253704134415 Parts

Replace a broken or missing refrigerator drawer handle to restore a secure grip and smooth, everyday access to the drawer. This direct-replacement handle attaches to the drawer front and returns normal function and clean appearance.

• Provides the handhold for opening and closing the refrigerator drawer
• Secures to the drawer front to support normal use
• Typical failures: cracked plastic, broken mounting tabs, stripped screw bosses
• Symptoms: handle loose, cracked, or missing; drawer hard to pull due to lack of grip

• Unplug the refrigerator or disconnect power before servicing
• Empty and remove the drawer to access handle fasteners or clips
• Transfer and reuse any existing screws/trim from the original handle; align and secure the new handle
• Reinstall the drawer and test operation; avoid overtightening fasteners into plastic

Keep your fridge sealing tightly with this replacement door gasket. It restores the refrigerator door seal to help maintain proper cooling, reduce energy use, and limit moisture and frost buildup for consistent food storage. What it does:

• Seals the refrigerator door to prevent cold air leakage and maintain set temperature
• Helps reduce frost buildup and condensation inside the fresh-food compartment
• Lowers strain on the compressor caused by escaping cold air
• Commonly replaced when you notice warm spots, persistent moisture, visible gaps, or a door that won't seat properly

• Disconnect power and remove food from the door area before replacing the gasket
• Inspect the gasket mounting channel for debris or damage and clean before installing
• Avoid sharp tools that could tear the gasket during removal or installation
• After installing, allow the gasket to form and check the door seal; door may need to be closed slowly for final seating

This lower basket kit replaces a damaged lower dish rack to support plates, bowls and cookware in the dishwasher and restore proper loading and cleaning. It provides a stable, organized lower rack for everyday dishwashing. What it does

• Holds and separates dishes, bowls and cookware in the dishwasher's lower cavity for thorough washing.
• Restores proper rack alignment and stability when tines are bent or sections are damaged.
• Replaces worn or missing lower rack components that cause noisy rolling or improper drainage.
• Helps prevent dishes from contacting the spray arm or each other during wash cycles.

• One lower basket kit.

• Remove power and empty the dishwasher before replacing the rack.
• Slide out the old lower rack and set the new kit into the lower track; wheels/tines typically snap into place.
• Inspect for sharp edges or rust; replace the kit if structural corrosion is present.

A replacement door air filter trim that secures and covers the refrigerator's air filter assembly, keeping the filter in place and maintaining a finished interior appearance. Restores proper fit and helps the filter seal correctly. What it does:

• Secures the air filter cartridge inside the refrigerator door so it stays properly positioned.
• Helps maintain an even airflow path through the filter for odor control and air circulation.
• Replaces cracked, warped, or missing trim that creates gaps or prevents the filter from seating.
• Improves the door interior finish by covering the filter opening.

• Disconnect power to the appliance before starting service to avoid electrical risk.
• Remove food and door bins as needed for access; handle parts gently to avoid damage.
• Trim typically snaps or screws into place—retain any original fasteners if present.
• Inspect related components and replace as necessary.

This OEM-style refrigerator shelf divider keeps items separated and organized so groceries stay in place and drawers/shelves stack neatly. It replaces a cracked, warped, or missing divider to restore proper storage separation. What it does:

• Separates food and containers to prevent shifting and contact between items
• Restores intended shelf/drawer organization and usable space
• Helps keep contents from sliding when doors open or close
• Useful when the original divider is cracked, broken, or missing

• One replacement divider

• High-level replacement: remove the shelf or drawer as needed, align the divider in its mounting slots, and press into place
• Use caution handling glass shelves or sharp edges; wear gloves to protect hands
• Check fit and alignment before returning contents to avoid interference with door or drawer movement
• If mounting clips or tracks are damaged, replace those parts rather than forcing the divider

This replacement ice container catches and stores cubed ice from the refrigerator's icemaker, keeping ice accessible and organized in the freezer. It restores proper ice pickup and reduces spills from loose ice. What it does:

• Holds and stores made ice from the icemaker so you can reach and dispense cubes easily
• Guides ice from the icemaker into a single bin to prevent jamming or scatter
• Helps maintain proper ice pickup by the dispenser/auger (when applicable)
• Commonly used when the original bin is cracked, warped, or missing

• One ice container

• Disconnect power to the appliance before removing or installing the ice container
• Slide out the old bin straight from the freezer compartment or remove any retention clips as needed
• Inspect surrounding components for damage before reinstalling
• Handle with care to avoid cracks; no special tools typically required

This wire freezer basket provides a removable storage bin for organizing frozen foods and maximizing usable freezer space. It replaces a broken, missing or warped basket so items stay contained and accessible. What it does:

• Holds and organizes frozen food items to prevent clutter and make retrieval easier
• Slides or lifts out for convenient loading, unloading and cleaning
• Stops items from falling into lower compartments or vents
• Restores secure storage when original basket is cracked, bent or missing

• One wire freezer basket

• Typically installs without tools—lift into place on freezer rails or hooks;
• Handle edges carefully to avoid pinches; wear gloves if needed
• Verify fit and orientation before loading heavy items
• If freezer shelves or rails are damaged, replace them first to ensure proper basket support

This evaporator block is the refrigerator evaporator coil assembly that removes heat from the freezer/refrigerator compartment to help maintain proper cooling and reduce frost buildup. What it does:

• Circulates refrigerant through the evaporator to absorb heat from the compartment
• Promotes cold airflow across the freezer and fresh-food sections when paired with the evaporator fan
• Helps control frost and ice buildup on the evaporator surface
• Common symptoms: reduced cooling, excessive frost or ice buildup, or warm freezer temperatures

• Always disconnect power to the appliance before servicing
• Replacing the evaporator typically requires accessing sealed refrigerant areas;
• Allow components to fully defrost and drain before removal to avoid water damage
• Handle the coil gently to avoid bending fins or damaging tubing

This molded plastic air deflector directs cold airflow inside the refrigerator/freezer to help maintain even temperatures and proper compartment circulation. It replaces broken or missing airflow guides to restore proper venting. What it does:

• Guides and directs cold air from the evaporator into the refrigerator/freezer compartments
• Helps reduce hot spots and uneven cooling when functioning correctly
• Commonly replaced if cracked, warped, or broken mounting tabs block airflow
• Can resolve symptoms like inconsistent temperatures, poor cooling in one compartment, or visible airflow leaks

• One air deflector

• Unplug the appliance before beginning any repair to avoid shock or injury
• Remove shelves or drawers as needed to access the deflector; handle plastic tabs gently to avoid breakage
• Install by aligning mounting tabs/clips and snapping or securing into place; do not force
• After installation, restore power and verify airflow and temperature performance

This sump is the dishwasher drain pump housing that channels wash and drain water to the pump, helping the appliance clear water quickly to prevent standing water. A direct-fit replacement when the original housing is cracked or leaking. What it does:

• Houses and seals the drain pump to direct wastewater out of the tub
• Prevents leaks by maintaining a secure pump-to-tub connection
• Helps maintain proper drain flow to avoid standing water or incomplete drains
• Commonly replaced for visible cracks, leaks under the appliance, or when the pump seal fails

• One sump (drain pump housing) as shown

• Disconnect power and water supply before starting any repair
• Inspect adjoining gaskets, clamps, and pump for wear; replace if damaged
• Handle plastic components carefully to avoid cracking; tighten fasteners to OEM specs