are particularly subject to wear and tear over time or with regular usage, and thus may need to be replaced with a genuine OEM part. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this spacer, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this spacer is suitable for use on tillers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This is a V-belt that is used on several types of tillers from top manufacturers. It's responsible for making sure the tiller tines rotate within the tiller. The belt is made from durable rubber but over time, it can stretch out, break, or wear out. The more the tiller is used, the more likely it is that the V-belt will need replacement. Sometimes mechanical issues can also cause the belt to wear out more quickly than expected. If the belt is overly worn, it can cause the tiller to operate inefficiently since the belt can slide off the pulley. With a V-belt that is broken, the tool will no longer operate until it has been replaced. This V-belt is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is made to be used with tillers manufactured by Yard-Man, Craftsman, Troy-Bilt, Huskee, Montgomery Wards, Bolens, MasterCut, MTD, Yard Machines, and Cub Cadet.

This is a hex head bolt 1/4 - 28 x .625. It is used to secure a device together for smooth and simple operations. With use and over time, the hex head bolt may be damaged or come loose and fall out. When the bolt is missing, the machine could fall apart or otherwise malfunction. Be sure to replace a missing or damaged hex head bolt.Allow the equipment to cool completely before starting the repair process. An Allen key or hex key will be required to loosen and remove any old or damaged bolts. The new bolt can then be inserted and secured tightly. Examine for other missing parts before starting the device.The hex head bolt 1/4 - 28 x .625 is an authentic OEM part. It is sold as an individual unit. It is made of rugged, durable, high-quality materials. The hex head bolt can be used in lawn equipment machines, including various models of tillers. It is compatible with MTD, Yard Machines, Yard-Man, Troy-Bilt, and Cub Cadet brands.