630A Parts

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This inner door panel replaces a damaged or worn dishwasher door interior to restore proper door fit and help prevent leaks and rattling. It fits behind the outer door and supports the latch and internal components. What it does

• Forms the interior surface of the dishwasher door and helps keep water inside the tub
• Supports latch, insulation, and any door-mounted components
• Restores proper door alignment and reduces noise from a loose or dented door
• Commonly replaced when the door is dented, cracked, or showing signs of water intrusion

• One inner door panel

• Disconnect power (and water, if applicable) before starting; follow all safety precautions
• Removing the outer door panel and handling any attached wiring or insulation may be required
• Handle edges and any glass with care to avoid cuts or breakage

This door pivot hinge secures and guides an appliance door so it opens and closes smoothly, helping maintain proper door alignment and sealing. It's a direct-fit replacement designed to restore stable door operation. What it does:

• Provides a pivot point to support the appliance door and maintain alignment
• Helps ensure the door closes fully to preserve internal temperature and performance
• Reduces door sag, rubbing, or misalignment that can cause uneven wear or gaps
• Can stop squeaks or binding caused by a worn or damaged hinge

• One hinge

• Disconnect power and empty the door area before starting; follow manufacturer safety instructions
• Support the door during removal and installation to prevent damage or injury
• Use existing fasteners unless replacements are specified by the manufacturer
• Tighten mounting hardware securely and check door alignment after installation

This insert is a replacement trim piece designed to restore the appliance's finished appearance and secure adjacent panels. It helps cover gaps and keeps exterior surfaces aligned for a clean, factory look. What it does:

• Replaces a cracked, chipped, or missing trim insert that exposes panel edges
• Helps maintain proper panel alignment and prevents rubbing or catching
• Restores the original finished appearance of the dispenser/door area
• Useful when trim fastening points are intact but the visible insert is damaged

• High-level replacement: typically snaps or slides into place—no specialized tools required
• Disconnect power or follow maker safety guidance when accessing interior panels near electrical components
• Inspect surrounding clips and fasteners; replace if worn to ensure proper fit

This sump clamp secures the dishwasher sump/drain assembly to the tub, keeping the seal and pump assembly held in place to prevent leaks and movement. It's a small but essential fastener for a watertight sump connection. What it does:

• Holds the sump/drain housing tightly against the tub to maintain a proper seal
• Prevents the sump assembly from shifting during operation, which can cause leaks or noise
• Helps stop water from leaking under the machine when the pump runs
• Supports proper alignment of the drain/pump components for reliable draining

• One sump clamp

• Disconnect power and water supply before starting any repair
• Access the sump area by removing the lower access panel or toe kick and tilting the machine as needed
• Inspect the sump seal/gasket and replace if cracked or damaged when replacing the clamp
• Tighten clip until secure but avoid forcing or deforming the sump housing; test for leaks after reassembly

This outer door is the external front panel that restores the appliance's appearance and protects internal door components. It replaces a damaged, dented, scratched, or cosmetically worn outer door to give your appliance a finished look. What it does

• Replaces the appliance's external front door panel to cover and protect inner door layers
• Restores a smooth, damage-free exterior and proper door alignment for better sealing
• Helps eliminate rattling or cosmetic issues caused by dents or corrosion
• Compatible with factory door hardware and trim when installed correctly

• One outer door panel

• Handle with care; outer panels can be sharp along edges—wear gloves and eye protection
• Disconnect power and follow OEM service manual instructions before removing the appliance door
• Installation may require removing inner door layers and transferring hardware; retain all fasteners

This water softener cartridge helps reduce hard-water minerals in dishwasher cycles to limit spotting and buildup for clearer glassware and cleaner dishes. Fits into the dishwasher's water-treatment area to help maintain wash performance. What it does:

• Uses ion-exchange media to reduce hardness that causes spotting and cloudy glass
• Helps prevent mineral deposits on heating elements and interior surfaces
• Improves detergent effectiveness for better cleaning and rinsing
• Common symptom: persistent spots or white film on dishes and glasses

• High-level replacement: disconnect power and water supply before servicing
• Access requires removing the dishwasher's outer tub/top panels per service manual
• Handle cartridge and internal parts carefully to avoid damaging seals or gaskets

A cotter pin is a standard piece of hardware typically used on lawn and garden equipment as a method of securing something to an axle or round shaft. These pins are thin and, although they are durable, they can rust or become damaged over time. In some instances, they can break off or become lost in the process of other repairs. A replacement with the right size and style of cotter pin will ensure that equipment is in working order at all times. This genuine OEM cotter pin replacement can be used with select lawn and garden equipment from MTD, Huskee, Yard Man, Yard Machines, Troy-Bilt, Bolens, Cub Cadet, and Murray. It can be used on lawn tractors, log splitters, chipper/shredder units, and snowblowers. There are more than 150 compatible units, so owners should consult their parts diagram for application(s) of this pin. Note that this pin may have multiple applications on a single machine. This cotter pin is sold individually and may require needle nose pliers to replace.

This hubcap is an authentic OEM replacement part sourced directly from the manufacturer for use on log splitter and chipper wheels. The hubcap covers the central opening of the wheel assembly. This prevents dirt and debris from getting into the wheel assembly. If the hubcap comes off during use or is lost when replacing tires, a new one should be installed. The machine will work without a hubcap; however, the interior wheel assembly will be open to flying debris and could be damaged if rocks or large limbs go into the wheel assembly. During routine inspection and maintenance, the hub caps should be checked for damage and to make sure they are in place.The hubcap is easily removed and replaced with a screwdriver needed to pry the old hubcap off if it is still on the machine. The new hubcap simply snaps into place. This hubcap is made of high-quality metal and is sold individually. This hubcap is designed to be used with log splitters and chippers manufactured by MTD, Cub Cadet, Troy Bilt, Husky, and Yard-Man.

This shaft for the float switch is the replacement shaft that secures and guides the dishwasher float to accurately detect water level, helping the appliance fill and shut off properly. Direct-fit design replaces the worn or broken float shaft. What it does

• Guides the float so the level-sensing switch can detect low or high water levels.
• Prevents overfilling by ensuring the float actuates the water-level switch reliably.
• Commonly replaces a cracked, bent or missing shaft that causes inconsistent fill, continuous filling, or water-level errors.

• One replacement float switch shaft.

• Disconnect power to the appliance before starting any repair.
• Remove the access panels and float assembly per your model's service instructions to reach the shaft.
• Inspect the float and switch for damage; replace only the failed components as needed.
• Reassemble carefully and test fill/stop operation before returning the appliance to service.

This temperature sensor (thermistor) measures appliance temperature and sends a signal to the control board so the unit can maintain proper cooling cycles. Replaces a failed or intermittent sensor for more reliable temperature control. What it does:

• Detects internal temperature and provides a changing resistance signal to the control board
• Helps the control board regulate compressor and fan operation for consistent cooling
• Commonly linked to symptoms like incorrect temperatures, frequent cycling, or related error codes
• Works as a direct-replacement sensing element

• One temperature sensor (thermistor) as pictured

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or pinching the harness
• Access may require removing interior panels or covers; keep mounting hardware for reinstallation
• Test with a multimeter or follow OEM service instructions before replacement

This water inlet valve controls incoming water flow to the appliance, ensuring proper fill during cycles and helping prevent overfilling. Replaces a worn or leaking valve to restore normal water delivery and cycle performance. What it does:

• Opens and closes to allow water into the appliance when a cycle requests fill.
• Prevents water flow when the machine is idle, helping avoid leaks or flooding.
• Commonly fails when leaking, not filling, or filling continuously.
• Electromechanical valve operated by the appliance's control board or timer.

• One water inlet valve

• Disconnect power and turn off the water supply before starting any work.
• Verify valve orientation and hose connections match the appliance before finalizing installation.
• Inspect inlet hoses and clamps for damage; replace if brittle or cracked.

This replacement part is a wheel intended for use in lawn equipment. This is a genuine replacement part made by MTD. Wheels allow the user to move the machine with ease and precision. Many different appliances are made to be easily transported and moved around on wheels. A new wheel might be needed if the current ones are worn down or broken in any way. It is not unusual for this part to require replacement after years of normal use as the wheels might lose traction overtime. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is suggested that the user refer to the reference guide for directions on how to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

The replacement screw seen here is made from high-quality, durable metal. It is an identical replacement for a faulty screw in many types of lawn and garden equipment. The screw features a hex-bolt shaped head and is used for various applications in the machines. Owners will want to refer to diagrams of their model to ensure the correct application for the screw. A screw may need to be replaced for any number of different reasons. In some cases, the screw could become lost when making other repairs to the machine. It could also become bent or the threads could be damaged. Corrosion is also a possibility over time. Replacing the screw is typically considered a fast and easy repair. The screw is a genuine OEM replacement part that is sold individually. The screw can be used for many models of snowblower, lawnmower, chainsaw, tiller, string trimmer, log splitter, edger, and wood chipper. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.