28Cf Parts

This fuel pump is a genuine Midwest Engine part, sold individually. This fuel pump can be used as a replacement part or a lawn tractor. The purpose of a fuel pump is to provide a passageway for fuel to channel through the fuel line and into the fuel tank.The fuel pump of a lawn mower or a lawn tractor might eventually have to be replaced in the event that it suffers damage and cannot perform its crucial function. If the fuel pump has been torn, scraped, punctured, or eroded from general wear and tear with long-term use or as the result of a direct impact with a hard object such as a rock or a curb, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel pump is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Cub Cadet, Simplicity, and Toro.

This hex-style palnut secures components on a 9/16-18 threaded stud or shaft, providing a low-profile locking fastener to help keep assemblies tight during normal operation. Simple, durable replacement for worn or missing retaining nuts. What it does:

• Locks onto a 9/16-18 threaded stud to secure pulleys, spacers, hubs or other rotating parts.
• Helps prevent loosening from vibration and normal use that can cause noise, wobble or part separation.
• Used where a low-profile, self-retaining nut is needed for reliable retention in tight spaces.
• Common service part when a threaded connection is loose, stripped, or missing its retaining nut.

• One (1) hex palnut, 9/16-18, unless a different quantity is specified at checkout.

• Verify the size and thread pitch match the stud before installing; do not force mismatched threads.
• Clean threads and inspect for damage; replace the stud or nut if either is worn or stripped.
• Hand-start threads, then tighten with the appropriate wrench; follow manufacturer torque/spec guidance when available.
• Disconnect power and follow all safety precautions before servicing moving parts.

Size: 20 inches x 20 inches.

A flat washer that provides a stable bearing surface to space and protect fastened connections. Designed to maintain proper part alignment and reduce metal-on-metal wear for quieter, longer-lasting operation. What it does:

• Provides a smooth, even surface for nuts and bolts to distribute load and prevent damage
• Maintains correct spacing and alignment of components to reduce binding and vibration
• Reduces metal-on-metal wear at connection points, helping prevent loosening over time
• Common replacement when fasteners are loose, noisy, or show visible wear

• Disconnect power and water to the appliance before attempting any repair
• Install flat against the mating surface; do not stack thin washers unless specified by manufacturer
• Do not overtighten fasteners; replace any damaged or corroded hardware for a secure fit

The starter is responsible for creating the electrical current that provides the power to turn the engine. It uses a pulley to engage the drive cup, which attaches to the flywheel and starts the engine when pulled. This specific model is designed for use with single-cylinder engines and is an OEM replacement that features a 12-volt power supply and 16-tooth plastic gear. The motor itself can become worn out over time and require replacement. In some cases, the starter can be damaged directly. If the starter is not in working order, the equipment will not run. This genuine OEM part will get the job done. This starter motor is designed to be compatible with more than 150 models of Briggs & Stratton engines on various lawn and garden equipment products such as lawn mowers, small engines, snowblowers, generators, and wood chippers. It is made of durable plastic and metal components and built to exact OEM standards.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

This is a rotating screen that protects the lawnmower engine from debris and dirt that could damage the engine. It is an authentic OEM replacement part sourced directly from the manufacturer for use on a variety of lawnmowers. If the screen becomes damaged or broken, dirt and debris could damage the engine or other critical parts. Without the screen, small animals and insects, like little birds and bees, could get inside the engine cavity and make nests. This could be detrimental to the engine and to the animal. During the inspection, if the screen is found to be damaged, it should be removed and replaced. A Torx driver is needed to remove the screen. Wear work gloves and make sure the spark plug has been removed from the lawnmower. Remove the Torx screws and set them aside for use on the new rotating screen. After removing the screws, the blower housing has to be removed in order to remove the screen. After the screen is removed, clean the engine cavity with a blower to remove any dirt or debris. Install the new cover, then reinstall the blower housing and spark plug.This rotating screen is made of durable black plastic and is sold as an individual part. It is designed for use on lawnmowers manufactured by Toro, Briggs & Stratton, MTD, and Craftsman.

This replacement part is an idle speed kit. This is a genuine replacement part made by Midwest Engine. This part is responsible for preventing the engine of many types of machines from stalling during idle time. A new idle speed kit might be needed if the engine stalls out when it is not in motion. This can be due to a faulty idle speed kit and should be replaced. It is important that before attempting to replace this part, the engine is completely off. This can affect the installation and cause damage to the engine. Be sure to wear work gloves when working near the engine of any machine. This part is a genuine OEM replacement part for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

A keeper valve is a small piece of hardware used to help to secure a valve. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, a lawn mower, a snowblower, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, MTD, and Simplicity.The keeper valve fits into a groove in the end of the valve stem to secure the valve spring, valve spring retaining washer, and valve stem together. It is only natural that, over time, the keeper valve may wear out from regular exposure to the elements, get damaged, fall out, or become lost. In any of these events, a replacement will become necessary.The replacement or repair process of the keeper valve should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This keeper valve is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually.

This replacement oil drain plug is a genuine OEM part for a lawn tractor or generator engine. The oil drain plug connects to the base of the oil tank and allows the appliance owner to drain used oil and replace it with new, clean oil. The oil drain plug is threaded to screw into the oil tank and prevent it from popping out of place while the appliance is in use. The most likely reason to replace an oil drain plug is if the old plug's threading has become stripped and no longer holds onto the oil tank. Alternatively, the plug is quite small and could easily be misplaced during an oil change. If lost, oil will leak from the engine, causing parts to overheat. Fortunately, replacing a lost or damaged oil drain plug is simple and only requires screwing a new plug into place. This replacement plug is a high-quality part that fits Craftsman and Murray products. It comes sourced from its original manufacturer and ships individually, without any additional hardware.

This replacement part is a nut. This part is small but important in various types of equipment. Nuts are able to work with other small parts such as washers and screws to secure equipment components in place.If a nut has become stripped or worn down over time, it is possible that it can no longer perform the function needed. Be sure to wear work gloves when working with small parts such as nuts to prevent injury during the repair. This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.