665 72014101 Parts

The sealed ball bearings are used as a means to limit the amount of friction that occurs between a fixed part of the assembly and a rotating shaft. They can be used for numerous applications in lawn and garden equipment. The ball bearings are used in various locations of different types of machines, so the issues that could crop up will vary. Typically, bad ball bearings will create knocking sounds in the engine, or parts in the engine could be difficult to turn. When the ball bearings are no longer sealed or not functioning properly, they should be replaced. This genuine OEM replacement ball bearing is sold individually. The ball bearing works with many models of lawn mowers, snowblowers, edgers, wood chippers, and tillers. Compatible brands include Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. Buyers should always ensure they are buying the correct parts for their make and model.

This is an authentic OEM replacement flange bearing sourced directly from the manufacturer that is a component in many different lawn and garden machines. The flange bearing is used to tightly fit between two connected components. This connection creates an airtight seal. Over time and with normal wear and tear, the flange can become worn and lose the seal. When this happens, the flange will need to be replaced. The flange helps to distribute the weight load in some instances and if it is damaged, the weight would be displaced and could lead to serious energy.Replacement depends on the location of the flange that needs to be replaced. Place the equipment on a flat surface and disconnect the spark plug wire. Take the machine's components off as needed to access the flange and remove it using a pair of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Reassemble the machine using a reverse process.This flange is a heavy-duty part that is sold as an individual item. The flange bearing can be used with lawnmowers and other lawn and garden machines manufactured by Craftsman.

This part is a replacement choke control cable. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken choke control cable in lawn tractors.The choke control cable enables a better mix of fuel and air, which can make it easier to cold-start the lawn tractor. This part is essential for proper equipment functionality and should be replaced if faulty or defective in any way. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular choke control cable, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This choke control cable can be used with a variety of lawn tractor models manufactured by MTD, Craftsman, and other brands.

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part in a lawn mower. The purpose of the spacer in a lawn mower is to serve as a fastening component that is put between one or more components in order to keep them apart from one another, which serves the function of reducing friction between those components while the appliance is in use.The spacer in a lawn mower is a small component that can be very easily lost or misplaced during typical use of the appliance; if the spacer is lost, the user of the appliance might not necessarily notice its absence right away, as its absence will not alter the functionality of the appliance. But if the spacer is missing, it should be replaced as soon as possible in order to guarantee the safekeeping of the components into which the spacer is integrated.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This spacer is compatible with the following outdoor appliance brands: MTD, Yard Machines, Huskee, and Yard Man.

The muffler on lawnmowers prevents neighbors from becoming overly upset when the grass is cut early in the morning. When the engine starts on the lawnmower, the combustion releases burnt gas, making a very loud noise. The muffler dissipates the noise to make the lawnmower run more quietly. Over time, heat from the exhaust and constant exposure to the elements may cause the muffler to rust and possibly have holes that increase the noise. If this happens, the muffler should be removed and replaced to keep the noise to a minimum. Wait for the engine to cool so that the muffler is cool to the touch. Wear work gloves and have a socket set and adjustable wrench available. Remove the muffler screws and set them aside to use on the new muffler. Remove the damaged muffler from the mounting bracket. Install the new muffler on the mounting bracket using the mounting screws from the old muffler. Tighten the screws and start the lawnmower to ensure the muffler is installed correctly. This muffler is a silver metal part that is sold as one unit. It does not come with attachment screws. It is designed for use on lawn mowers manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard Man, Troy-Bilt, and Husky.

This muffler is a genuine OEM replacement part sourced directly from the manufacturer for use on lawn and garden equipment. It reduces the noise coming from the exhaust. Being a metal part exposed to the elements, it is not uncommon for mufflers to corrode over time and need replacement. As a lawnmower part, the muffler may sustain damage from debris in the yard while mowing. In either case, the muffler should be removed and replaced to keep the noise level to a minimum.The engine and damaged muffler should be cool to the touch before repairing the lawnmower. Wear work gloves and safety goggles. Remove the spark plug from the lawnmower for extra safety. Locate the bolts securing the muffler to the lawnmower and loosen them to remove the muffler. Dispose of the old muffler and align the new muffler with the bolts. Attach the new muffler and tighten the nuts. Put the spark plug back in the lawnmower. This muffler is a high-quality metal part that is individually sold. It does not come with hardware. It is designed for use on lawn mowers and lawn tractors manufactured by MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Poulan, and Husky.

The variable speed belt goes around the engine pulley and the variable speed pulley. It is used on machines that have variable speed pulley drives and that need to be able to operate at different speeds. hese belts will wear down over time and need to be replaced. If the belt breaks, stretches too much or is worn down, replace it with a v-belt that fits properly. A screwdriver, pliers, socket set, and a wrench set will be needed to replace the belt. This is a genuine OEM part for lawn tractors, as well as other types of equipment with variable speeds, such as a snowblower, tiller, wood chipper, or log splitter. It is sold individually, and it will work on lawn tractors from many brands, including Ryobi, MTD, Craftsman, Yard Machines, Yard-Man, Turf King, and Mastercut.