665 1367/8 Parts

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This UI housing is the outer shell that supports and protects the appliance control panel, keeping the buttons and display securely mounted and shielded from moisture and debris. It restores a clean, stable control area. What it does:

• Provides a mounting surface and protective cover for the user interface and control electronics
• Prevents exposure of wiring and switches to spills, dust, and physical damage
• Restores proper alignment for buttons and knobs when the console is cracked or warped
• Helps eliminate loose or rattling controls caused by a damaged housing

• One UI/control panel housing

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Remove screws and fasteners from the console; keep hardware for reuse if not replacing
• Handle the control board and ribbon cables carefully to avoid damage; disconnect connectors gently

This cap is a small protective cover designed to secure and seal a component opening on your appliance, keeping contaminants out and helping the assembly operate as intended. It's a simple replaceable part that restores proper fit and protection. What it does:

• Covers and seals a component opening to block dirt, lint, and moisture.
• Helps maintain proper alignment and retention of the underlying fitting or assembly.
• Common symptom: cracked, broken or missing caps can allow debris in or cause rattling.
• Common symptom: a worn or loose cap may fail to seat, reducing protection of the component.

• One cap as pictured

• Disconnect power and water before starting any work.
• Inspect the mating surface for damage or debris; clean before installing the new cap.
• Press or snap the cap into place until fully seated; do not force or pry.
• If the original cap was secured with clips or screws, retain or reuse them as required.

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This center basket lid secures the top of the washer basket and helps keep laundry contained during the wash and spin cycles. It replaces a cracked or missing lid to restore proper operation and reduce fabric snags. What it does:

• Covers the center of the tub/basket to keep clothes from catching on the agitator or basket edge
• Helps maintain balanced load containment during agitation and spinning
• Prevents small items from falling into the basket gap or drain area
• Restores the washer's intended interior protection and appearance

• One center basket lid

• Disconnect power and water supply before starting any repair
• Remove the dispenser/console or top panel only if required by your model; follow factory service instructions
• Handle replacement parts carefully to avoid scratching the tub or lid finish

This shift knob is a genuine MTD part, sold individually. A shift knob can be used as a replacement part in a lawn mower or a tiller. This genuine OEM part is made out of high quality, durable metal material that is built to last for the typical lifespan of the appliance.The shift knob in a lawn mower or a tiller might need to be replaced if it ceases to perform its central function for the appliance. This could occur if the shift knob has suffered damage from general wear and tear over long-term usage or as the result of a direct impact collision with a hard object, such as a rock or a curb.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This shift knob is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This seat pivot bracket is a genuine MTD part, sold individually. This seat pivot bracket can be used as a replacement part in a lawn mower. The purpose of the seat pivot bracket is to allow the seat to be set to various adjustments for the comfort of the operator while the appliance is in use.The seat pivot bracket in a lawn mower might have to be replaced if it can no longer be used to adjust the angle of the seat of the appliance. The seat pivot bracket could be dented, cracked, punctured, warped, or eroded to the point that its functionality is reduced or negated, and if this occurs, the seat pivot bracket should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This seat pivot bracket is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Murray, Yard Machines, Yard Man, Huskee, Bolens, and MasterCut.

This genuine OEM replacement bracket stop seat is for riding lawn mowers or tractors. The part is located underneath the seat on riding mowers or tractors. Its purpose is to provide a safety shut off function when the rider leaves the seat while the blade is engaged. Over time, constant use of the mower can cause wear on the bracket, requiring it to be replaced. If a mower is left in the elements over an extended period of time, the bracket could rust. This would require the bracket to need replacing. Failure to replace a worn or rusted bracket stop seat could cause potential safety hazards as the engine may to fail to shut off if the rider should leave the seat while the blade is engaged. Replacing a bracket stop seat requires a screwdriver to replace. It is a fairly easy repair that should take under 30 minutes to complete. This part serves as a replacement if needed for the original bracket stop seat. This bracket is compatible with Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Husky, Montgomery Wards, Bolens, Yard-Man, and Ryobi brands. This bracket is sourced directly from the manufacturer and is sold individually.

This drag link is a genuine MTD part, sold individually. This drag link can be used as a replacement part in a lawnmower. The purpose of a drag link, also known as a steering arm, in a lawnmower is to affix the steering wheel and the shaft to the front tires of the appliance for ease in steering the lawnmower while in operation.The drag link in a lawnmower might need to be replaced at some point within the typical lifespan of the appliance; this can occur if the lawnmower is difficult to steer in a way that is directly attributable to the drag link, which could be due to damage to the component. Damage can take the form of puncturing, warping, denting, cracking, or eroding, and if the damage precludes the function of the drag link, the drag link should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This drag link is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Machines.