440Yw Parts

This fuel tank is a genuine Husqvarna part, sold individually. This fuel tank can be used as a replacement part for lawnmowers and lawn tractors.The fuel tank might have to be replaced if it suffers damage that prevents it from being able to store fuel. This could occur as the result of damage in the form of puncturing, tearing, ripping, or eroding to the material of the fuel tank so that fuel leaks out of the tank and into the appliance. If this occurs, the fuel tank should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a chain tensioner kit that is used on chainsaws. A chain tensioner kit allows the operator to tension the chain. This kit includes the adjustment bolt, pin, gear, and o-rings. The parts in this kit are manufactured out of high-quality and durable metal. A new chain tensioner kit may be needed if the bar does not adjust when the operator turns the tension screw. If this is the case, this usually means that the adjustment bolt is worn or damaged. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines. Never perform care and maintenance on an outdoor power equipment machine that is powered on.This chain tensioner kit is a genuine Husqvarna part. It is sold individually. This particular chain tensioner kit is compatible with chainsaws that are manufactured by the Husqvarna brand and the Craftsman brand.

The blade support is found between the blade and the bolt. As its name suggests, it is designed to provide support for the blade to ensure it is secured to the base of the mower deck. It is made of metal and it will need a replacement if it becomes worn or damaged. To replace a blade support or blade spacer, first, the engine needs to be cool. Remove the wire and boot from the spark plug. Tip the mower back on its handle assembly and use a piece of wood or sturdy object to hold the cutting blade in place. Remove the old blade support and blade. When installing the new one, ensure that the blade's sharp edge faces away from the mower deck. Re-thread and torque the bolt between 40 and 50 ft-lbs. This is an original OEM replacement part for lawnmower blade support made by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, MasterCut. It is sold individually.

The Ground Drive Knob is an OEM Replacement Part designed for use with Husqvarna shift rods. Made out of plastic, this component features a 1/2-inch hole for easy installation. The knob is essential for the operation of the shift rod, allowing for smooth and efficient gear changes. No tools are required for the replacement process, making it a straightforward task. If the knob breaks or strips, it will need to be replaced to ensure the proper functioning of the shift rod. Please note that the lifespan of this part may vary depending on usage and maintenance.

This is a genuine replacement drive belt that is manufactured for use in select riding lawn mowers that feature double idler pulleys. This belt is specifically used on models that feature a 38- or 42-inch deck. Its job is to use the pulleys to engage and drive the cutting blades on the mower deck. Belts are subject to repetitive motion and high heat, which can cause them to crack or corrode, or even snap entirely. Replacing belts is typically considered a part of lawn mower maintenance, but some owners choose to keep an extra belt on hand in case of emergencies. Belts can also become stretched with excessive use, causing them to slip and lead to poor cutting performance. This is a genuine OEM drive belt from Husqvarna. It is compatible with select mowers from Poulan, Craftsman, and Husqvarna and fits more than 150 different models. It is made of durable rubber and will require a screwdriver or pry bar to install. Always be sure to disengage the engine and allow it to cool before performing any repairs. It is a good idea to secure the mower wheels when working under the deck, as well. This belt is sold as an individual unit and does not include any additional components.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

A small metal clamp that secures the refrigerator's capillary (temperature sensing) tube to the cold control so the thermostat reads temperatures accurately. Replaces worn or missing clamps to keep the sensing tube stable and prevent movement-related issues. What it does:

• Holds the capillary/sensing tube firmly against the cold control or cabinet
• Helps maintain accurate thermostat sensing by preventing tube movement
• Reduces vibration or rattling from a loose sensing tube
• Stops intermittent temperature swings caused by a displaced capillary tube

• Disconnect power before servicing the appliance.
• Handle the capillary tube gently; avoid kinks or sharp bends.
• Install clamp over the tube and secure to the control or bracket using the factory hole or fastener; do not overtighten.

This is a brand new steering column flanged bushing for use with different outdoor power equipment. This bearing can be found on the front axle and contributes to the function of the steering system. It is made from plastic and is 25/32 in height with a flange outside diameter of 1 1/8in. A worn bushing can contribute to the excessive wear on the steering gears. Sloppy steering is one of the signs of a worn bushing. Use a wrench to remove or attach this part. This OEM part is sourced from the manufacturer and is sold individually. It works on certain ride mowers from many brands, including Craftsman, Husqvarna, Poulan, and Weed Eater.

This hub cap is manufactured by Husqvarna and comes in glossy black color. The main function of a hub cap is to provide a protective barrier or cover for the wheel hub and lug nuts against dirt, grime, and other harmful elements. Wheels that do not have hub caps are more susceptible to damage. Corrosion or rust on the lug nuts is common for wheels free of hubcaps. This results in harder lug nut removal. Over time, rust can spread and damage the hub. With hub caps installed, costly repairs and replacements are no longer a concern. Installing a hub cap will take less than five minutes. A rubber ballet can be used to push the hub cap to the wheel hub. To install this genuine front hub cap, simply push it down or use a rubber mallet. When protecting the hub and axle of a lawnmower, this Husqvarna 532104757 Front Axle Hub Cap OEM replacement is an option. It is an OEM front axle hub cap compatible with most Husqvarna Weed Eater, Poulan and Craftsman tractor and mower models. This front axle hub cap is sold individually.

This replacement deflector shield is a genuine OEM part intended for use on lawn mowers and tractors. It attaches to the side of the mower and directs grass clippings away from the blade as it mows. This serves to keep grass from bunching up in the blade, which could cause it to stall out. The direction of the deflector shield also blows grass clippings behind the mower to keep any potentially hazardous debris from flying up at the mower. Deflector shields can become dried out and brittle over time and can snap off if the mower drives too close to a wall, tree, or other hard object. Deflector shields usually only need replacing if they break. This would cause grass clippings and debris to fly in all directions, which could be dangerous for the user. Replacing the deflector shield is an easy repair and only requires a socket wrench set. This part is compatible with a wide variety of Husqvarna and Craftsman lawn mowers and tractors and is sourced from the original manufacturer. This product ships individually.

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

This is a rear tire for a lawn mower or lawn tractor. Tires are critical to the smooth, comfortable operation of a lawn mower, and their lifespan depends on how they are used. Lawn mower tires that are used more frequently, or on rougher terrain, will typically have a shorter lifespan. Lawn mower tires may lose traction over time with repeated use. They may also weaken and be unable to hold air pressure for long periods of time. Occasionally, a lawn mower tire may become punctured or damaged. Lawn mower tires may also degrade through exposure to extreme weather conditions, such as heat, rain, wind, and cold. A visual inspection can help determine whether it is time to replace the tire. Depending on the condition of the tires, it might be necessary to replace both rear tires at once. This can ensure a smooth, even mowing experience, and prevent additional damage to the mower. This lawn mower tire is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers and lawn tractors made by Jonsered, Poulan, Ariens, Husqvarna, Craftsman, Rally, Yard Pro, Murray, Ryobi, Weed Eater, Western Auto, Companion, and Southern States.

This replacement part is an ignition switch and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. The ignition switch is an important part of many different lawn mowers, as it allows the appliance to be turned on.A new ignition switch might be needed if the current one is damaged, broken, or if the key blade is snapped off in the ignition. If the user is unable to start the machine through the ignition switch, it is likely damaged or malfunctioning. It is possible for the ignition switch might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This part is an ignition module that is used on chainsaws. An ignition module is a component of the engine ignition system. This part connects the spark plug to the engine and supplies power that helps create the spark which starts the engine.A new ignition module may be needed if the original is cracked, broken, or damaged in any way. The ignition module may become damaged or worn after normal use over a period of time. If this is the case, the ignition module will need to be replaced for the chainsaw to turn on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This ignition module is a genuine Husqvarna part. It is sold individually. This specific ignition module is compatible with chainsaws that are manufactured by Husqvarna, Poulan, and Jonsered.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.