3150371 Control Knob Whirlpool Range Parts

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This specific screw is typically found in snowblowers and is responsible for keeping different parts in place and secure. A new screw might be needed if any current ones are missing or damaged. After years of normal wear and tear screws can become stripped overtime and might need replacing. To replace this part the user should only need a common household screwdriver and possibly pliers if the screws have become wedged in an area. Overall this should be a fairly simple repair depending on the amount of new screws needed.This is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually. Be sure the correct amount of screws are purchased as many machines require more than one to operate successfully.

This replacement part is a bearing. This is a genuine replacement part made by MTD. Bearings are small but important parts found in many different types of machines. This part is able to reduce friction among certain pieces in the engine and keep things running properly and efficiently.A new bearing might be needed if the current one is damaged or worn down in any way. Bearings might become stripped down over time due to normal wear and tear. If this is the case it is recommended that it be replaced immediately so that the machine can return to normal functioning. Work gloves are recommended when replacing these small parts. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This sleeve is a genuine MTD part. It is a replacement part for snow blowers and snow throwers primarily, but is also sometimes utilized on other small engine lawn equipment.Sleeve bearings are very important as they help with linear movements between two parts. They do this by absorbing the friction created by the two other parts, which reduces noise and vibrations. It is normal for them to wear out over time. Increased noise is one way to recognize this problem.This sleeve bearing is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Some machines require more than one sleeve bearing. It is compatible with equipment made by White Outdoor, Craftsman, Mastercraft, Columbia, MTD, Troy-Bilt, Cub Cadet, Yard Machines, Yard-Man, and others.

The clutch cable is a vital part of the snowblower, as it connects the control lever to the clutch in the machine's drive system. The cable is what allows the user to control the clutch. If the clutch cable is bad, it means the user will not have control over the clutch. The snowblower clutch cable could become corroded, or part of it could break in some cases. Regardless of what causes problems in the cable, it will need to be replaced before the snowblower will work properly. The authentic OEM replacement clutch cable is sold individually. This cable is only for use with snowblowers. Brands compatible with the cable include Cub Cadet, Craftsman, Huskee, Montgomery Wards, Bolens, Yard-Man, Yard Machines, Troy-Bilt, Ryobi, and MTD. When choosing a replacement cable, the owner must be sure that their choice will work with their make and model of snowblower.

This is a clutch cable with a special design to ensure it fits a variety of snowblowers from different manufacturers. The clutch cable is the component on the blower that connects the control level with the clutch in the drive system so the snowblower can operate properly. Clutch cables can be damaged in various ways but the most common is for them to entirely break. If this occurs, the wheels on the snowblower will not move across the lawn. The clutch cable will need to be replaced to continue using the tool.Replacing the clutch cable on the snowblower will require the use of a 7/16 inch socket and a 3/8 inch socket. The first step is to disconnect the spark plug wire and ensure the equipment is in the off position. Next, the cover can be removed from the snowblower to easily access the clutch cable. Remove the old one and replace it with a new part.It is an authentic OEM replacement component that is sourced directly from the manufacturer and sold individually. The clutch cable is designed to be used in snowblowers manufactured by Yard-Man, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Yard Machines, and MTD.

This is a flange bearing for use with some models of lawn and garden equipment from popular manufacturers. The flange bearing is cylindrical and features a flange at one end. They are used because they can support radial loads, as well as light axial loads. This bearing is placed between the rim and the tire. It will secure parts to ensure that the directional movement is correct, while still allowing for rotation.The mower flange bearing receives a lot of wear and tear from constant use, so they may need to be replaced more often than other parts. If the part is damaged or worn down, owners will want to replace it right away to ensure the proper functionality of the machine.The mower flange bearing can work with many types of lawn and garden equipment including chippers and snow blowers. It is compatible with certain models from MTD, Yard-Man, Troy-Bilt, Cub Cadet, Husky, and Yard Machines. The piece is sold individually, so owners might want to buy more than one at a time. The piece is a genuine OEM replacement part.

This replacement part is a pinion gear. This is a genuine replacement part made by MTD. This part is small but important to many different appliances. Pinion gears have ridges that are able to connect to other parts and typically rotate or turn in specific ways so that the engine operates properly.A new pinion gear might be needed if the current one is stripped down due to friction over time. If the user hears noises coming from inside the machine, the gears may be out of place or damaged. Work gloves are recommended during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer."

The drive V-belt, manufactured by Craftsman, is used in one- and two-stage snow blowers as well as tillers. This is a drive belt that connects the engine to the auger of the tiller or snowblower via a pulley at either end. This turns the blades of the tiller or the auger blades of the blower to expel snow. As a flexible, hardened rubber part connecting other moving parts, a V-belt is considered “replaceable,” meaning that users should expect to have to replace this part during normal use of the equipment. Signs that a drive V-belt may be going bad are a squealing sound when the blower's auger or the tiller's blades are first engaged, or if the auger is slow to engage and loses power during use. To replace the V-belt, the equipment must be secured and the spark plug caps removed. Tilt the device to reveal the location of the belt. It must detached from the engine pulley and the transmission pulley. When replacing the V-belt, before tightening the pulley, make sure all moving parts are properly aligned. This genuine OEM part is compatible with machines sold by MTD, Yard Man, Craftsman, and Yard Machine.

This v-belt is a genuine MTD part. It is a replacement part for snowblowers and snow throwers. The v-belt, or the auger drive belt, causes the auger to rotate on the snow blower. This part takes up the snow to throw it out of the way.It is normal for the v-belt to become worn over time. Signs that the v-belt needs replacement include malfunction due to the auger not running. To make this repair, be sure the engine has completely cooled, disconnect the spark plug to prevent accidental start, and empty the fuel tank.This v-belt is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with snow blowers and throwers manufactured by Craftsman, MTD, White Outdoor, Cub Cadet, and Troy-Bilt.

This authentic OEM replacement V-drive belt transfers rotation energy from one location to another in a lawn mower or snow blower. They connect to a series of pulleys, and as one pulley turns, the others also turn. This makes the engine more efficient. This belt connects the transmission to the wheels, causing them to rotate and propel the appliance forward. Over time, drive belts begin to fray and will eventually break if left for too long. If the belt breaks completely, the wheels will no longer rotate, making the appliance useless until the belt is replaced. It's best to check the belt before this happens. Replacing the V-drive belt requires a socket and pipe wrench to gain access to the pulley systems. This belt is compatible with lawn mowers and snowblowers from a wide range of brands, including Craftsman, Yard Machines, Huskee, Bolens, MasterCut, Ryobi, MTD, and more. This is a high-quality replacement part that comes sourced directly from its original manufacturer. This belt does not ship with any additional parts.

This V-belt is a certified genuine OEM replacement part for a snowblower engine. A V-belt is essentially just a loop of rubber but it is one of the most essential parts of the engine. The V-belt loops around a series of pulleys, and as the drive pulley is turned by the engine, the V-belt transfers that motion and turns the other pulleys. This allows the engine to run more efficiently. While an engine is running, the V-belt is constantly in motion, meaning that it receives a lot of wear. Over time, the rubber material will begin to fray, and if left too long, it will eventually slip or even snap. If the V-belt breaks, the transmission will no longer run and the auger blades will not turn. Therefore, it is important to check the V-belt's condition frequently. As soon as it begins to fray, replace it using a set of socket wrenches. Be sure to follow the owner's manual as a guide for how to loop the new belt. This replacement V-belt is compatible with MTD, Troy-Bilt, and Craftsman snowblowers and it comes sourced from its original manufacturer. This part ships individually.

This v-belt is a genuine MTD part, sold individually. This v-belt can be used as a replacement part for a snowblower. The purpose of a v-belt is to facilitate the rotation of the auger and the wheels so the snowblower can move over surfaces and blow snow out of the way of the operator and off of surfaces.The v-belt might have to be replaced in the event that it suffers damage to the point that it can no longer facilitate the rotation of the augur or of the wheels. If the v-belt has been compromised from a puncture, tear, rip, scrape, or sufficient erosion rendering it beyond functionality, the component should be removed and replaced by this genuine OEM replacement part before using the snowblower again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, and Yard Man.

This friction disc wheel is a genuine MTD part, sold individually. This friction disc wheel can be used as a replacement part for a snowblower or a chipper shredder. The purpose of a friction disc wheel is to propel the appliance forward when in operation.If the friction disc is damaged, it should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This friction disc wheel is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, Ryobi, Craftsman, Cub Cadet, Huskee, Montgomery Wards, Troy-Bilt, Bolens, and MasterCut.