664Vg6mxba Parts

This front drawer panel restores the cabinet-facing surface of the appliance drawer for a clean, finished appearance and proper fit. It replaces a scratched, dented, or damaged panel to improve looks and usability. What it does:

• Replaces the front exterior panel on the appliance drawer for a restored appearance
• Covers and protects the drawer front from further dents, scratches, and wear
• Helps ensure drawer closes and aligns with surrounding cabinetry
• Useful when original panel is cracked, bent, or cosmetically damaged

• Intended for repair techs or experienced DIYers; refer to OEM instructions for proper removal and reattachment
• Disconnect power and empty the drawer before beginning work
• Use care to avoid scratching the new panel during installation; handle with protective gloves
• Reuse existing screws/clips or order separately

This electronic control board powers and manages the oven/dryer/washer console, providing the interface and timing/logic functions that run cycles and display status. Replaces a faulty board to restore normal control operation. What it does

• Receives user inputs from the console and sends commands to the appliance's motors, valves, heaters, and indicators.
• Manages cycle timing, start/stop functions, and display readouts.
• Common symptoms: unresponsive touchpad/buttons, blank or frozen display, error codes related to control failure, or inability to start cycles.
• Matches OEM board function and electrical connections for direct replacement when listed for your model.

• One electronic control board

• Disconnect power (unplug or breaker) before accessing internal panels to avoid shock or damage.
• Handle the board by its edges and avoid static discharge; use anti-static protection if available.
• Compare connectors and mounting points to the original board before installing.

This wire harness supplies factory-style wiring and connector plugs to restore proper electrical connections between a range or dryer's controls and components. It replaces a damaged or corroded harness to help restore reliable operation. What it does

• Routes power and signal connections between the control board and components.
• Replaces frayed, burnt, or broken wires that can cause intermittent or no operation.
• Helps resolve symptoms like lights or controls not responding, cycles not starting, or inconsistent component function.
• Uses OEM-style terminals and connectors to match factory hookups.

• Disconnect all power (unplug appliance or switch off breaker) before starting work.
• Compare connectors and wire colors to the original harness to ensure correct routing.
• Avoid pulling on wires; disconnect and reconnect by the housings to prevent terminal damage.

This front mounting bracket secures the appliance's front panel and helps keep the cabinet and components aligned for stable operation. A direct-fit replacement that restores proper panel fit and reduces vibration or rattling. What it does

• Secures the front panel or trim to the cabinet to maintain alignment and prevent gaps.
• Keeps adjacent components from shifting, helping reduce vibration and noise.
• Commonly replaces cracked, bent, or missing brackets that cause loose or misaligned panels.
• Helps restore correct door/panel fit and smooth operation of attached controls or trim.

• One front mounting bracket

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the front panel or trim—keep screws and fasteners organized.
• Inspect mating surfaces and existing fasteners; replace any damaged screws or clips.

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

This orifice spud is the small gas fitting that directs fuel from the range/oven valve to the burner, helping maintain the correct gas flow for stable ignition and consistent flame control. What it does

• Seats in the gas valve or burner assembly to channel gas through the proper orifice
• Restores correct fuel flow when a damaged or clogged spud causes weak or no flame
• Helps correct symptoms like burners that won't light, low or uneven flame, or inconsistent cooking heat
• Works with the existing valve and burner components to re-establish reliable ignition

• One orifice spud

• Turn off the appliance gas supply and disconnect power before starting any work
• Remove grates and burner parts to access the valve/burner area; keep parts organized for reassembly
• Tighten to OEM torque; do not force fittings or overtighten threads

This door hinge assembly secures and guides the appliance door for reliable opening and closing, restoring proper alignment and smooth operation. Replace a worn or damaged hinge to stop sagging or uneven door movement. What it does:

• Re-establishes proper door alignment so the door seals and closes correctly
• Supports the door weight and provides a pivot point for opening and closing
• Helps eliminate sagging, rubbing, or uneven gaps around the door
• Works with the appliance's existing mounting points and fasteners

• One door hinge assembly

• Follow the appliance manufacturer's service manual for safe removal and installation
• Disconnect power (and water, if applicable) before servicing to avoid shock or other hazards
• Use proper tools and keep fasteners organized; some adjustments may be required for final alignment

This wire harness connects the appliance's control and electrical components to restore reliable power and signal routing. It replaces damaged or worn wiring to help stop intermittent power, controls not responding, or component failures. What it does

• Routes power and control signals between the control board and components
• Replaces frayed, broken, or burnt wiring that can cause intermittent operation
• Helps resolve symptoms such as no power to parts, unresponsive controls, or erratic component behavior
• Provides factory-style connectors for a direct-fit electrical connection

• One wire harness as shown

• Disconnect all power (unplug or shut off breaker) before beginning work
• Take photos of the original harness routing and connector positions to aid reassembly
• Route the harness without sharp bends or pinches and secure with existing clips or ties

This Grate Kit replaces worn or damaged cooktop grates to restore a stable, level surface for cookware and improve burner performance. Designed for use on compatible gas ranges to keep pots and pans steady during cooking. What it does:

• Supports cookware over burners for safe, even heating
• Replaces chipped, cracked, or misshapen grates that cause wobbling
• Helps maintain proper burner flame pattern by keeping cookware positioned correctly
• Restores the cooktop's finished appearance when grates are corroded or stained

• Allow the cooktop to cool completely and turn off gas supply before replacing grates
• Lift out the old grate(s) and set the new grate(s) into position, making sure they sit level and align with burner caps
• Handle cast-iron grates carefully—use gloves to avoid pinching or dropping
• After installation, check that burners light and flames are steady; readjust grate position if needed

This left-side slide drawer replaces a worn or damaged refrigerator drawer slide to restore smooth, stable opening and reliable support for the drawer. Designed to match the OEM fit and function for compatible Whirlpool refrigerators. What it does:

• Guides and supports the left refrigerator drawer for even, smooth movement.
• Replaces bent, broken or worn left-side slide assemblies to stop sagging or sticking.
• Reduces rubbing, scraping or catching when opening and closing the drawer.
• Helps restore proper drawer alignment and prevents uneven wear on the drawer edge.

• Disconnect power to the appliance before beginning repairs and remove food/items from the drawer.
• Remove the old slide per the freezer/refrigerator drawer removal steps; retain fasteners if re-using.
• Align the new slide with mounting points and secure with recommended screws; avoid over-tightening.
• Test drawer movement and adjust alignment as needed; stop and reassess if binding occurs.