665 13402N411 Parts

This replacement door handle restores a secure, comfortable grip so you can open and close the appliance door with confidence. Replacing a worn or broken handle improves usability and refreshes the appliance's appearance.

• Provides a sturdy handhold to operate the door smoothly
• Replaces cracked, loose, or missing handles
• Helps resolve difficulty opening the door due to a damaged handle
• Restores the finished look of the appliance front

• Disconnect power before servicing; allow surfaces to cool if recently used
• Support the door/outer panel when removing or reinstalling fasteners
• Access and remove the interior mounting screws, then transfer the handle
• Tighten fasteners evenly; do not overtighten to avoid stripping threads

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

This inner door panel replaces the damaged or worn interior panel on the appliance door to restore appearance and support proper sealing and operation. It helps stop drafts, heat or moisture loss, and prevents debris from entering the door cavity. What it does:

• Replaces a cracked, dented, or warped inner door panel that affects door fit and appearance
• Restores the inner surface that supports insulation and inner door components
• Helps reduce heat, steam, or moisture transfer through the door
• Can stop rattling or gaps caused by a loose or damaged inner panel

• One inner door panel as shown

• High-level replacement: remove the outer door panel and any trim to access and swap the inner panel
• Handle edges and fasteners carefully to avoid scratching the door finish
• Unplug the appliance or disconnect power before beginning work to prevent electrical hazards

This control panel is the console assembly that houses the user controls and display, restoring full interface function and reliable selection of cycles and options on compatible Whirlpool laundry units. What it does

• Replaces the main user interface so buttons, touch controls, and the display respond correctly.
• Restores cycle selection, start/pause, and option controls when the original console is faulty.
• Common symptoms it fixes: unresponsive buttons, blank or flickering display, incorrect or no input response.
• Also replaces consoles damaged by cracks, wear, or moisture that affect operation.

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle display and ribbon cable connectors carefully to avoid damage.
• Removal typically requires access to the washer/dryer front console and simple hand tools.

This access panel provides a fitted cover that protects internal components while allowing service access when removed. It restores the appliance's exterior appearance and keeps wiring and parts safely enclosed. What it does:

• Covers and protects controls, wiring, and service areas from dust and accidental contact
• Provides removable access for diagnostics and repairs without damaging surrounding trim
• Helps maintain proper airflow and finish around the service area
• Reduces visible gaps and improves the appliance's exterior look

• Disconnect power to the appliance before removing or installing the panel
• Use the original screws or mounting hardware to secure the panel; do not force or bend metal
• Handle edges carefully to avoid cuts; wear gloves if needed

This replacement wire restores an electrical connection between components to help re-establish reliable power and operation. It's a simple, direct replacement when a damaged or broken wire causes loss of function. What it does:

• Provides a proper electrical path for a specific circuit or component
• Replaces frayed, cut, or burned wiring that can cause intermittent or failed operation
• Helps prevent arcing or poor contacts when the original wire is compromised
• Used where the OEM harness or wiring needs a single-wire replacement

• One replacement wire

• Turn off power to the appliance at the breaker or unplug before servicing
• Inspect surrounding wiring and connectors; replace damaged harnesses or connectors as needed
• Use proper connectors and secure routing to avoid pinching or abrasion

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This UI housing is the outer shell that supports and protects the appliance control panel, keeping the buttons and display securely mounted and shielded from moisture and debris. It restores a clean, stable control area. What it does:

• Provides a mounting surface and protective cover for the user interface and control electronics
• Prevents exposure of wiring and switches to spills, dust, and physical damage
• Restores proper alignment for buttons and knobs when the console is cracked or warped
• Helps eliminate loose or rattling controls caused by a damaged housing

• One UI/control panel housing

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Remove screws and fasteners from the console; keep hardware for reuse if not replacing
• Handle the control board and ribbon cables carefully to avoid damage; disconnect connectors gently

This cap is a small protective cover designed to secure and seal a component opening on your appliance, keeping contaminants out and helping the assembly operate as intended. It's a simple replaceable part that restores proper fit and protection. What it does:

• Covers and seals a component opening to block dirt, lint, and moisture.
• Helps maintain proper alignment and retention of the underlying fitting or assembly.
• Common symptom: cracked, broken or missing caps can allow debris in or cause rattling.
• Common symptom: a worn or loose cap may fail to seat, reducing protection of the component.

• One cap as pictured

• Disconnect power and water before starting any work.
• Inspect the mating surface for damage or debris; clean before installing the new cap.
• Press or snap the cap into place until fully seated; do not force or pry.
• If the original cap was secured with clips or screws, retain or reuse them as required.

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This seat support bracket is a genuine MTD part sold individually. This seat support bracket can be used as a replacement part in a lawnmower. The purpose of the seat support bracket in a lawnmower is to manage and bolster the stable placement of the seat such that the seat can raise, lower, and pivot to the desired height and comfort of the operator of the appliance for regular use.If the seat support bracket is punctured, dented, cracked, warped, eroded, or otherwise damaged, it should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This seat support bracket is compatible with the following outdoor appliance brands: MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, and Husky.