316222902 Parts

This carburetor assembly is a genuine OEM replacement sourced directly from the manufacturer. This kit can be used with multiple trimmers, tillers, and various other outdoor lawn and garden gas engines. The carburetor assembly has all the parts required to fix the engine if the carburetor needs to be replaced. The carburetor is responsible for the fuel-air mixture ratio that fires the combustion process to start and run the machine. Problems with the carburetor will cause the engine not to run efficiently or not to run at all. If the engine spits and sputters when started or does not start at all, the carburetor should be tested. Testing is quickly done with a small amount of fuel. Remove the air filter and pour the fuel directly into the carburetor. Attempt to start the engine. If it starts but does not hold, the carburetor is the source of the problem and should be replaced or repaired. This carburetor assembly has everything needed to replace the carburetor. Always disconnect the spark plug and drain the fuel tank before working on the carburetor.This carburetor assembly is sold as an individual part. It is made to be compatible with trimmers, tillers, and small engines manufactured by Craftsman and MTD.

This is an MTD muffler screw designed to hold the cover of the muffler in place.The muffler screw is tightened in place in the center of the muffler cover using the proper screwdriver. Do not overtighten the screw, as this can cause potential damage and stripping. There should be no need for any extra fastening components to be added to the muffler.The part listed is a genuine OEM product and is sourced directly from the manufacturer. The component is sold individually. This product is compatible with MTD and Briggs and Stratton products.

This carriage bolt is a genuine MTD part, sold individually. This carriage bolt can be used as a replacement part in lawnmowers, snowblowers, tillers, and edgers. The purpose of the carriage bolt for one of these outdoor appliances is to work in conjunction with a nut to affix two metal components to one another or one metal component to another wood component.The carriage bolt in an outdoor appliance might have to be completely replaced if it cannot affix two or more components together. This could occur if the carriage bolt has been punctured, dented, cracked, warped, or eroded to the point that it loses its functionality. If this occurs, the carriage bolt should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This carriage bolt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard-Man, and MasterCut.

This O-ring is a genuine MTD part, sold individually. This O-ring can be used as a replacement part in a tiller, string trimmer, or edger. The purpose of the O-ring for one of these small engine outdoor appliances is to serve as a fastening component.This part may need to be replaced if it has been punctured, dented, chipped, cracked, warped, or eroded. The O-ring could also be lost or misplaced during other maintenance.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This O-ring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Yard Man.

This ignition module is a genuine MTD part, sold individually. This ignition module can be used as a replacement part in a tiller or an edger. The purpose of the ignition coil in a tiller or an edger is to fire the spark plugs so that the engine can be powered on.The ignition module in a tiller or an edger might stop functioning at some point within the standard lifespan of the appliance; this could occur as a result of general wear and tear, exposure to the elements, or a collision with a hard object that damages the component beyond functionality. If the ignition module no longer fires up the spark plugs when it is supposed to do so, the ignition module should be removed and replaced by this genuine OEM replacement part before using the tiller or edger again.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This ignition module is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Ryobi, Craftsman, and Troy-Bilt.

This replacement part is a throttle cable. This is a genuine replacement part made by MTD. This part is responsible for assisting the user in starting and stopping the appliance according to the desired settings. A new throttle cable might be needed if the current set of wires are stripped down or worn in any way. This can be from years of normal wear and tear or from a single incident that may have caused damage. If this is the case, it is recommended that this part be replaced as soon as possible. If the cable is unable to stay attached to the necessary parts, it should be replaced. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement gearbox assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken gearbox assembly in various models of tillers.The gearbox assembly is essential to the tiller's functionality as it is what rotates the tine shaft in order to spin the tines themselves. If the current gearbox is worn, malfunctioning, or otherwise broken, it will need to be replaced immediately. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this gearbox assembly, the appropriate owner's manual and equipment diagrams should be referred to. This gearbox assembly is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This part is a drive shaft housing assembly that is used on many tillers. It is made of high-quality durable plastic and is used to protect and secure the drive shaft in the machine. It also connects the tiller head with the engine to ensure the best results when using the tool. Impact, regular use, or wear and tear can create damage to the drive shaft housing assembly. When this occurs, the part will need to be replaced to ensure the shaft is protected while the tiller is in use.A wrench and a pair of work gloves may be useful for replacing the tiller drive shaft housing assembly. Before beginning, take the tiller and place it on a level surface. Make sure it is turned off and then disconnect the spark plug wire. Disassemble the tiller to get access to the housing and drive shaft before installing the new housing and reassembling the tool.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The drive shaft housing assembly is made to be compatible with tillers that are manufactured by MTD and Craftsman.

This is a cylinder assembly that is designed for use in various lawn and garden small engines. The cylinder assembly is a component of the starter assembly and engine. Problems with engine compression are usually the result of the cylinder assembly going bad and needing to be replaced. If the cylinder assembly is not working, the engine may not work at all. One test of the cylinder assembly is to cover the cylinder hole with a finger and pull the starter rope. If the cylinder is not working correctly, no air will come through the hole.If the cylinder assembly is not functioning, it needs to be replaced. The engine will need to be taken apart to get access to this assembly so that it can be removed and replaced. This repair requires work gloves and a basic toolset. Never work on hot engines and make sure the spark plug is removed before working on the machine.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder assembly is designed to fit blowers, cultivators, edgers, trimmers, and vacuums manufactured by Ryobi, Troy Bilt, MTD, Yard Machines, and Bolens.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This is a starter housing assembly that is often a part of tillers and string trimmers. It is made for gas-powered tools and is composed of durable metal. The starter housing assembly is responsible for helping to start the tool when a user pulls on the starter rope to engage the engine. The starter housing assembly comes with plastic housing, the starter pulley, the pull rope, and the recoil spring. It also includes the hardware needed for a replacement.The primary tool needed to replace a broken or damaged starter housing assembly is a wrench. The first step is to take the tool and place it on a flat surface before disconnecting the spark plug wire. Take out the screws that secure the starter housing assembly to the tool so it can be removed. Take the new component and secure it using the original or new screws.This starter housing assembly is sold as an individual part. The item is an authentic OEM replacement part that is directly sourced from the manufacturer. This component is created for use with tillers and string trimmers manufactured by MTD and Craftsman.

This part is a replacement ignition coil. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective ignition coil in cultivators.Ignition coils are important for powering the cultivator as they generate the voltage that travels to the equipment's spark plugs. If the ignition coil is faulty, the cultivator may have decreased power or may not work at all, thus this part may need to be replaced. Disconnect the spark plug wire before installing the ignition coil. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this ignition coil, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This ignition coil can be used with different models of cultivators that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Sold individually.