665 1367/8 Parts

This silverware basket replaces a cracked, broken, or missing utensil holder to keep forks, knives and spoons organized during the wash cycle. It fits into the dishwasher's lower rack and helps maintain cleaning efficiency. What it does

• Holds and separates silverware and small utensils so water and detergent can reach each piece
• Prevents nesting and keeps items upright for better cleaning and drying
• Secures loose items during the wash to avoid damage to dishes or the dishwasher
• Works with standard lower-rack mounting locations on compatible dishwashers

• One silverware basket

• Installs in the lower dishwasher rack; no tools required for typical replacements
• Position tines or compartments so utensils sit upright and do not block spray arms
• Do not overload the basket; bent or damaged tines may affect fit and function

This replacement brace is a structural support bracket that helps stabilize and secure appliance components for reliable operation. Installing the correct brace restores alignment and reduces movement that can cause noise or wear. What it does

• Provides structural support to internal or external assemblies to keep parts properly aligned
• Helps reduce vibration and rattling caused by loose or damaged supports
• Prevents excess movement that can lead to premature wear of adjacent components
• Commonly replaced when the original bracket is bent, cracked, or missing

• One replacement brace/support bracket

• Use appropriate tools and fasteners for your model; retain any original screws if reusable
• Disconnect power (and water if applicable) before beginning any repair for safety
• Inspect surrounding components and mounting points; replace damaged hardware as needed

This pump and motor assembly circulates and removes water from the dishwasher tub so dishes drain properly. It replaces a worn or failed pump to restore normal draining and help prevent standing water after cycles. What it does:

• Drives water through the drain system so the dishwasher can empty at the end of a cycle
• Commonly replaces units that cause poor or no draining and standing water in the tub
• Can reduce abnormal noise coming from the lower front of the appliance when the pump is failing
• Works with the dishwasher's plumbing to maintain correct water flow during wash and drain steps

• One pump and motor assembly

• Disconnect power to the appliance before beginning any repair
• Access typically requires removal of the lower access panel or toe-kick; support the tub if instructed by your model's service guide
• Inspect and reseat any hoses and clamps; replace damaged gaskets to prevent leaks

This motor-pump assembly replaces the dishwasher's pump and motor that circulate and remove wash water so cleaning cycles run correctly. It restores proper draining and water movement for reliable performance. What it does:

• Circulates wash water through spray arms during the wash and rinse cycles
• Pumps wastewater out of the tub during drain phases
• Commonly used when the dishwasher fails to drain or leaves standing water
• Can resolve loud or grinding noises coming from the bottom of the dishwasher
• Helps prevent cycle failures caused by poor water movement

• Disconnect power to the appliance before attempting any service
• Access from the dishwasher base—support the appliance and follow OEM disassembly steps
• Keep the work area dry; expect some residual water in the tub/hose when removing the pump

This upper rack pivot clip secures the tine/pivot on the dishwasher's upper rack so the rack stays aligned and tracks smoothly. Replace a damaged clip to stop the rack from sagging, tilting, or coming off the track. What it does:

• Secures the upper rack tine/pivot to the rack frame for stable operation
• Keeps the upper rack aligned and prevents tilting or sagging during loading
• Helps the upper rack engage and slide smoothly along the rails
• Common replacement when the rack pops off track, pivots unexpectedly, or tines become loose

• Disconnect power to the appliance before beginning any service
• Remove the upper rack to access the pivot area for easier installation
• Align the clip with the tine/pivot and press or snap into place; reuse original fasteners if present
• Handle rack tines carefully — they can be sharp; test rack movement after installation

This genuine MTD replacement part is a steering wheel for use with lawn tractors and riding mowers. A properly functioning steering wheel is essential for the safe and reliable use of a lawn tractor or riding mower. The steering wheel turns the vehicle and allows for safe maneuvering.The steering wheel may become worn out or damaged with extended use, necessitating replacement. Remember to check the steering wheel periodically to spot any wear or damage. This part is an identical replacement for a steering wheel that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with Craftsman, Husky, MTD, Troy-Bilt, and more lawn tractors and riding mowers. Please note: original part numbers 631-04008 and 631-04008A are now obsolete, and manufacturer has replaced the original part number with this part.

This hex screw is a genuine MTD part, sold individually. A hex screw can be used as a replacement part for outdoor appliances including lawn mowers, snowblowers, tillers, and wood chippers. This genuine OEM part is a small fastening component.The hex screw in a outdoor appliance might need to be replaced if it has been lost or damaged. If the screw has been damaged and cannot serve its typical function, it should be removed and replaced by this genuine OEM replacement part in a timely fashion.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, Huskee, Montgomery Wards, Yard Man, and MasterCut.