316224201 Parts

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

Support for broil heating element.

A carburetor may dry up after prolonged periods of inactivity, causing problems starting the engine. If this happens, the carburetor will need to be primed. Priming is adding fuel to the carburetor. Most lawnmowers have a priming bulb so you don't have to pour gas into the carburetor manually. This component is usually a small rubber button, which suctions fuel from the tank. To activate it, simply press it several times. If it fails to draw fuel, then a primer bulb may be needed. Primer bulbs can deteriorate due to old age, repeated use, and exposure to chemicals and the environment. For worry-free machine compatibility, choose this Primer Bulb & Hose Assembly made by MTD. It will work with trimmers, leaf blowers, and string trimmers from MTD, Bolens, Yard-Man, Craftsman, Ryobi, and Huskee. The assembly comes with one primer bulb and one hose. Extra fuel lines are available but sold separately.

This carburetor is a device for supplying a two-cycle engine with a mixture of air and fuel. This part comes pre-assembled and has a plastic choke lever along with a metal body. The primary purpose of a carburetor is to mix the right amount of fuel with air so that the engine runs properly. If enough fuel is not mixed with the air, the engine runs lean and can either stop running or gets damaged. On the other hand, if too much fuel is mixed with air, the engine runs rich, and it either floods, runs poorly, runs very smoky, or wastes fuel. The carburetor is in charge of getting the right mixture. If the carburetor is clogged, the engine will not get enough fuel. It may not start or may run rough. The procedure to replace the carburetor is quick and easy, taking only around 15 minutes, but it is recommended to work in a ventilated area. This carburetor works with outdoor power tools like the trimmer, leaf blower, and tiller. It is compatible with specific products from popular brands like Craftsman, MTD, Murray, and Troy-Bilt. It is sold individually and is supplied directly from the original equipment manufacturer.

A carburetor needs fuel to produce the required combustible mixture of air and gas. To get fuel, the carburetor draws the liquid directly from the fuel tank. Any excess fuel will be returned to the tank through the fuel return hose or fuel return line. In addition to providing the path, a fuel line is also responsible for preventing over-pressurization, as well as vapor lock. A fuel return line is constructed from a thick rubber material that is also fuel resistant. However, it may still become brittle and crack due to regular wear and tear. Usually, a broken fuel return hose results in symptoms such as engine misfires, loss of power, carburetor flooding, fuel leaks, and hard starting. A brand-new replacement is available here. This fuel line return is an original part from MTD. It measures 3.78 x 3.78 x 0.016 and is compatible with tillers, leaf blowers, and string trimmers made by Craftsman, Ryobi, Yard Machines, MTD, Bolens, and Yard-Man. Installation will require a screwdriver, cutters, and pliers. This fuel line return is sold individually.

This replacement clip secures components within your appliance. Replacing a broken, bent, or missing clip restores a firm hold on panels or assemblies to prevent shifting and reduce vibration noise.

• Holds specified parts or panels in place where a clip is called out in the assembly
• Helps maintain proper alignment and minimizes rattles/vibration
• Direct replacement for a damaged or missing clip
• Common symptoms: loose or misaligned parts, rattling during operation, clip visibly broken or missing

• Disconnect power before service; also shut off gas/water supplies
• Note the original clip orientation and placement; take a photo for reference
• Use needle-nose pliers for removal/installation; avoid overbending or deforming the clip
• Inspect mating parts for wear or damage and ensure the clip seats fully

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

A carburetor gasket is a thin rubber material that provides a seal between two parts. Its primary purpose is to prevent fuel and air leaks. This gasket is installed between the air cleaner and the carburetor. Over time, it can crack and tear due to heat and fuel exposure. When this happens, the carburetor may produce the wrong combustible mixture for the engine. In return, the engine may experience rough idling and flooding. A carburetor gasket replacement is necessary. MTD makes this carburetor gasket replacement. It is manufactured to fit string trimmer, leaf blower and tiller made by MTD, Bolens, Troy-Bilt, and Craftsman. This brand-new carburetor gasket is sold individually. A fully assembled carburetor and O-ring are sold separately.

This is a replacement spark plug that is designed specifically to be used with select string trimmers. the spark plug is connected to the ignition module and is responsible for creating the spark that starts the internal combustion engine. Over time, the electrode on the spark plug will wear down. Other issues can also arise that cause the spark plug to foul or stop working. Spark plugs are part of routine maintenance on any engine, but most owners keep a spare or two around just in case of emergencies. In the event that the spark plug is bad, the engine will not start. This genuine OEM spark plug is manufactured by MTD and designed for use in select trimmers. It is compatible with over 50 models of string trimmers from MTD, Bolens, Murray, Troy-Bilt, Yard Man, and Cut Cadet. Owners will need to consult their product diagram or manual to find the exact gap for the spark plug when replacing them. Many models claim to come pre-gapped, but they can settle during shipping and should always be re-gapped prior to installation. This is sold as an individual unit. Be sure to wear gloves for hand protection when replacing spark plugs and performing other maintenance.

A lawnmower’s fuel line or a fuel hose brings the fuel from the tank to the carburetor. It is made of durable translucent plastic material. When pushing the primer bulb, the gas from the tank will travel through the fuel line and to the carburetor. Once there is enough fuel, any excess will go to the return line and into the tank. Fuel lines are made from sturdy rubber or plastic. Over time the fuel line can crack and begin to leak. There are few symptoms of a broken fuel hose. One of the easiest ways to tell is if the hose has visible exterior cracks. Other warning signs include fuel smell and fuel leaks. Installing a new fuel line is easy and doesn't require any tools. Detach the old fuel pipe and insert the new replacement. This MTD 791-682039 Fuel Line Assembly OEM Replacement is an original four fuel line assembly compatible with Yard Machines, Yard-man, Ryobi, and Bolens. This replacement fuel line does not include the primer bulb and fuel return line. You need to purchase these parts separately.

Replacement oven door seal that creates a heat-tight barrier around the oven door to help maintain oven temperature and reduce heat loss. Restores proper door sealing for more even cooking and safer operation. What it does:

• Seals the oven cavity to retain heat and stabilize cooking temperature.
• Helps prevent heat, smoke and odors from escaping the oven during use.
• Replace when the gasket is cracked, flattened, torn, brittle or the oven takes noticeably longer to preheat.
• Improves door closure and can reduce energy loss when installed correctly.

• Disconnect power (and gas if applicable) and allow the oven to fully cool before starting.
• Remove the old gasket per the oven's service instructions; some models require removing the door or loosening fasteners.
• Press the new gasket into the door channel evenly, working around the perimeter so the seal seats flush.
• Wear gloves to protect hands from sharp edges.

These O rings are replacement parts intended for use in a number of gasoline-powered lawn trimmers. The O rings serve as gaskets and are placed at the entry and exit points in the carburetors where gasoline and air are mixed and the expansion powers the trimmer. Though constructed of durable material, periodically the flow of the air/fuel mix or the rush of expanding air will cause damage to occur to the O rings so they become less resilient and the carburetor functions less efficiently. In these cases, users often decide to replace not just the element of the carburetor but the O rings as well. Users may notice problems with the carburetor when they cannot get an adequate adjustment, allowing the trimmer to function smoothly. They may also have trouble getting the trimmers to start at all or run without smoking. To replace the O rings, remove the air filter cover and carburetor. Once the carburetor has been cleaned, and the gasket and filter replaced, add a fresh mix of 40:1 fuel. The trimmer should start immediately. These OEM certified O rings are compatible with Bolens, Troy-Bilt, Yard Machines, and Craftsmen trimmers.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This air filter cleans air entering the carburetor. As air passes through the filter, harmful contaminants are removed, making it an important part for keeping an edger or tiller in good working condition. Regular air filter replacement will improve fuel efficiency and prolong engine life. This air filter is made from a lightweight but durable foam material, making it easy to replace. Replace the air filter in an edger or tiller when it is worn or dirty. To replace an air filter, start by removing the spark plug ignition wire and then opening the cover that protects the air filter itself. Then, remove the old air filter and install the replacement. Once the new filter is in place, always ensure that the air filter cover is securely closed before reattaching the spark plug ignition wire. As an authentic OEM replacement part, this air filter can be used on multiple different Troy-Bilt edger models and Craftsman tiller models. Please note that these air filters are sold individually.

This fuel tank assembly from MTD is a genuine replacement part. It is a fuel reservoir made from a thick and durable plastic material. It is designed to fit and work with tillers, edgers, and string trimmers from MTD, Craftsman, Cub Cadet, and Yard Machines. When this fuel tank wears out, liquid may seep out and waste gas. A fuel tank assembly replacement is easy. The process will take approximately 30 minutes or less. First, make sure that the machine has cooled down and there is little fuel left in the tank. Make sure to wear gloves since fuel spills can occur, especially when removing the fuel lines. Then, remove the spark plug connector to prevent the engine from starting. Disconnect the fuel line and unfasten the mounting screws of the fuel tank. Install the fuel tank and attach the fuel line. This replacement fuel tank assembly is sold individually. The assembly includes the tank, fuel cap, and one fuel line. It is an original replacement made directly by MTD.

Replacement handle end cap that restores a finished appearance and secures the outer end of an appliance handle. Ideal for replacing cracked, chipped, or missing end caps that affect grip or the handle's look. What it does:

• Covers and protects the exposed outer end of a handle for a clean, finished appearance
• Restores proper fit and helps prevent further damage where the handle meets the door or drawer
• Addresses symptoms like a loose, chipped, cracked, or missing end cap that affects appearance or feel

• Installation method varies by model; part may snap into place or be secured with fasteners—refer to your model's service guide
• If working on a powered appliance, disconnect power before servicing
• Use appropriate hand tools and avoid prying on surrounding trim to prevent damage