664Vg6mxba Parts

The Gas Valve is an OEM part for Whirlpool gas ranges. Located behind each burner knob along the control panel, it regulates the flow of fuel to individual cooktop burners enabling customized heat levels.  

Causes of a bad gas valve are typically mineral deposits accumulating within the valve internals over extended use, impairing proper gas regulation. Physical impacts that damage fragile internal mechanisms can also lead to malfunctions.

Symptoms of a failed gas valve include:

• Inability to toggle burners between low and high flame settings  
• Burners igniting intermittently or remaining constantly on
• Gas smell detected near range installation area
• Visible corrosion and scale buildup externally on the valve

 Compatible models also include those by Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and Kenmore. 

This is a genuine replacement spacer that positions and supports internal components to maintain proper alignment and reduce wear. Restores correct spacing to help appliances run smoothly and quietly. What it does:

• Maintains correct clearance between mating parts to prevent rubbing and excessive wear
• Helps stabilize assemblies to reduce vibration and noise during operation
• Keeps components aligned so mechanisms engage reliably
• Can prevent premature failure of nearby seals, bearings, or motors when installed correctly

• Disconnect power (and water if applicable) before starting any repair
• Handle small parts carefully; use basic hand tools and avoid over-tightening fasteners

This burner valve controls gas flow to a surface burner, restoring proper ignition and flame regulation when the original valve fails. Ideal for replacing a worn or malfunctioning surface gas valve to regain reliable cooktop performance. What it does:

• Regulates gas flow from the supply line to a single surface burner for ignition and flame control.
• Replaces a valve that is sticking, broken, or no longer allowing consistent gas flow.
• Helps address symptoms such as a burner that won't light, a weak or uneven flame, or loss of burner control.
• Works as the direct replacement component that mounts behind the cooktop and connects to the burner orifices.

• One burner valve

• Turn off the appliance power and shut off the gas supply before starting any work.
• Installation typically requires removing the cooktop/top panel and disconnecting gas fittings—use proper tools and thread sealant approved for gas.
• Perform a gas-leak check after installation and before returning the appliance to service.

The Burner Valve is an OEM part for Whirlpool gas ranges. Located beneath each surface burner grate, it enables the control of gas flow to each cooking element allowing customized heat levels.

Symptoms of a bad burner valve include:

• Inability to adjust burner flames between simmer and boil  
• Surface flames not igniting or extinguishing unexpectedly
• Discolored or misshapen valve bodies indicating internal damage
• Gas leaks detected around valve mounting connections

Causes of valve failure are typically due to wear over extended use or mineral scale accumulation in the valve orifice restricting precise regulation. Physical impacts may also crack the componentry. 

This authentic Whirlpool replacement valve is compatible with select models including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas ranges. 

This venturi is the shaped gas flow tube that helps meter and direct gas into the burner for proper combustion. Replacing a worn or damaged venturi restores consistent flame performance and efficient heating. What it does:

• Channels and accelerates incoming gas so the burner can mix gas and air correctly
• Helps maintain a stable, even flame for reliable heating
• Can cause weak or uneven heating, delayed ignition, or poor burner performance when clogged or damaged
• Works as part of the burner assembly to support safe, efficient operation

• Turn off power and shut off the gas supply before servicing
• Inspect surrounding burners and seals; replace any damaged gaskets or hardware
• Install in the original orientation and hand-tighten hardware, then test for proper operation
• After installation, check for gas leaks and correct flame characteristics before regular use

This electronic control board replaces the main console control used to operate the oven/range and manage user inputs and timed functions. Restores control of the oven's settings and display when the original board fails. What it does:

• Receives keypad/knob inputs and sends commands to oven elements, indicators, and timed cycles
• Helps regulate bake/broil cycles and timed functions so settings respond correctly
• Commonly replaces a board that causes no display, unresponsive controls, or erratic cycles
• Works as the primary logic/control module coordinating oven functions

• One electronic control board (main console), exact OEM configuration as shown

• Disconnect power at the breaker before uninstalling or installing to avoid shock
• Handle the board carefully; avoid touching circuit traces and use anti-static precautions if possible
• Verify all wiring connectors seat fully and mounting screws are secure before restoring power

The Burner Valve is an OEM part for Whirlpool ranges. It is responsible for controlling the flow of gas to the surface burners for precise heat regulation during cooking.

A bad surface burner valve can occur due to wear and tear, clogs, or damage to the valve mechanism. If you notice symptoms such as difficulty in igniting the burner, uneven flames, or gas leaks, it may be time to replace the surface burner valve.

Symptoms of a bad surface burner valve include:

• Difficulty in igniting the burner
• Uneven flames or inconsistent heat
• Gas leaks around the valve area

Repair your range by replacing the faulty or worn-out surface burner valve with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This manifold assembly routes gas to the cooktop's four burners so the range heats correctly. Replaces a damaged or leaking manifold to restore consistent burner ignition and flame delivery. What it does:

• Directs and distributes gas to each of the four cooktop burner valves
• Enables proper burner ignition and consistent flame at all four burners
• Helps stop gas leaks or uneven burner performance when the manifold is cracked or damaged
• Works with the range's valve and orifice system to maintain safe operation

• Manifold assembly (1)

• Turn off gas supply and power to the appliance before starting work
• Only install on compatible models and use proper gaskets/seals where required
• Tighten fittings to manufacturer torque specifications and check for leaks with a soap solution or approved leak detector