35879409 Parts

This gasket kit features replacement gaskets for use in a range of gas-powered handheld lawn and garden machines. The kit includes a range of O-rings, seals, and gaskets used as a means to provide tight seals between elements of the engine to prevent leaks from air, fuel, oil, and so forth. Even durable gaskets such as those found in engines will start to wear down over time. They can start to crack and break, and sometimes they will shrink. When this happens, they no longer provide a tight seal and will need to be replaced. It is recommended that the gaskets and seals are replaced whenever the owner is servicing their small engine. This will ensure a proper seal when the engine is reassembled. This gasket kit has genuine OEM parts to ensure a proper fit and a tight seal. The kit is sold individually and works with many models of string trimmer and edger. Compatible brands include Craftsman, Husqvarna, Weed Eater, and Poulan.

This kit includes all parts necessary to repair the carburetor on certain models of small engine outdoor power equipment.Internal combustion engines require a proper ratio of air to fuel in order to run. The carburetor is responsible for sending a combination of fuel and air to the motor for ignition. Because the carburetor is used every time the engine is started, it can deteriorate over time and may need to be repaired or replaced. Signs of a worn-out or deteriorating carburetor include backfiring, overheating, excessive black smoke, and reduced engine performance. This carburetor repair kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor repair kit can be used to fix various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

This replacement part is a crankshaft seal. This is a genuine replacement part made by Husqvarna. This part is commonly found in line trimmers or edgers. This seal is found towards the front of the engine and is responsible for sealing the area so that there are no leaks during use. A new crankshaft seal might be needed if the user notices there are leaks coming from the engine. This can be due to the rubber on the seal being stripped down and no longer able to function properly. Wear work gloves when completing this repair, as this part is typically close to the engine and could cause injury. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a recoil starter pulley kit that can be used as a replacement for many different models of handheld trimmers and similar outdoor power equipment. The starter pulley is an important part of the starter mechanism in the engine. When the user pulls the rope to start the engine, the pulley will engage the flywheel, which will then allow the engine to start running. Owners might find that they need to replace the recoil starter pulley at some point. Over time and with a lot of use, this part can begin to wear down. Elements of it could break or wear away. If this happens, it will be difficult to get the engine started because the pulley will not properly engage the flywheels. Sometimes, it might be impossible to get the engine started at all. The owner will then need to replace the recoil starter pulley. This is a genuine OEM replacement part that is sold individually. The pulley can work with many models of pole pruner, string trimmer, and leaf blower. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro.

This is a momentary switch kit is special switch that is used to turn the handheld leaf blower off and on. It's made of durable plastic that houses a switch with two tabs on the sides. Through time and use, the momentary switch kit can start to malfunction due to damage or wear and tear. When this happens, the momentary switch kit will need to be replaced. A broken switch kit will not allow a user to turn on and off the leaf blower.Replacing the momentary switch kit doesn't require the use of tools. A set of work gloves can be useful for the process. Make sure the engine is shut off, and the spark plug wire has been disconnected. Take off any covers needed to access the momentary switch. Remove the switch from the wires and install the new part.This is an authentic replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The momentary switch kit is designed for use with leaf blowers manufactured by Craftsman, Weed Eater, Poulan, and Poulan Pro.

This OEM carburetor is designed as a replacement for compatible leaf blowers. The carburetor takes in air and fuel and mixing them together before sending the mixture onto the engine to power the machine. The air comes in through an air filter to remove any impurities and then it passes into a smaller inner chamber, where fuel is injected through small holes in the chamber after also being filtered. Then, the two mix and are passed into the engine through an adjustable butterfly valve. If the engine isn't performing well or will start but won't stay running, the carburetor could be in need of replacement. It’s usually easier to replace the entire assembly than individual parts, and this genuine OEM part can provide the solution for machines it fits. This carburetor replacement is specifically designed to be compatible with select Craftsman, Poulan, and Husqvarna leaf blower engines. The carburetor does not include any gaskets or hardware required for replacement, so those will need to be purchased separately if they are required. Be sure that the engine is completely cool before beginning repairs and wear gloves for hand protection whenever performing engine work on any machines.

This J tube is used to attach the vacuum tube to the vacuum bag. In order for the leaf blowers to function correctly, the tubing needs to be in prime condition to seal the air moving through the machine. This will enable full functionality of the blower. It's made of a durable black plastic, and will need to be replaced if cracking or warping is experienced. Exposure to elements as well as general use will lead to a need for replacement over time. Replacement is needed if visible cracks or drying is seen in the tubing, or if noticeable difference in amount of air moving through the vacuum component is hindering full use. Replacement is simple, and doesn't require tools. Separate the old part from housing, and replace it with the new part. This part is compatible with the Poulan and Weed Eater brand leaf blowers and gas powered leaf blowers. The wave washer is an OEM part sourced directly from the manufacturer, and it is sold individually.

This part is a replacement upper tube blower. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty or damaged upper tube blower on a variety of leaf blower models. This particular upper tube blower is used with gas powered leaf blowers. This part connects the lower tube to the blower housing. No special tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this upper tube blower, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this upper tube blower is suitable for use on several different models of leaf blowers manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.