7908037 Parts

This fan blade mounts to the refrigerator fan motor to move air through the appliance for proper cooling and temperature circulation. Replaces a worn or damaged blade to restore airflow and improve cooling efficiency. What it does:

• Spins on the fan motor to circulate air across the evaporator or condenser coils
• Restores proper airflow when a cracked or broken blade causes reduced cooling
• Helps stop vibration or rattling caused by bent or missing blades
• Can reduce motor strain from an imbalanced or damaged blade

• Disconnect power to the appliance before starting any repair
• Remove access panels and fan shroud to reach the blade; keep track of mounting hardware
• Replace carefully to avoid bending the blade; ensure correct orientation on the motor shaft

This evaporator fan assembly circulates cold air through the freezer and refrigerator compartments to help maintain even temperatures and proper cooling. Replaces a worn or failed fan to restore airflow. What it does:

• Spins to move cold air across the evaporator coil and into the appliance interior
• Commonly linked to symptoms like unusual noise, weak cooling, or no airflow in compartments
• Helps prevent frost build-up by maintaining steady airflow over the coil
• Works with the appliance's evaporator motor circuit and fan housing

• One evaporator fan assembly

• Disconnect power to the appliance before beginning any work
• Access may require removing interior panels or the evaporator cover; follow your model's service instructions
• Handle the fan blades and motor carefully to avoid damage; avoid contact with sharp sheet metal and edges
• Test the fan operation after reassembly and restore all panels and fasteners

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This mesh grease filter captures grease and food particles from exhaust air in your over-the-range ventilation system, helping protect the blower and keep the area around your cooktop cleaner. Replace a bent or saturated filter to restore proper airflow. What it does:

• Traps grease and particulates from cooking exhaust
• Helps maintain airflow through the venting system
• Common signs of replacement: torn/warped mesh, broken tabs, heavy grease saturation, or the filter falling out

• 1 mesh grease filter

• Disconnect power before servicing and let surfaces cool
• Wear gloves; filter edges can be sharp
• Access the filter from the bottom, release the latch or tabs, slide out the old filter, and seat the new one securely in the same orientation
• Do not operate the appliance without the grease filter installed

This support is a replacement cabinet mounting support that helps secure and stabilize internal appliance components for proper alignment and operation. Installing a new support restores firm attachment where the old piece is cracked or worn. What it does:

• Provides a secure mounting point to hold internal components or panels in place
• Prevents movement that can cause rattling, misalignment, or improper door/panel fit
• Restores structural support if the original part is cracked, broken, or missing
• Helps maintain correct spacing for connected parts and wiring

• One replacement support

• Disconnect power (and water supply if applicable) before beginning service
• Remove access panels or shelves as needed to reach the damaged support
• Retain original fasteners unless replacement hardware is specified; do not overtighten screws

This front vent grille restores the finished look and airflow path at the appliance front. It replaces damaged or missing grille trim so vents stay covered and the front of the appliance looks complete. What it does

• Covers and protects the appliance front vent opening while directing airflow
• Helps keep debris from entering the vent area and interfering with airflow
• Restores a secure, finished appearance when original grille is cracked, broken or missing
• Reduces rattling or loose trim caused by damaged grille mounting

• One front vent grille

• Disconnect power to the appliance before beginning any work
• Handle the part carefully; edges may be sharp and clips can be fragile
• Typically installs with snap clips or a few screws—use the same fasteners removed from the original
• Secure fit before restoring power

A tempered glass refrigerator shelf that provides a sturdy, easy-to-clean surface for food storage and organization. Designed to replace a damaged or missing shelf and restore usable storage space. What it does:

• Holds food and containers securely on a flat, stable surface
• Restores proper shelf spacing and storage flexibility after breakage
• Resists stains and wipes clean for simple maintenance
• Helps maintain even airflow and organization inside the compartment

• Remove all items from the compartment before installation
• Slide shelf into the support rails or brackets until fully seated and stable
• Handle tempered glass carefully; avoid impacts or dropping during installation
• If supplying shelves with metal trim or clips, verify they are aligned with the cabinet supports

This electronic control assembly manages a range of appliance functions and restores responsive touchpad and cycle control. Replaces a worn or failed main control to help the appliance operate correctly and respond to user inputs. What it does:

• Receives input from the user interface and runs selected cycles and features
• Controls timing, temperature and motor/valve sequences depending on model
• Helps resolve symptoms like unresponsive controls, no display, or erratic cycle behavior
• Works as the main logic board that coordinates appliance functions

• One control assembly

• Disconnect power before attempting service to avoid shock or damage
• Handle the board by its edges and avoid touching electronic components
• Verify connector orientation and seating; secure mounting per original hardware

This door trim frame secures and finishes the appliance door opening, restoring a clean, sealed appearance and proper panel alignment. It replaces a damaged or bent frame to help maintain a snug door fit and proper operation. What it does:

• Provides structural support and edge protection for the appliance door opening
• Helps align and retain the door panel and related trim pieces
• Restores the finished look by covering gaps, dents, or cracked trim
• Can reduce air leakage caused by a warped or damaged frame

• One replacement frame

• Intended for qualified DIYers; verify fit before installation
• Power off and unplug the appliance or shut off circuit power before starting work
• Handle edges carefully — trim parts can have sharp edges
• Follow OEM instructions for removing door panels and fasteners; retain hardware unless new hardware is specified

This support mounting bracket secures and stabilizes a component inside the appliance, restoring proper alignment and reducing noise from loose parts. It's a direct-fit replacement designed to restore reliable function quickly. What it does:

• Secures a panel or internal component to the cabinet to prevent movement and sagging
• Keeps parts aligned to ensure smooth operation and reduce rubbing or vibration noises
• Helps stop intermittent rattling or shifting that can occur during cycles
• Provides a stable mounting point for screws or fasteners used in the assembly

• Disconnect power (or unplug) before starting any repair to avoid shock or injury
• Basic hand tools are typically all that's needed; do not force or bend the bracket during installation
• Tighten screws snugly but avoid over-torquing to prevent stripping or cracking adjacent components.

This replacement part is a control panel assembly manufactured by Frigidaire and is compatible with microwaves.This control panel assembly houses the display as well as the buttons that are used to select the microwave settings. This assembly contains all parts needed to replace the control panel should it become worn or broken in any way. When installing this part, work gloves should be worn to prevent injuries and the appliance should be completely unplugged. This is an authentic OEM part made of high-quality, durable materials and is compatible with various microwave models manufactured by Frigidaire, Electrolux, Gibson, and various other brands. No other components are included with this part.

A replacement frame that restores the refrigerator door opening trim for a secure, finished fit and improved appearance. Replaces a damaged or worn cabinet opening frame to help maintain proper door alignment and seal. What it does:

• Provides the structural trim around the refrigerator door opening and helps hold related seals and components in place
• Restores a finished look when the original frame is dented, cracked, or cosmetically damaged
• Helps maintain proper door alignment that supports effective sealing and temperature control
• Prevents gaps where debris or moisture could collect around the door perimeter

• Disconnect power to the appliance before starting any repair
• Remove door or trim panels as required to access mounting hardware; keep screws and clips for reinstallation
• Align frame carefully and secure with the original fasteners; avoid overtightening to prevent cracking
• If the frame holds a gasket or other parts, confirm proper placement and seal after installation