253704134415 Parts

This retainer is a small mounting clip that secures internal components and trim to keep panels and assemblies aligned during normal use. It restores secure fitment and reduces movement or rattling from loose parts. What it does:

• Holds panels, trim, or small assemblies in place to prevent shifting and vibration
• Helps stop rattling or buzzing caused by loose internal components
• Keeps parts aligned so doors, drawers, or panels operate smoothly
• Replaces cracked, broken, or worn clips that no longer grip reliably

• Disconnect power to the appliance before inspecting or replacing parts
• Remove surrounding panels or trim as needed to access the retainer; keep screws/fasteners for reassembly
• Snap the clip into the mating slot or tab until it seats; replace any damaged mounting points
• Replace all adjacent clips for consistent fit

The Motor Mount Bushing is an essential OEM component inside Frigidaire bottom-mount refrigerators. It secures the evaporator fan motor securely while cushioning vibrations transmitted to the refrigerator body.  

Causes of failure include natural wear of plastic glide surfaces from prolonged absorption of mechanical stresses during compressor and fan operation cycles. Deformations compromise uniform motor positioning over time.

Symptoms of a worn motor mount bushing include:

• Rattling noises emanating from the refrigerator fan area
• Reduced air circulation leading to warmer interior temperatures 
• Lubricant leaks at the mounting point requiring replacement

This authentic OEM replacement is compatible with Frigidaire, Electrolux and select Kenmore models.

The Slide Assembly is an essential OEM component for Frigidaire refrigerator drawers. It provides smooth extension and retraction of covered storage bins during access.  

Symptoms of a faulty slide assembly include:

• Squeaking or rubbing noises coming from drawer rails   
• Difficulty smoothly pulling out covered bins
• Scratches or gouges visible along wear surfaces

Causes involve years of constant sliding stresses overwhelming lubrication, leading to increased friction. Without smooth gliding, premature deterioration of plastic drawer supports results.

This authentic OEM replacement is compatible with Frigidaire, Electrolux, and Kenmore models.

This drawer roller allows your refrigerator's bin or crisper drawer to glide smoothly along its track. Replacing a worn or missing roller helps restore easy opening and closing and prevents drawers from sticking or binding.

• Supports the drawer as it slides on the rail/track
• Helps correct stiff, rough, or noisy drawer movement
• Can reduce uneven sliding or a drawer that pops off the track
• Common wear item when drawers are overloaded or used heavily

• Unplug the refrigerator before servicing
• Remove the affected drawer to access the roller
• Note roller orientation and reuse existing fasteners if applicable
• Test drawer travel after replacement to ensure smooth operation

This evap coil cover protects the evaporator and helps direct airflow for more consistent cooling. It replaces damaged or missing covers to reduce frost buildup, keep debris away from the coil, and help prevent interior leaks. What it does:

• Shields the evaporator coil from ice, debris and accidental contact to protect coil fins.
• Helps channel airflow across the coil for improved cooling performance.
• Can reduce frost accumulation and related moisture or dripping symptoms.
• When cracked or missing, you may notice increased frost, water in the cabinet, or reduced cooling.

• Always disconnect power to the appliance before servicing.
• Remove interior liners or access panels to reach the evaporator; handle coil fins and insulation carefully.
• Reinstall any mounting clips, grommets, or insulation exactly as removed to maintain fit and sealing.

This bushing provides a durable, low-friction bearing surface between moving parts in your appliance. It helps components pivot or rotate smoothly, reducing noise and wear so doors, drawers, and mechanisms operate as intended.

• Provides a sleeve/bearing surface between a pin or shaft and its housing
• Maintains alignment to prevent wobble and binding
• Reduces friction, squeaks, scraping, and premature wear
• When worn or missing, movement may feel rough, loose, or noisy

• Disconnect power before servicing
• Support the assembly being serviced before removing fasteners
• Note the orientation of the original bushing; seat the new bushing fully without forcing
• Reassemble and check for smooth, rub-free movement before restoring power

This support beam is a structural cabinet brace that stabilizes the refrigerator's interior frame and restores proper alignment of doors, drawers and shelves, helping reduce sagging, vibration and unusual noises. What it does:

• Reinforces the cabinet/frame so internal components stay square and aligned
• Helps prevent doors and drawers from sagging or binding
• Reduces rattling or vibration caused by a bent or missing brace
• Common symptom indicators: visible bend or gap, uneven door fit, or persistent noise from the cabinet area

• Disconnect power and remove food/contents from the affected area before starting any repair
• Basic hand tools typically required; follow the manufacturer's service manual for correct fastener torque and placement
• Handle carefully to avoid scratching the finish; inspect surrounding mounting points and replace damaged fasteners as needed

This rivet is a metal fastener used to permanently secure panels, brackets, or internal components in your appliance. Replacing a damaged or missing rivet restores a tight fit and helps prevent vibration, rattles, and looseness.

• Permanently joins thin metal parts where screws or nuts aren't used
• Maintains alignment and structural integrity of housings and frames
• Helpful when panels or components are loose, rattling, or won't stay secured
• Direct replacement for a worn, broken, corroded, or drilled-out factory rivet

• Disconnect power and shut off gas/water (as applicable) before servicing
• Support the part being fastened; drill out the old rivet head if needed
• A hand riveter/rivet tool may be required to set the new rivet
• Wear eye and hand protection during drilling/riveting

The Hinge Assembly is an OEM replacement part for Frigidaire refrigerators. It is the mechanism that allows the refrigerator doors to open and close properly. The hinge assembly consists of metal brackets, pins, and bushings that connect each door to the fridge cabinet and facilitate smooth swinging movement. 

Causes of a bad hinge assembly can include wear from years of operation, excessive weight on door racks damaging components, or damage if the refrigerator is moved improperly.  

Symptoms of a bad hinge assembly include:

• Doors that do not close or align securely  
• Gaps that compromise the refrigerator seal 
• Noisy or rough door movement
• Doors difficult to open, especially when full or heavy

As a major moving component, hinges can degrade over time. Replace with this genuine OEM part to restore proper door function for Frigidaire refrigerators. It fits models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

This air tower is the plastic duct that routes cold air from the evaporator through the freezer and fresh-food compartments to maintain even cooling. Replaces a cracked or damaged duct to restore proper airflow and temperature balance. What it does:

• Channels cold air from the evaporator coil into the appliance compartments to help maintain consistent temperatures
• Prevents air leakage and uneven cooling when the original duct is cracked or broken
• Helps reduce frost buildup by directing airflow over the evaporator area
• Can resolve symptoms like warm spots in the fridge or freezer, poor cooling after a bump, or visible cracks in the duct

• One air tower/evaporator air duct

• Designed to install in the evaporator/air distribution area; follow OEM instructions for proper alignment
• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle plastic shrouds carefully to avoid breaking mounting tabs; replace any damaged fasteners
• Defrost and dry the area before installing the new air tower

The Hinge Assembly is an OEM replacement part for Frigidaire refrigerators. It is the mechanism that allows the refrigerator doors to open and close properly. The hinge assembly consists of metal brackets, pins, and bushings that connect each door to the fridge cabinet and facilitate smooth swinging movement. 

Causes of a bad hinge assembly can include wear from years of operation, excessive weight on door racks damaging components, or damage if the refrigerator is moved improperly.  

Symptoms of a bad hinge assembly include:

• Doors that do not close or align securely  
• Gaps that compromise the refrigerator seal 
• Noisy or rough door movement
• Doors difficult to open, especially when full or heavy

As a major moving component, hinges can degrade over time. Replace with this genuine OEM part to restore proper door function for Frigidaire refrigerators. It fits models also compatible with Electrolux, Gibson, Kelvinator, and Kenmore designs.

This slide assembly replaces a worn or damaged drawer glide to restore smooth, stable drawer movement and proper alignment. It helps drawers open and close without sticking or falling out. What it does:

• Guides and supports a refrigerator or freezer drawer for smooth sliding action
• Prevents drawers from binding, sagging, or coming off the track
• Reduces noise and uneven movement caused by a damaged glide
• Restores proper drawer alignment for secure storage

• Unplug the appliance or disconnect power before starting any repair
• Empty the drawer and remove it according to the appliance's service instructions
• Retain and reuse any factory screws or clips unless replacements are specified
• Install orientation must match the original part; test drawer movement before returning contents

This small rubber bumper cushions the refrigerator/freezer door to reduce noise and prevent metal-on-metal contact. It helps doors close quietly and protects cabinet finish from repeated impacts. What it does:

• Acts as a soft stop between the door and cabinet/frame to absorb impact
• Reduces rattling and slamming for quieter operation
• Prevents wear and chipping where the door contacts the cabinet
• Restores proper door alignment when missing or worn

• One replacement bumper

• Push the bumper into the existing hole or slot on the door/frame until fully seated
• Inspect surrounding area for damage; replace mounting clips or retainers if required
• Wear gloves to protect hands from sharp edges during installation
• No special tools usually required; for detailed instructions

This replacement door gasket seals the freezer compartment to help keep cold air in and warm air out, improving temperature stability and energy efficiency. It restores a tight seal for effective cooling and frost control. What it does:

• Creates an airtight seal around the freezer door to prevent cold air loss
• Helps reduce frost buildup and maintain consistent internal temperatures
• Can improve cooling performance and reduce run time from air leaks
• Common symptoms: visible gaps, torn or deformed gasket, frost buildup, or higher-than-normal appliance run time

• Remove the old gasket and clean mounting surface of dirt and old adhesive before installing
• Start at one corner, align the gasket, and press into the door channel evenly for a full seal
• Some gaskets seat better after a short warm water soak or gentle stretching—follow OEM guidance
• If magnets or mounting clips are present, confirm they are engaged.