22-13742 Parts

The Lower Door Seal is an OEM replacement part for Whirlpool dishwashers. This seal runs along the bottom edge of the dishwasher door, creating a tight seal against the tub when closed to contain water inside during cycles.  This seal measures approximately 22 inches in length

Causes of lower door seal failure commonly involve repeated compression stresses from opening/closing actions gradually stiffening the flexible gasket material. Drying out and cracking occurs over years of heat exposure as well.

Symptoms of a worn lower door seal include:

• Water leaking out from beneath dishwasher door during cycles
• Difficulty latching door completely from warped seal edges  
• Visible cracks, splits or brittleness along the length of the seal
• Gaps allowing water intrusion beneath door perimeter

This versatile OEM part is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore dishwasher models.

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.

Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.  

Symptoms of a bad Diverter Motor include:

• Dishes not being cleaned properly due to insufficient water reaching all areas.
• Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
• Error codes displayed on the dishwasher that are related to water distribution functions.
• Leakage from the dishwasher base 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement handle restores a secure, comfortable grip so you can open and close your appliance smoothly. It replaces a cracked, broken, or loose handle to bring back reliable operation and a clean, factory look.

• Provides sturdy leverage to open and close the unit's door or drawer
• Attaches to existing mounting posts or screws on compatible models
• Helps resolve issues like a loose, wobbly, cracked, or missing handle
• Restores appearance when the original handle is scuffed or damaged

• Disconnect power before servicing; also shut off water
• Protect the surface with tape or a cloth to avoid scratches during removal/installation
• Align the handle carefully; start fasteners by hand to prevent cross-threading
• Tighten evenly and only until snug to avoid damage to threads or trim

This box cover protects and conceals the appliance's electrical junction box, keeping wiring secure and reducing exposure to dirt and moisture. It restores a finished appearance and helps maintain safe electrical connections. What it does

• Shields the junction box and wiring from dust and debris
• Helps prevent accidental contact with live terminals
• Maintains the appliance's original fit and finish around electrical components
• Commonly replaced when the cover is cracked, missing, or damaged

• One box cover

• Disconnect power to the appliance before installing to avoid electrical shock
• Handle carefully to avoid damaging tabs or screw bosses used for mounting
• Use the OEM screws or fasteners; replace missing hardware with manufacturer-recommended parts

This control panel is the user-facing interface that houses the appliance's buttons and display so you can select cycles and monitor status. It restores a worn or damaged console for normal operation and clear feedback. What it does:

• Provides the front-mounted buttons and display used to select cycles and options
• Transmits user selections to the appliance's main control for proper operation
• Replaces faded, cracked, or unresponsive panels that make controls hard to read or press
• Helps restore a secure mounting surface for switches and indicators

• One replacement control panel

• Disconnect power (and water, if applicable) before beginning any repair to avoid shock or injury
• This panel typically mounts to the console with screws or clips; remove trim to access mounting hardware
• Handle with care to avoid damaging button surfaces or display lens during installation

This deflector is a replacement airflow guide that helps direct air inside the appliance for more consistent performance and even drying/heating. It replaces a cracked or warped deflector to restore proper circulation. What it does:

• Guides internal air flow to prevent hot/cold spots and improve cycle performance
• Helps keep air moving over the drum/heating area for more consistent drying or heating
• Replaces damaged, cracked or warped deflectors that can disrupt airflow
• Can reduce unusual noises caused by loose or broken airflow parts

• Disconnect power (unplug or shut off breaker) before beginning any service
• Remove only the panels required to access the deflector; retain all fasteners for reassembly
• Inspect mounting tabs and surrounding components and replace any broken clips or screws

A general-purpose replacement screw used to secure panels, trim or components on compatible Whirlpool appliances. This genuine-style fastener restores proper assembly and prevents loose or rattling parts for a safe, reliable fit. What it does

• Secures control panels, trim pieces, brackets or internal components to hold assemblies in place
• Restores lost or stripped fasteners that cause loose panels or vibration noise
• Helps maintain alignment of connected parts for correct operation and a finished appearance
• Compatible with applications that require the OEM W11232015 screw specification

• One replacement screw

• Use correct driver bit and gentle torque to avoid stripping the head or threads
• Replace only when the original fastener is missing or damaged; confirm length/thread before installation
• Disconnect power and follow appliance safety procedures when accessing internal components

Color: White

This spacer fits between tank components to maintain proper spacing and alignment, helping reduce vibration and wear. Use this genuine replacement to restore correct clearances and improve stability in the appliance's tank assembly. What it does:

• Positions and separates tank parts to maintain correct alignment during operation
• Helps reduce noise and vibration caused by misaligned components
• Prevents metal-to-metal contact that can cause premature wear or damage
• Restores factory clearances after service or replacement of tank parts

• One spacer

• Designed for direct replacement; use the OEM mounting location and orientation
• Disconnect power and water (if applicable) before beginning repair
• If fasteners or surrounding components are worn or damaged, replace them to ensure a secure fit

This replacement lower dishrack restores the main loading surface in your dishwasher so dishes sit securely and spray reaches them for better cleaning. It replaces a cracked, rusted, or misshapen rack to help protect dishes and keep loading organized. What it does

• Provides a stable platform to hold plates, bowls and cookware during wash cycles
• Maintains correct spacing so spray arms can reach all items for effective cleaning
• Replaces bent or rusted rack wires that can snag or chip dishes
• Helps keep utensil baskets and rollers aligned for smooth rack movement

• One lower dishrack

• Remove dishwasher racks and disconnect water/electric only if required by your model; most rack swaps are simple hand installs
• Inspect and transfer any rollers, clips, or utensil baskets from the old rack to the new one if needed
• Handle carefully to avoid wire ends that may be sharp; wear gloves if helpful
• If rails or rollers are damaged, replace those parts as well for proper rack operation

This replacement silverware basket sits in the dishwasher rack and keeps forks, knives, and spoons upright and contained so they wash thoroughly and don't slip through the rack or interfere with spray-arm movement. What it does:

• Holds and organizes flatware during wash and rinse cycles
• Helps separate utensils for better spray coverage and drainage
• Replaces cracked, warped, or missing baskets

• 1 silverware basket

• Open the dishwasher and pull out the lower rack for access
• Lift out the old basket and place the new basket in the same location/orientation
• Ensure the basket seats securely and does not contact the lower spray arm
• Manually spin the spray arm to confirm clearance before running a cycle

The Thermostat Housing is an OEM part for Whirlpool dishwashers. It encases the thermostat responsible for accurately monitoring water temperatures throughout cleaning cycles. 

Symptoms of a faulty housing include:

• Inconsistent or improper water heating  
• Delayed or incomplete cycles from temperature control issues
• Error codes or failure detection by the control board

Causes may involve cracks allowing steam penetration, loose mounting points compromising seals, or damaged seals leaking interior thermostat components. 

This OEM replacement fits Whirlpool, KitchenAid, Jenn-Air, and some Kenmore models as well.

This manifold is the main gas distribution assembly for the range's burner system, replacing a worn or damaged manifold to restore proper fuel flow and consistent burner operation. What it does:

• Distributes gas from the range valve to individual burners for even flame delivery
• Ensures each burner receives correct gas flow for reliable ignition and operation
• Can resolve symptoms such as burners failing to light, weak or uneven flames, or intermittent burner operation
• Works with the range's valve and burner orifice components as part of the fuel delivery system

• Turn off gas supply and electricity to the appliance before starting any repair
• Inspect all fittings and seals; tighten connections and test for leaks after installation using a soapy-water solution or a gas leak detector
• Basic hand tools are typically required; follow OEM instructions for torque and gasket placement

This replacement refrigerator door handle restores a secure, comfortable grip and the appliance's finished appearance. Designed to match the OEM fit for compatible Whirlpool refrigerators, it replaces a cracked or worn handle quickly. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces broken, cracked, or damaged handles that affect use or appearance
• Aligns with factory mounting points for a proper fit
• Helps restore the appliance's original look and functionality

• Disconnect power to the appliance or unplug the refrigerator before beginning work.
• Most installations require a screwdriver; keep original screws and trim unless new fasteners are included.
• Support the door while removing and installing the handle to avoid damage.