500 Parts

This control cable is a replacement part for use with many models of walk-behind mowers. The cable connects to the mower's control bar and is used to run the engine. When the cable is released, the engine will shut off. It is an important part of the machine, and if it is broken, it will not run.The cables are durable, but they may break over time. In some cases, they might wear out and snap or break from damage. In other cases, the ends might snap and break off. The cable might fray or kink, as well. Regardless of the problem, the owner will want to replace it right away.This control cable is for use with select mower models from Yard-Man, Husky, Yard Machines, and MTD. The cable is sold individually. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This ignition set consists of an ignition breaker and condenser. It is made of durable materials and uses a mechanical switch to close the electrical system and make a spark. If these parts are not working correctly or are broken, the engine on the lawn equipment will not start so the machine cannot be used. If the ignition set might not be working, use a spark tester with a plug lead to test. Place the control on stop or shut it off and attempt to turn on the engine using a key or cord. There should be no spark. When in the on position, a spark should be present. If the spark doesn't occur, there may be broken wires, grounds, shorts, or defects, so the parts will need to be replaced.This ignition set is a genuine OEM replacement part that was sourced directly from the manufacturer. It is sold as a single kit. The part is designed to be used in lawnmowers, tillers, leaf blowers, and snowblowers created by Cub Cadet, Briggs & Stratton, Broan, Lawn-Boy, and Toro.

The fuel cap is a simple but important part of a lawn care machine. It provides a seal that helps to keep dirt and other debris from getting into the fuel and contaminating it. Over time, though, there may be issues with the fuel cap. It might no longer tighten properly, form a proper seal, or be lost all together. This is an authentic OEM replacement part from the manufacturer. This fuel cap can work with a range of lawnmowers, tillers, leaf blowers, generators, and other small engine equipment. It is compatible with brands like Briggs & Stratton, Toro, Cub Cadet, Simplicity, and Craftsman.

This is a carburetor overhaul kit. This kit contains all of the needed components to rebuild a lawn tractor carburetor. A carburetor overhaul kit is needed to fix problems including worn-out gaskets or diaphragms, gas or air leaks, and sluggish performance.A carburetor mixes fuel and air before delivering it to the engine. The diaphragm helps regulate the amount of fuel that is in this mixture. The gaskets create a seal that keeps unnecessary air out so that the engine works properly. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Signs that the carburetor diaphragm has gone bad include the engine not starting, cutting off while running, excessive smoke during use, or engine revving sounds produced independent of the operator. All of these signs indicate that a carburetor overhaul kit is needed.This is a genuine OEM part sourced directly from Midwest Engine. It is sold individually. This kit is compatible with lawn tractors manufactured by Midwest Engine, Briggs & Stratton, Toro, and Murray.

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.

This idler pad is made for lawnmowers and other lawn and garden equipment. It's a part of the brake system and ensures that the equipment stops when someone requests it should. While the idler pad is durable, it will need to be replaced when it starts to wear down. Because of this, it's important to check for wear and tear on a regular basis as part of lawnmower maintenance.If there is wear or damage to the idler pad, it will need to be replaced for safety purposes. Make sure the tool is on a stable surface and powered off before starting the replacement. Remove the wheel on the equipment before taking off various parts to reach the brake system where the idler pad is found. A screwdriver and socket set will be needed to complete the process. Remove the old idler pad and replace it with a new one before reassembling the yard tool.This idler pad is compatible with lawn tractors, tillers, and lawnmowers created by Craftsman, Husqvarna, Weed Eater, and Poulan. It is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part.