790497113604 Parts

This replacement tension spring restores proper tension to the appliance's moving mechanism so doors, latches or linkages operate smoothly and reliably. It's a simple wearable part that helps fix sagging or loose motion. What it does:

• Provides tension for a door, latch or linkage to return to the correct position
• Helps stop door sag, uneven closing or loose movement
• Eliminates slack that can cause rattling or noisy operation
• Restores proper alignment so mechanical interlocks engage

• One tension spring

• Disconnect power and/or supply (unplug or shut off circuit) before starting
• Release stored tension carefully—use proper tools and eye protection
• Inspect mating parts (pins, clips, brackets) and replace if worn

This replacement lever restores a broken or worn lever used to operate the appliance mechanism, letting the related door, latch or control arm move and function properly. It's a direct-fit stamped/plastic lever designed for OEM fit and durable operation. What it does:

• Replaces a cracked, bent or missing lever to restore proper mechanical movement
• Helps re-engage door/latch or control linkage so the appliance can open, close or actuate normally
• Stops grinding, slipping or loose motion caused by a damaged lever
• Fits the original mounting points for straightforward replacement

• One replacement lever

• Install only after unplugging the appliance or switching off power at the breaker
• Verify correct orientation and engage any retaining clips or fasteners fully before testing
• Use basic hand tools; avoid over-tightening fasteners to prevent cracking the lever

This replacement cam helps position and guide the appliance door or control linkage for correct latch engagement and smoother operation. Fits where a small plastic/metal cam locates moving parts and transfers motion. What it does:

• Rotates or rocks with the hinge or actuator to engage the door latch or control lever
• Restores proper door alignment and latch engagement when the original cam is worn or broken
• Can reduce sticking, binding, or clicking noises at the hinge or latch area
• Commonly replaced when the door won't stay closed, is misaligned, or moves unevenly

• One cam (5304480641)

• Disconnect power before servicing and follow all safety precautions
• Access may require removing the door, trim, or control panel depending on model
• Inspect mating parts (hinge, latch, fasteners) for wear and replace if damaged
• Use correct fasteners and orientation; test operation before full reassembly

This push-button door switch detects when a refrigerator or freezer door opens and closes so interior lights and fans operate correctly, helping maintain visibility and normal cooling function. What it does

• Sends an open/closed signal to control the interior light and fan when the door moves
• Commonly replaces a worn or stuck switch that causes lights to stay on or fail to turn on
• Helps prevent unnecessary run time of interior lights that can warm the cabinet
• Works as the user-access point for door-open sensing in compatible Frigidaire appliances

• One push-button door switch

• Disconnect power before starting any repair to avoid shock or damage
• Access and replace the switch from the door or cabinet interior per your model's disassembly steps
• Handle wiring and connectors gently; ensure secure connections before restoring power

A direct-replacement motor assembly that restores the appliance's fan-driven airflow. Replaces a failed fan motor so your appliance can circulate air and maintain proper operation. What it does:

• Spins the fan to provide airflow for cooling, ventilation, or heat distribution
• Stops abnormal noises related to a failing motor
• Helps restore normal temperature regulation and airflow when the fan has stopped running
• Addresses intermittent operation or no-run conditions caused by a worn or failed motor

• Disconnect power to the appliance before starting any repair
• Handle the motor and fan blades carefully to avoid damaging wiring or connectors
• Typical install requires removing access panels and mounting screws; retain hardware for reinstallation

Hex washer head ,10-32 x 0.375. Ground

A replacement hex-head screw used to secure appliance regulator brackets and similar small components. Restores proper fastener fit so panels and brackets stay firmly attached. What it does

• Fastens regulator bracket and related sheet-metal components
• Provides a secure threaded connection for components where an 8-18 thread is specified
• Helps eliminate looseness or rattling caused by a missing or damaged screw
• Matches the nickel/chrome finish commonly used on interior mounting locations

• One hex head screw (8-18 x 3/8), nickel finish

• Intended for use where an 8-18 x 3/8 hex screw is specified by the manufacturer
• Tighten to snug; avoid over-torquing which can strip sheet-metal threads
• Turn off power to the appliance before accessing internal components
• If the original screw used a lock washer or threadlocker, replace or reapply as appropriate

This rubber bumper cushions doors and panels to reduce noise, prevent metal-on-metal contact, and protect finishes for smoother, quieter operation. Replace worn or missing bumpers to help restore proper seating and reduce rattling. What it does:

• Absorbs shock between moving parts to prevent bangs and scratches
• Keeps doors and panels aligned for a tighter seal and quieter close
• Reduces vibration and rattling during operation
• Helps protect painted or plated surfaces from wear at contact points

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Typically a push-in or snap-in replacement; press into the original mounting hole until seated
• Inspect nearby bumpers and replace in matched sets if others are cracked or missing

This is a #8 screw, 0.500 inch long, used to secure panels and components in appliances. It provides a correct-fit fastener for repairs where the original #8 x 1/2" screw was required, restoring proper assembly and stability. What it does:

• Fastens trim, panels, brackets and small components where a #8 x 1/2" screw is specified
• Holds parts securely to prevent rattling, gaps or loose panels
• Replaces worn, stripped or missing screws to restore proper fit
• Appropriate for common interior and exterior appliance mounting points

• Use the correct screwdriver (typically Phillips) and avoid over-tightening to prevent strip or damage
• Disconnect power and follow appliance manufacturer safety instructions when accessing internal parts

Specs: 8 - 18 x 0.500

These are replacement countertop mounting screws that secure the appliance to the countertop or cabinet, restoring a stable, flush fit and preventing movement or gaps. Sold as a 2-pack for quick, direct replacement. What it does

• Secures the appliance countertop or trim to the cabinet or counter to keep the unit from shifting.
• Helps eliminate rocking, gaps, or uneven alignment caused by missing or loose mounting screws.
• Restores proper fit and finish where original mounting hardware has been lost or damaged.
• Works with factory mounting points and standard driver heads for straightforward replacement.

• Two countertop mounting screws.

• Use the correct-size driver to avoid stripping the screw head.
• Tighten until snug; avoid over-tightening which can strip threads or damage the cabinet/countertop.
• Keep original brackets and hardware; replace only the missing or damaged screws as needed.

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application

This mounting bracket secures appliance components in place to restore stable operation and alignment. It's a simple, durable replacement that helps prevent loose parts and rattling for safer, quieter performance. What it does:

• Provides structural support for internal components and assemblies
• Holds panels, modules or hardware in correct alignment to prevent movement
• Helps eliminate rattling, vibration noise, or loose-fitting parts
• Restores proper fit where a worn or broken bracket allowed misalignment

• Turn off power to the appliance and unplug before beginning work
• Remove only the panels or fasteners necessary to access the old bracket
• Reuse original fasteners or replace with equivalent-size hardware; tighten securely