33M02uc/50 Parts

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

A keeper valve is a small piece of hardware used to help to secure a valve. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, a lawn mower, a snowblower, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, MTD, and Simplicity.The keeper valve fits into a groove in the end of the valve stem to secure the valve spring, valve spring retaining washer, and valve stem together. It is only natural that, over time, the keeper valve may wear out from regular exposure to the elements, get damaged, fall out, or become lost. In any of these events, a replacement will become necessary.The replacement or repair process of the keeper valve should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This keeper valve is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually.

This replacement oil drain plug is a genuine OEM part for a lawn tractor or generator engine. The oil drain plug connects to the base of the oil tank and allows the appliance owner to drain used oil and replace it with new, clean oil. The oil drain plug is threaded to screw into the oil tank and prevent it from popping out of place while the appliance is in use. The most likely reason to replace an oil drain plug is if the old plug's threading has become stripped and no longer holds onto the oil tank. Alternatively, the plug is quite small and could easily be misplaced during an oil change. If lost, oil will leak from the engine, causing parts to overheat. Fortunately, replacing a lost or damaged oil drain plug is simple and only requires screwing a new plug into place. This replacement plug is a high-quality part that fits Craftsman and Murray products. It comes sourced from its original manufacturer and ships individually, without any additional hardware.

This replacement part is a nut. This part is small but important in various types of equipment. Nuts are able to work with other small parts such as washers and screws to secure equipment components in place.If a nut has become stripped or worn down over time, it is possible that it can no longer perform the function needed. Be sure to wear work gloves when working with small parts such as nuts to prevent injury during the repair. This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.

Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.

O-rings are used in various locations and applications to seal and protect connections throughout the engine. The O-ring is typically used for rigid connections where a proper seal is required for optimal functioning. It is critical to have the right size and style of O-ring installed for proper operation. These parts tend to wear over time and that can affect their ability to seal. If O-rings are degraded or damaged in any way, they need to be replaced as soon as possible to prevent further damage. This O-ring is manufactured to exact specifications by Briggs & Stratton to provide a genuine OEM replacement. It can be used in various Toro, Briggs & Stratton, and Lawn-Boy engines. Typically found in lawn tractor engines, this part is compatible with more than 150 machines. This O-ring is made from durable materials and sold individually. Always disconnect the spark plug before beginning engine work and wear gloves for hand protection.

The oil filter strains the oil as it runs through the machine, helping to remove debris and buildup to ensure that only the purest oil gets into the engine. Over time, oil gets dirty, and therefore so will the filter. This could lead to clogs and will eventually require replacement. Typically, oil filters are replaced as a part of routine oil changes, but there are some instances where an emergency replacement may be required. Replacing a clogged oil filter could improve the performance of the equipment and help reduce your emissions. To replace the oil filter, drain all of the oil from the engine and use an oil filter wrench to remove the old filter and screw the new one in place. Once the filter is secured, refill the oil and get back to using the equipment at the optimal operating performance. This Briggs & Stratton oil filter offers compatibility with a number of its lawn equipment engines. All genuine parts from this brand are designed to provide optimal performance and adhere to emissions guidelines. Be sure to check your user manual for fit and model compatibility.

This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.

This replacement part is a fuel line. This is a genuine replacement part made by Midwest Engine. This part is commonly found connected to fuel tanks and is able to provide the proper stunned for the fuel to travel through when needed. A new fuel line might be needed if the current one is no longer able to stay connected to the machine, if the current line is leaking in any way, or if the line has become damaged. This can be due to normal wear and tear over time and should be replaced if this is the case. Work gloves are recommended when working with parts that have touched fuel. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This intake valve is a genuine MTD part, sold individually. This intake valve can be used as a replacement part in lawnmowers, snowblowers, and wood chippers. The purpose of an intake valve for one of these outdoor appliances is to allow the flow of fuel and air in the proper ratio into the appliance so that the mixture can be created by the carburetor and then fed to ignite the spark plugs and power on the engine.The intake valve for one of these outdoor appliances might have to be completely replaced at some point within the typical lifespan of the appliance. This could occur as a result of general wear and tear from long-term use, collision with a hard object, or exposure to the elements. If this occurs, the intake valve should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This intake valve is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Lawn-Boy, Simplicity, Toro, and Briggs & Stratton.

This exhaust valve is a genuine Midwest Engine part. It is manufactured as a replacement part for lawn mowers, lawn tractors, snowblowers, wood chippers, and other small engines. The exhaust valve is a very important part, as it helps control the exhaust waste released by the machine. If it malfunctions, the engine could overheat or become damaged. Likewise, it can be dangerous for users to breathe near or operate a piece of equipment with a faulty exhaust valve. If the valve needs to be replaced, users will notice a reduction in fuel efficiency and also possible problems with engine functioning, especially after long periods of use. It is important to allow the engine and all other parts to cool completely. Disconnect the spark plug to prevent the engine from starting accidentally, and empty the fuel tank.This exhaust valve is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is manufactured for use with machines made by Briggs and Stratton, Craftsman, Cub Cadet, Toro, Lawn-Boy, MTD, and Simplicity.

This genuine Midwest Engine cylinder head can be used as a replacement part for outdoor appliances with small engines, such as lawn mowers, leaf blowers, vacuums, tillers, and snowblowers. The function of the cylinder head is to regulate the flow of air and fuel in and out of the cylinders; it is held in place by the cylinder head gasket and it seals the cylinder block.Damage to the cylinder head can occur naturally over time. Signs that a cylinder head needs to be replaced can include lower engine power than usual, lower fuel economy, otherwise unexplained oil leakages, engine misfires, and white smoke rising from the engine. In the case of these symptoms, it is likely that the cylinder head is cracked. If that is the case upon visual inspection, the cylinder head should be removed and replaced immediately before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This cylinder head is compatible with the following brands: Briggs and Stratton, Toro, Cub Cadet, and Simplicity. Part sold individually.

This is a flywheel key that is used in many types of lawn and garden equipment. It is fits into a slot located on the crankshaft. It also aligns with the keyway found on the flywheel. This flywheel key is tasked with ensuring the flywheel makes rotations in time with the crankshaft. The key can become damaged or lose and will need to be replaced to ensure the lawn equipment can continue to be used.Inspecting the flywheel key involves removing the gas tank and cowl from the equipment. From there, a user can determine whether the part is damaged or broken. If it needs to be replaced, the part can be removed from the flywheel, and a new flywheel key can be installed. The process takes little time and requires only a nut driver and a wrench set. Make sure to reassemble all parts before using the tool.This flywheel key is an authentic OEM replacement component sourced directly from the manufacturer. It is sold as a single part. The key can be used with wood chippers, leaf blowers, tillers, and lawnmowers manufactured by Simplicity, Briggs & Stratton, Cub Cadet, and Snapper.