795-74093-410 Parts

This small retaining clip secures its mating component within the refrigerator assembly, keeping parts properly seated and reducing vibration. Replacing a damaged or missing clip helps restore a snug fit and reliable operation of the attached piece.

• Holds the designated part firmly in place within the assembly
• Maintains proper alignment to prevent movement or rattling
• Helps ensure panels, ducts, or lines stay secured during use
• Symptoms can include loose or sagging parts, vibration noises, or components that won't stay attached

• Disconnect power; if working near the water system, also shut off the water supply
• Note the original orientation and placement before removal
• Fully seat the mating component, then press the new clip into place without forcing
• Check operation before reassembly

This stopper assembly mounts on the appliance door to cushion movement and hold the door in position, reducing wear and preventing slamming for smoother, safer operation. Fits as the OEM door stop used on compatible LG models. What it does:

• Cushions door movement to prevent hard impacts and reduce noise
• Holds the door in the open or closed position to prevent unwanted swings
• Helps maintain door alignment and reduces stress on hinges and latches
• Common symptom: door slams, won't stay open, or bangs against the cabinet

• Disconnect power and water before starting any repair
• Remove the door or open access for safe replacement
• Replacement typically requires basic hand tools (screwdriver or nut driver)
• Inspect surrounding hinge/fastener hardware and replace if worn

This LED assembly restores backlight illumination for compatible LG displays, improving screen brightness and uniformity so images look clearer and easier to see. It replaces a worn or failed backlight strip. What it does:

• Provides the backlight illumination that lights the LCD panel
• Restores overall brightness and reduces dark or dim areas
• Can stop flickering or intermittent light if LEDs are failing
• Helps eliminate uneven lighting or bright/dark bands across the screen

• One LED assembly (single backlight strip) as shown

• Disconnect power and allow capacitors to discharge before starting
• Handle the LED strip and circuit board by the edges; avoid touching LED surfaces and PCB traces
• Keep track of screws and clips; test the display before fully reassembling

This cover cap is a small plastic trim piece that protects exposed fasteners and improves the appliance's appearance. It snaps into place to hide mounting posts and help prevent snags or debris buildup. What it does:

• Covers and protects exposed screws, posts, or fasteners for a finished look
• Prevents lint, dust, and debris from collecting around the mounting point
• Reduces the chance of fabric snags or contact with sharp edges
• Restores worn or missing trim for improved cosmetics

• Disconnect power to the appliance before starting any service that exposes electrical components
• Usually installs by snapping over the post or press-fitting into the trim opening — no special tools required
• If needed, remove adjacent trim pieces to gain access, then reinstall trim in reverse order
• Inspect surrounding mounting hardware for damage and replace if necessary

Note: Left Rail Cap

This lower hinge assembly secures and supports the refrigerator door pivot, restoring proper door alignment and smooth opening/closing. Replace a worn or damaged lower hinge to stop sagging, help seal performance, and reduce rubbing or binding. What it does:

• Provides a stable pivot point for the lower side of the refrigerator door.
• Corrects door sagging or misalignment that can cause poor sealing or uneven gaps.
• Reduces rubbing, scraping, or binding when opening and closing the door.
• Restores proper door operation after impact damage or worn hinge components.

• One lower hinge assembly

• Disconnect power and remove food from the door area before starting; support the door to prevent dropping during removal.
• Keep all original fasteners if they are undamaged; some models may reuse screws or pins.
• Use appropriate tools and take care not to damage the door finish or gasket; wear gloves to protect hands.

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

Sheath heater is the sealed tubular heating element that produces heat for the appliance's heating circuit. Replacing a failed sheath heater restores proper heat output and helps cycles finish on schedule. What it does:

• Converts electrical energy into heat inside a sealed metal sheath to provide the appliance's primary heat source.
• Directly affects heating performance; a faulty sheath heater commonly causes little or no heat or unusually long cycles.
• Open or shorted elements can cause blown fuses, tripped breakers, or trigger thermal cutoffs.
• Visible damage, burn marks, or failed continuity are common signs the element needs replacement.

• Always disconnect power to the appliance before accessing or replacing the heater assembly.
• Test the element for continuity with a multimeter; replace if open or visibly damaged.
• Inspect related safety components (thermal fuse, high-limit thermostat, wiring, connectors) when diagnosing heat issues.
• Follow the appliance service manual for access, mounting, and torque specs.

This TV back cover replaces a damaged or cracked rear cabinet to restore protection and appearance. It shields internal components, helps support internal mounts, and finishes the exterior of the television. What it does:

• Protects internal circuit boards, power supply, and connectors from dust, debris, and impact
• Restores the TV's exterior appearance when the original back panel is cracked, warped, or missing
• Maintains proper spacing for ventilation openings and component placement
• Provides mounting points for internal components and supports rear screw locations

• One TV back cover (rear cabinet) as shown

• Disconnect power and remove all cables before starting; handle the display and circuit boards with care
• Save and reuse any original screws, brackets, or grommets unless replacement hardware is explicitly listed
• Use basic hand tools; avoid over-tightening screws which can crack the plastic

This funnel directs dispensed water or ice from the appliance's dispenser into your cup or container to reduce spills and ensure proper flow. It replaces a worn, cracked, or misaligned chute to restore clean dispensing. What it does:

• Guides water or ice from the dispenser to the user's cup or container
• Prevents drips and reduces splashing at the dispenser opening
• Helps position dispensed items so they clear the dispenser housing
• Addresses symptoms like leaking at the dispenser, uneven flow, or pieces falling inside the dispenser well

• One replacement funnel shown

• Disconnect power and water supply before starting any work
• Remove dispenser or front panel per your model's service instructions to access the funnel
• Align the funnel carefully with the mounting tabs and snap or fasten into place without forcing
• If clips or seals are damaged, replace them to ensure a secure, leak-free fit

This door stopper replaces the small hinge stop that limits door swing and helps the door close and latch properly. It restores correct door alignment and prevents the door from swinging past its intended range. What it does:

• Acts as a mechanical stop on the door hinge to control opening angle and reduce stress on the hinge
• Helps the door close smoothly and remain properly aligned
• Commonly replaces a cracked, worn, or missing stopper that allows over-rotation or uneven closing
• Can reduce noise and wear caused by a loose or shifting door

• Disconnect power to the appliance before servicing to avoid injury
• Replace like-for-like; removal may require removing the hinge trim or screws—keep fasteners organized
• Inspect adjacent hinge components and seals for wear while the door is removed

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

Note: Right Rail Cap 

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This communication link module provides the refrigerator's control board with network and user-interface connectivity so features and diagnostics can be accessed and controlled. It helps restore lost app or panel communication. What it does:

• Handles communication between the refrigerator's control system and external interfaces (user panel, network app).
• Works with the main control electronics to transmit status and diagnostic information.
• Replaces a damaged or non-communicating module that prevents remote control or smart features.

• One link (communication) module.

• Disconnect power to the appliance before replacing this electronic module to avoid shock or damage.
• Handle the module by its edges and avoid touching circuit contacts.
• Installation typically involves removing an access panel and unplugging/reconnecting a wiring harness; keep track of screw and connector locations.