7908037 Parts

This mounting nut kit secures a threaded connection or component inside your appliance, keeping it tight and stable during operation. Replacing a worn or stripped nut restores a solid hold and helps prevent leaks, rattling, and poor performance. What it does:

• Fastens a component or fitting to its mating surface, maintaining proper alignment
• Restores grip when original threads are stripped, cracked, or worn
• Helps prevent vibration-related loosening during cycles
• Can resolve symptoms such as a loose/wobbly assembly, rattling noises, seepage at the joint, or visible thread damage

• One mounting nut kit

• Disconnect power; shut off water supply if the joint carries water
• Support the mating component while installing to avoid strain on plastic parts
• Start threads by hand to prevent cross-threading; tighten only until snug—do not overtighten
• Inspect any related gasket/O-ring and replace if worn or damaged

This thermostat is a temperature-sensitive switch used in select appliances to regulate heat or provide over-temperature protection. Replacing a failed thermostat restores consistent temperature control and helps protect internal components from heat-related damage.

• Monitors temperature at its mounting point and opens/closes the circuit at a factory-set threshold
• Regulates heating cycles or functions as a high-limit safety cutoff (application-dependent)
• Failure open can cause no heat or premature shutdown
• Failure stuck closed can lead to overheating, erratic temperatures, or extended run times

• Disconnect power and allow the appliance to cool before servicing
• Note wire locations; transfer one lead at a time to the new thermostat
• Mount flush and secure to the mating surface/bracket for accurate sensing; ensure firm terminal connections
• After installation, run and observe an initial cycle to confirm normal operation

The Glass Turntable Plate is an OEM part for Frigidaire microwaves. As the surface food rests upon during cooking, it features heat-resistant tempered glass construction suitable for high-power microwave usage. 

Causes of damage can include cracking or splitting from thermal shock of sudden temperature changes during repeated heating and cooling cycles. Improper cleaning methods using harsh chemicals may also degrade protective coatings.

Symptoms of a faulty glass plate involve: 

• Cracks or chips exposing sharp edges presenting a hazard
• Denting or warping preventing level rotation inside the cavity
• Staining or clouding compromising visibility of cooking foods

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

This replacement lamp restores clear, reliable lighting so you can see food and monitor cooking at a glance. Install a new bulb when the original is burned out, flickers, or the glass capsule is darkened or damaged.

• Provides illumination for the appliance interior or work area, depending on model
• Typical symptoms: no light when the door opens or light button is pressed
• Flicker or work intermittently before failing completely
• Visible damage or dark, cloudy glass indicates the bulb has failed

• Disconnect power to the appliance before servicing and allow the lamp area to cool
• Access varies by model; remove the lens/cover or service panel per your unit's documentation
• Handle the bulb by the base; if halogen capsule style, avoid touching the glass
• Replace only with the lamp type and wattage specified for your model

The Glass turntable Tray Support is an OEM replacement part for Frigidaire microwaves. It provides stable placement for the microwave's rotating glass turntable. 

Causes of a bad turntable support can include wear from prolonged operation, stress from overfilling or shifting of heavy loads, or damage if the turntable is accidentally dropped or impacted.

Symptoms of a bad turntable support include:

• The turntable not spinning properly or getting stuck during operation
• Vibration or noise coming from the turntable mechanism 
• Difficulty removing or fitting the turntable securely  
• Food not cooking evenly due to an unstable or off-center turntable

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator and Kenmore models.

The Door Trim is an OEM part for Frigidaire microwaves. As an accent piece affixed to the outer door frame, it contributes to the overall appearance and aesthetic of the appliance.

Causes of a damaged door trim can include wear from extended opening and closing loosening adhesive bonds, impact damage detaching perimeter pieces, or discoloration/ cracks affecting its visual appearance over time.

Symptoms of a faulty door trim involve: 

• Gaps or separation from the door frame
• Loose, flaking, or discolored trim sections  
• Protruding edges present risk of cuts or snags

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

This replacement shaft transmits rotation between components within the targeted assembly. It restores proper alignment and smooth motion when the original shaft is worn, bent, or stripped, helping the appliance operate reliably again.

• Transfers rotational force between mating components in the mechanism
• Maintains alignment and support for rotating parts
• Ensures secure engagement with the hub/gear to prevent slipping
• Worn or bent shafts can cause wobbling, grinding noises, slipping, or intermittent operation

• Disconnect power (and water supply if applicable) before servicing
• Access the assembly and note the shaft's orientation and any spacers, clips, or washers
• Transfer any reusable hardware from the old shaft and seat the new shaft fully
• Verify smooth rotation by hand before reassembly and testing

The Magnetron is an OEM part for Frigidaire microwaves. It is responsible for generating the microwave energy that heats and cooks your food quickly and efficiently. It converts electrical energy which is then distributed throughout the microwave cavity.

A bad magnetron can be caused by electrical issues, component failure, or physical damage. Signs of a faulty magnetron include the microwave not heating food properly, unusual noises during operation, or complete failure to produce heat.

Symptoms of a bad magnetron include:

• Microwave not heating 
• Unusual buzzing or humming noises
• Failure to produce heat or power

Replace your defective or damaged microwave magnetron with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Capacitor is an OEM part for Frigidaire microwaves. It is responsible for storing and releasing electrical energy to power the microwave's magnetron, which generates the high-frequency waves needed for cooking.

A bad capacitor can be caused by electrical issues, component failure, or physical damage. Signs of a faulty capacitor include microwave not heating properly, sparking or arcing inside the microwave, or unusual noises during operation.

Symptoms of a bad capacitor include:

• Microwave not heating  
• Sparking or arcing 
• Buzzing or humming sounds

Replace your malfunctioning or damaged capacitor with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This temperature sensor monitors internal fridge/freezer temperature so the control board can regulate cooling and defrost cycles for more consistent temperatures and food safety. What it does

• Measures compartment temperature and sends readings to the control board.
• Helps the refrigerator maintain set temperatures by enabling accurate cooling cycles.
• Supports proper defrost control when used in defrost/evaporator applications.
• A failing sensor can produce temperature fluctuation, poor cooling, or longer run times.

• One temperature sensor

• Disconnect power before servicing to avoid shock or compressor damage.
• Handle the sensor and connector gently; avoid pulling on wires.
• Verify location and routing match the original; secure sensor to prevent contact with moving parts.

This capacitor helps the refrigerator compressor start and run smoothly, restoring reliable motor operation and improving cooling performance when the original capacitor fails. It's a direct-replacement electrical component used on compatible Frigidaire appliances. What it does:

• Supplies the brief electrical boost the compressor motor needs to start
• Supports continuous motor operation to maintain consistent cooling
• Commonly linked to symptoms such as the compressor struggling to start, loud humming, or reduced cooling
• Helps prevent hard starts that can lead to overheating or repeated cycle failures

• One capacitor

• Disconnect power to the appliance before service to avoid electric shock
• Capacitors can hold a charge—discharge safely before touching terminals
• Verify terminal connections match the original and secure all wiring after replacement

This thermostat is the refrigerator temperature control that senses cabinet temperature and cycles cooling to help maintain set temperatures. It replaces a failed control to restore reliable temperature regulation. What it does:

• Senses refrigerator temperature and opens/closes the cooling circuit to maintain the set temperature
• Stops continuous compressor run when the cabinet reaches the set point
• Can cause warm or fluctuating temperatures, or a compressor that won't cycle when faulty
• Works with the control knob/selector to adjust interior temperature

• One thermostat

• Disconnect power before attempting service to avoid shock or compressor damage
• Handle the sensing bulb/capillary gently; avoid kinks or sharp bends
• Installation usually requires access to the control housing inside the cabinet and basic hand tools

This water filter cartridge replaces the refrigerator's inline/slot-style filter to help reduce taste and odor from your drinking and ice water. It restores filtered water flow and helps keep dispensed water clear and fresh. What it does:

• Removes common impurities that affect water taste and odor
• Helps reduce particulates and sediment in dispensed water
• Restores proper filtered water flow when a clogged/expired filter causes slow flow
• Supports clearer, better-tasting ice and drinking water

• One water filter cartridge

• Turn off the water supply and dispense any remaining water before removing the old filter
• Follow the refrigerator manufacturer's push/pull or twist-release procedure for removal and installation
• After installing, flush several quarts of water through the dispenser to clear air and initial carbon fines
• Replace per the refrigerator manufacturer's recommended schedule or when filter performance declines

This screw kit provides the replacement fasteners needed to secure panels and components on compatible Frigidaire appliances, restoring proper fit and reducing vibration or loose parts. Use it to replace missing, damaged, or stripped screws. What it does:

• Replaces stripped, corroded, or missing screws used on appliance panels, brackets, and trim
• Restores secure mounting to stop rattling, gaps, or loose components
• Helps maintain correct alignment of doors, panels, and internal parts after repair
• Provides a range of common screw types to match original fasteners

• Screw kit (assortment of screws as supplied by the manufacturer)

• Turn off power and disconnect the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid further screw damage
• Keep small parts away from children and dispose of damaged fasteners properly