35489 Parts

This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:

• Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
• Helps prevent moisture buildup and improves energy efficiency when sealing is restored
• Reduces rattling and vibration caused by a compressed or torn seal edge
• Commonly replaced when the strip is torn, missing, or no longer adheres properly

• One seal strip

• Disconnect power to the appliance before servicing to avoid electrical or burn hazards
• Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
• Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions

A 10-24 lock nut used to secure threaded fasteners and prevent loosening from vibration. Simple, durable replacement that restores proper fastening where the original nut has worn or failed. What it does:

• Secures shafts, studs, or bolts with 10-24 threads and resists loosening under normal appliance vibration.
• Restores proper tension where a stripped or loose nut causes rattling or parts shifting.
• Helps maintain alignment of panels, brackets, or components that rely on a locked fastener.
• Small hardware solution for common fastening failures—no special part modifications required.

• Disconnect appliance power and water before beginning repairs.
• Use the correct 10-24 threaded fastener and a properly sized wrench or socket to avoid rounding the nut.
• Tighten to a snug fit—do not overtighten or force onto damaged threads.
• Inspect mating threads and replace the bolt/stud if threads are stripped or damaged.

The filter pre-cleaner is a first-stage cleaning system for the air filter in combustion engines. Typically, a pre-cleaner will be made of a dense foam material and will fit around a cartridge-style air filter, adding an extra level of filtration for any air coming into the engine. Over time, both the pre-cleaner and the filter can become clogged with regular use and typically need to be replaced as part of routine maintenance. However, intermittent clogs and damage can also occur that would necessitate an emergency replacement. Many people keep an extra set on hand in case of urgent repair needs. This genuine OEM filter pre-cleaner is specifically designed to fit select Briggs & Stratton engine air filters. It is compatible with over 150 machines from the brand, as well as select Toro machines that feature Briggs & Stratton engines. Replacing the air filter is simple but gloves should always be worn for hand protection. Allow the engine to cool completely and check the air filter if you are replacing the pre-cleaner to ensure that it doesn't need to be changed, as well.

This air filter fits a number of gasoline-powered small engines that power various landscaping tools such as lawn mowers, woodchippers, generators, and other small engine powered devices. While most users understand the importance of an air filter for lawn equipment like mowers and edgers that kick up large amounts of dust and create clogging particulate, clean air filters are also essential for these other devices as well. Outdoor air is much dustier than most outdoor workers realize. With few exceptions, small engines create more particulate, much of it unseen. By their nature, air filters are designed to wear out by capturing so many airborne particles that air ceases to pass through the filter's elements. If a gasoline engine has enough fuel, yet it refuses to start, it's a good idea to check the air filter. Simply remove the air filter cover and take out the air filter. Start the engine. If it runs normally, the problem is the air filter. However, do not run the engine without an air filter for long periods of time. This replacement filter is OEM certified to be an exact replica of the original equipment filter. It is compatible with engines made by Craftsman, Toro, Briggs & Stratton, Simplicity, and Snapper.

Oil filter for most Intek and Vanguard engines and selected L-head twin cylinder engines. It is recommended to replace the oil filter at least once per season.

This exhaust gasket is located to fit between the exhaust system and the engine exhaust. It is used on many types of lawn and garden equipment. When operating correctly, the gasket will prevent exhaust from leaking. It also has sufficient flex to allow parts to expand when heat is present. The main purpose of a gasket is to prevent leaking. When the gasket is failing, it often leads to exhaust leaking from the joint.Many situations can cause an exhaust gasket to fail. The part can lose flexibility, dry out, or experience cracks. If the gasket chafes, it will lose its heat resistance and begin to dry out. When there is excess engine vibration, the gaskets can also tear. If this occurs, checking the engine mounts is important to ensure they are tightened and fully secure. Replacing the gasket involves removing the engine, taking out the old gasket, and putting a new one in its place.This exhaust gasket is a genuine OEM component sourced directly from the manufacturer. It is sold individually and fits lawnmowers, wood chippers, snowblowers, and generators from Briggs & Stratton, Toro, Cub Cadet, Snapper, MTD, and Simplicity.

This genuine starter solenoid transfers electrical current from the battery to the starter during the engine starting process, allowing the engine to engage. This part could become worn over time or develop electrical malfunctions, which could eventually lead to a need for a full replacement. In the event that the solenoid goes bad, it could result in poor engine performance or not permit the engine to start at all. This replacement part could provide an exact fit for compatible lawn and garden units. This genuine OEM solenoid from Briggs & Stratton is manufactured to exact specifications. It is compatible with engines used in select models of generators and other lawn and garden equipment made by the brand. This genuine OEM part is sold individually and does not include any hardware or additional components. It is imperative to disengage the spark plug and allow the engine to cool before performing engine repairs like replacing the starter solenoid. A wrench or socket set will be required to disconnect the old solenoid and install the new unit and gloves should be worn for hand protection.

A pinion gear is a small cylindrical component that is integral with a rack and pinion mechanism. Together with the rack, its primary function is to transform rotational movement into linear motion. Machines like lawnmowers and lawn tractors have a rack and pinion system. When the steering wheel of a tractor is moved, the gear will rotate, which engages the rack. Although this component is exceptionally durable, it is still subject to wear and tear. Some symptoms of a bad rack and gear mechanism include a loose or tight steering wheel and a grinding noise. Performing a do-it-yourself rack and gear replacement is possible and takes only 30 to 45 minutes. If the rack is in good condition, but the gear is not, omly a pinion gear replacement may be needed. This brand-new, genuine Midwest Engine 695708 pinion ensures quality and compatibility with lawn tractors, generators, mowers, and engines from Midwest Engine, Briggs & Stratton, and Craftsman. The gear is sold individually. An original Midwest Engine Gear Ring is not included.

Color: Black

This oil seal is a genuine Midwest Engine replacement part for outdoor appliances with small engines, such as lawn mowers, snowblowers, and wood-chippers. The function of an oil seal is to protect an appliance from accumulating dirt, debris, and gunk in its inner workings as well as to avoid potential oil leaks.If an engine is subject to oil leaks, it could be because of a damaged or malfunctioning oil seal. Diagnosing an oil leak can be tricky, as there are many aspects of the engine that, if compromised, can lead to leakage. This can be tested by running the engine until the leak occurs and then checking to see if the leak originally stems from the oil seal. If it is ascertained that the leak is indeed a result of a damaged oil seal, this genuine OEM oil seal can serve as a replacement part in the case that damage has occurred to the original. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This oil seal is compatible with the following brands: Briggs and Stratton, Simplicity, and Toro.

This genuine Midwest Engine starter drive is positioned between the starter motor shaft and the engine's crankshaft. The function of the starter drive is to coordinate motion between those parts, with the pinion on the starter drive aligning with the flywheel on the crankshaft. If the starter drive is suffering from damage, there may be a grinding noise coming from the gears, an improperly starting engine, or black smoke pouring out of the exhaust. If these symptoms point directly to the starter drive, then it must immediately be removed and replaced with a genuine OEM part before the appliance is used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This starter drive is compatible with the following brands: Midwest Engine, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Wheel Horse, Lawn-Boy, MTD, MasterCut, and Simplicity. It can be used as a replacement part for the starter drives inside the small engines of snowblowers, wood-chippers, lawnmowers, tillers, generators, and other such outdoor appliances. This part is sold individually.