790497113604 Parts

This door gasket seals the refrigerator/freezer compartment to keep cold air in and reduce energy loss. It restores a tight door closure so the appliance maintains consistent cooling and runs efficiently. What it does:

• Forms an airtight seal around the refrigerator or freezer door edge to prevent warm air infiltration
• Helps maintain proper internal temperature and reduce frost buildup in the freezer
• Can stop excess running or cycling caused by a leaking door seal
• Fits in the door channel and compresses when the door closes for a secure seal

• One door gasket as shown

• Check the gasket channel and mounting surface for debris or damage before installing
• Warm the gasket to ease installation and ensure proper seating in the channel
• Use common hand tools; heavy force or sharp tools can damage the seal—replace if torn or excessively worn

This Tube Assembly routes water inside the refrigerator to the dispenser and ice-maker, restoring proper water flow and preventing leaks when the original line is damaged. Reliable replacement for delivery and fill connections. What it does:

• Transports water from the inlet to the ice maker/dispenser assembly
• Replaces cracked, kinked, or leaking tubing that causes puddles or low water flow
• Helps restore normal ice production and dispenser operation when the tube is the fault
• Matches OEM routing and connector types for correct fit and seal

• One tube assembly as shown

• Disconnect power and shut off the water supply before starting
• Remove ice maker or access panel as needed to reach routing; follow OEM service instructions
• Inspect fittings and replace any damaged clamps or seals; avoid kinking the new tube
• After installation, turn on water, check for leaks, and run dispenser/ice cycles to confirm proper flow

A genuine replacement refrigerator door handle that restores a secure grip and reliable opening on compatible units. Designed to match the original fit and finish so you can use the door normally again. What it does:

• Replaces a broken, cracked or missing refrigerator door handle
• Provides a solid grip for opening and closing the door smoothly
• Restores proper alignment and appearance of the door front
• Helps prevent further damage from improvised grips or taped-on handles

• One replacement refrigerator door handle

• Basic hand tools typically required; follow the OEM instructions for fastener locations
• Work carefully to avoid scratching the door finish and to retain any mounting clips or screws
• If the handle is near electrical components, unplug the appliance or disconnect power before starting

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

This harness assembly is the appliance wiring connector bundle that carries power and signals between controls and components, restoring proper electrical connections for normal operation. What it does:

• Routes power and control signals between the control board and key components
• Replaces damaged, burned, or loose wiring that can cause intermittent operation
• Helps resolve symptoms like unresponsive controls, failure to start, or component loss of power
• Restores factory wiring layout and connector fit for reliable connections

• Disconnect power before starting; confirm power is off at the breaker
• Compare connectors and wire colors to the old harness before removal
• Route and secure harness to avoid heat or pinch points; use existing clips/mounts

This broiler insert is the oven pan insert that sits under the broiler burner to catch drips and help direct heat for even browning. It restores a stable cooking surface and keeps the broiler area cleaner. What it does:

• Holds food and catches grease and drips during broiling to prevent mess and flare-ups
• Directs heat from the broiler for consistent browning and searing
• Replaces damaged, warped, or corroded inserts that cause uneven cooking
• Helps prevent food from falling into the burner area

• One broiler insert

• Disconnect power to the appliance and allow the oven to cool completely before servicing
• Remove oven racks and slide the old insert out; position the new insert so it seats securely in the broiler cavity
• Wear heat-resistant gloves when testing the broiler after installation and inspect for proper fit before use
• Do not modify the part; use only as designed for the oven broiler assembly

This glass shelf is a direct-fit cabinet shelf assembly that restores stable storage and a clean, easy-to-clean surface inside the appliance. It replaces broken, chipped, or missing shelving to help keep items supported and visible. What it does:

• Provides a sturdy, flat surface for storing food, cookware, or other items inside the appliance
• Replaces cracked, chipped, or shattered glass that can cause instability or safety concerns
• Restores proper spacing and organization when a shelf is missing or damaged
• Makes cleanup easier with a smooth, non-porous surface

• One glass shelf assembly

• Handle carefully; glass can break—wear cut-resistant gloves and eye protection
• Slide into place on existing shelf supports or rails; do not force or bend supports
• Inspect shelf supports and clips for wear; replace damaged hardware before installing glass

A replacement motor assembly that restores the appliance's drive or circulation function and reduces abnormal noise or non-operation. Install to get moving parts turning smoothly and resume normal appliance performance. What it does:

• Powers rotating components to restore drive, fan, or pump movement
• Replaces a failed or noisy motor that causes limited or no operation
• Stops grinding, squealing, or stalling symptoms when the motor is the root cause
• Transfers torque through the original mounting and connector points

• Disconnect power to the appliance before starting any work
• Compare the new motor to the original for mounting, shaft orientation, and electrical connector type
• Reuse original mounting hardware and wiring where appropriate; secure all fasteners and wiring before testing

This is a 10-24 x 1/2 inch machine screw used to secure temperature probes, thermistor brackets, shields and drawer/box components. It provides a simple, reliable fastener for small appliance assemblies. What it does:

• Secures probe or thermistor brackets to the appliance chassis or housing
• Holds shielding or small drawer/box parts in place to prevent movement or rattling
• Helps maintain correct sensor positioning so temperature readings stay stable
• Common replacement when a stripped, corroded, or missing screw causes loose parts or vibration

• One 10-24 x 1/2 in. screw

• Use the matching 10-24 threaded hole; avoid over-tightening to prevent stripping or cracking nearby plastic
• If replacing a corroded screw, inspect mating threads and components for damage before reuse
• Turn off and unplug the appliance or disconnect power before accessing internal components

This replacement shield protects internal appliance components from heat, debris and accidental contact, helping maintain safe operation. It provides a direct-fit replacement designed to restore the original protection and component routing. What it does:

• Covers and shields electrical or mechanical parts from debris and accidental contact
• Helps direct airflow or heat away from sensitive components where applicable
• Restores the original barrier that prevents rubbing, chafing, or exposure of wiring and connectors
• Reduces risk of damage that can cause noise, shorts, or premature wear

• One replacement shield

• Disconnect power to the appliance before beginning any work
• Installation typically requires removal of outer panels; keep fasteners organized
• Use appropriate tools and protective gloves to avoid sharp edges
• Refer to the appliance service manual or OEM instructions for exact placement and fastening