47812201 Parts

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part in lawnmowers, snowblowers, and wood chippers. This part assists in fastening two components together by creating a slight gap that reduces friction.The spacer might have to be replaced if it is lost, misplaced, or damaged from general wear and tear with long-term use. If the spacer is lost at some point within the typical operation of the appliance and its absence is noticed by the operator, the spacer should be replaced by this genuine OEM replacement part. If the spacer is damaged beyond functionality, the spacer should be immediately replaced. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This spacer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Huskee, Yard Machines, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

The fuel drain plug gasket creates a solid, leak-proof seal in the fuel drain. The gasket goes into the connection between the drain and the fuel tank. In the event that this gasket fails, there could be fuel leakage from the equipment that could be costly or even dangerous. Make sure to inspect and replace all gaskets regularly to ensure that the engine is working efficiently. This gasket is made of durable rubber material and is simple to install. drain the fuel to provide access to the drain plug and the fuel line without spilling fuel everywhere. Always wear gloves and make sure to disconnect the spark plug or disable the engine before working on any outdoor power equipment. This OEM replacement fuel drain plug is compatible with several tillers, snowblowers, lawnmowers, tractors, and other outdoor power equipment made by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut. Sold individually.

This part is a replacement oil seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, worn, or defective oil seal in outdoor power equipment. The oil seal helps to prevent oil from leaking from the engine sump. If the user notices an oil leak, this seal may need to be replaced. When working on or near an engine, it is important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this oil seal, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this oil seal is suitable for use on several different models of outdoor power equipment manufactured by MTD, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This valve spring retainer is a genuine OEM replacement part that is designed for use with select snowblowers and snow throwers. The valve spring retainer is responsible for holding the valve spring in place, which then controls the valvetrain. The retainer secures the spring so that it can provide the right amount of pressure to ensure that the system can operate without valve b, which can damage the engine or cause faulty operation. If the valve spring retainer fails or is damaged, which can happen with regular use over time, it will need to be replaced to ensure the spring remains in place during the operation of the machine. The retainer is a metal collar-type piece and although it is durable, it could wear out or break due to several different potential situations. Regardless of the cause, a replacement must be made with an OEM part like this. This genuine part is manufactured to specific OEM standards by MTD, and is compatible with more than 150 units from MTD, Yard Machines, Yard Man, Troy-Bilt, Husky, and Cub Cadet. It is sold individually. Be sure to wear gloves and allow the unit to cool completely before performing any type of repairs.

This is an exhaust valve adjuster that makes up part of the engine in several types of lawn and garden equipment. It's made of durable metal and works with the valves in the tool. Whenever a valve opens, the exhaust valve adjuster moves the valve a small degree. The purpose of this is to prevent deposits of carbon from building up on the valve and the valve seat. Having cleaner valves helps drop emissions and can prevent guttering and burning of the valve seat and face.If the exhaust valve adjuster is damaged, it will need to be replaced. This involves taking the motor out of the equipment and pulling apart the engine. Store the parts so they will be easy to put back together later. Add oil to the exposed metal surfaces before taking out and cleaning the valves and heads. Remove the exhaust valve adjuster that is damaged and replace it with a new component.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The exhaust valve adjuster is compatible with lawnmowers, log splitters, and snowblowers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Yard-Man, and Huskee.