79551839415 Parts

This fan assembly is the rotating blower that moves air through the appliance to support drying, venting, and internal cooling. Replacing a worn fan restores proper airflow and reduces noise or overheating risks. What it does

• Spins the blower wheel to circulate air for drying, venting, or cooling functions.
• Restores airflow when the appliance has weak or no air movement.
• Reduces abnormal rattling, grinding, or humming caused by a damaged motor or wheel.
• Helps prevent overheating by maintaining adequate internal ventilation.

• One fan assembly.

• Disconnect power before starting any repair.
• Access may require removing outer panels or interior trim; keep fasteners organized.
• Handle wiring connectors and harnesses carefully; match connector positions during reassembly.
• Test operation after installation and reassemble panels securely before returning the appliance to service.

This is the main control board (PCB assembly) that manages the appliance's core functions and electronic controls, restoring control and responsiveness when the original board fails. It replaces a faulty main logic/control board to help resolve power and control issues. What it does:

• Controls electronic functions, cycles and user-interface signals for the appliance
• Processes user commands and communicates with sensors and secondary boards
• Common symptom indicators: appliance won't power on, intermittent operation, error codes or blank/erratic display

• One main control board (PCB assembly) as shown

• Disconnect power (unplug or shut off breaker) before attempting service
• Handle the board by the edges and avoid static discharge; use ESD precautions if available

This is a replacement drain tube assembly that directs water from the appliance tub to the drain pump or household drain, helping restore proper water removal and reduce leaks. It's a direct-fit service part used in the drainage system. What it does:

• Channels wastewater away from the tub to the drain pump or drain line
• Helps prevent pooling or slow draining caused by a damaged or disconnected tube
• Restores a sealed path to reduce leaks at the tub-to-pump connection
• Suitable when the original drain tube is cracked, split, collapsed, or leaking

• One drain tube assembly as shown

• Disconnect power and water before beginning any repair to avoid shock or flooding
• Inspect and clean mating surfaces and clamps; replace clamps if corroded or damaged
• Ensure correct routing and secure connections to prevent kinks and leaks

This cap assembly for the duct secures and seals a dryer/exhaust duct connection to restore proper airflow and help prevent leaks. Designed to replace a worn or damaged duct cap and keep the vent path intact. What it does:

• Caps and secures the duct outlet to maintain a tight connection and reduce air leakage
• Helps direct exhaust airflow through the duct instead of escaping at the connection
• Can reduce lint and moisture escaping at a faulty or damaged duct joint
• Commonly replaced when the original cap is cracked, broken, or no longer holds the duct in place

• One cap assembly

• Disconnect and power off the appliance before servicing; follow the manufacturer's service manual
• Basic hand tools typically required; check panel or vent access before starting
• Inspect surrounding duct and fasteners; replace damaged clamps or tape as needed

This water valve assembly controls the flow of water into the appliance, restoring reliable fill and stopping unwanted leaks or no-fill conditions. It's a direct-replacement component designed for easy swap-in repairs. What it does:

• Opens and closes to allow water into the appliance when a cycle or dispenser calls for it
• Restores normal water fill for ice makers, dispensers, or wash cycles
• Stops unwanted or continuous filling caused by a failed valve
• Helps eliminate leaks or dripping when the valve seal is compromised

• Disconnect power and shut off the water supply before beginning work
• Handle electrical connectors and solenoid terminals carefully; replace any damaged wiring or connectors
• After installation, restore power and water, then run a test cycle and check all connections for leaks

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

This condenser assembly is the factory-style replacement condenser wiring and support used in compatible LG refrigerators to restore proper condenser connections and securement. It helps maintain reliable cooling system electrical routing and component support. What it does:

• Provides the correct wire routing and connections for the refrigerator condenser area
• Secures condenser components in place to prevent vibration and wear
• Restores proper electrical paths for condenser-related circuits to help the compressor/fan operate as intended
• Helps address symptoms like intermittent cooling, unusual vibration, or loose wiring in the condenser compartment

• One condenser assembly as shown

• Disconnect power and follow manufacturer safety procedures before starting work
• Inspect surrounding components (fan, compressor mounts, tubing) while replacing this assembly

This door basket is the upper-rack basket assembly that holds small items securely in the dishwasher, helping keep utensils and small dishes positioned for thorough cleaning. It replaces a damaged or worn basket to restore proper loading. What it does:

• Secures small items and utensils in the upper rack so they stay in place during wash cycles
• Prevents items from falling into the lower rack or blocking spray arms, which can reduce cleaning performance
• Replaces cracked, warped, or broken basket sections that no longer support dishes safely
• Helps maintain proper water flow and coverage by keeping load items organized

• One door basket (upper rack)

• Designed to snap or slide into the upper rack;
• Inspect surrounding rack components and track for wear before installing
• Disconnect power and follow basic dishwasher safety procedures if service access requires removing panels
• Use common hand tools;

This replacement lever spring restores tension to a lever-style mechanism so the lever returns and operates reliably. Use it when a worn spring causes the lever to stick, slip, or fail to engage properly. What it does

• Replaces the worn or weakened spring in a lever assembly to restore proper return tension
• Helps prevent the lever from sticking, slipping, or failing to stay engaged
• Restores consistent mechanical movement for reliable operation
• Reduces intermittent or flaky lever behavior caused by a damaged spring

• Disconnect power to the appliance before starting any repair
• Inspect the lever assembly and mounting points; replace only the spring explicitly listed
• Use appropriate hand tools and pliers; avoid overstretching the spring during installation

This motor start/run capacitor helps the appliance motor or compressor start and run more reliably, restoring proper motor performance and reducing symptoms caused by a weak or failed capacitor. What it does:

• Provides the momentary electrical boost motors or compressors need to start
• Helps maintain stable motor operation during run cycles
• Resolves symptoms like motors that hum but won't start, intermittent starting issues, or cycling problems
• Replaces a worn or failed capacitor to restore consistent performance

• One replacement capacitor as shown

• Disconnect power before servicing and verify the appliance is de-energized
• Capacitors can hold charge — discharge safely before touching terminals
• Match terminal type and mounting location to the original part; do not force connections

This case assembly for the refrigerator control area houses and protects the control board and user interface components, helping keep electronics secure and accessible for diagnostics or replacement. What it does:

• Protects the control board and wiring from damage, dust, and moisture
• Provides mounting points and alignment for the user interface and controls
• Keeps the control area organized for service access and replacement
• Helps maintain proper airflow around control electronics where applicable

• Power off and unplug the appliance before servicing to avoid shock or injury
• Handle the control housing and any attached ribbons or connectors carefully to avoid damage
• Keep screws and small fasteners organized; verify fit before final assembly
• Follow manufacturer instructions and ESD precautions

This Front Cover Assembly replaces the main front panel of the appliance, restoring a finished appearance and protecting internal components. It helps keep the cabinet sealed and provides the proper mounting surface for controls and trim. What it does

• Replaces cracked, warped, or damaged front panel that exposes internal parts
• Restores proper alignment and fit of door, controls, and trim pieces
• Helps prevent dust, lint, or moisture from entering the cabinet
• Reduces vibration and rattling caused by a loose or broken front panel

• Disconnect power and any fuel supply before starting service
• Removing the existing panel may require removing screws, trim, or door assembly; keep fasteners organized
• Handle the replacement panel carefully to avoid scratching or bending during installation

This damper cushions and isolates the refrigerator compressor to reduce vibration and noise for smoother operation. It helps maintain stable compressor mounting and prevents metal-to-metal contact that can cause wear or rattling. What it does:

• Absorbs compressor vibrations to reduce noise and movement
• Helps protect the compressor housing and mounting points from shock
• Can reduce rattling or knocking sounds originating near the compressor area
• Supports proper alignment of the compressor assembly during operation

• One compressor damper (mounting isolator)

• Turn off power at the breaker and unplug the appliance before servicing
• Inspect mounting area and hardware; replace any damaged fasteners before installing the damper
• Position the damper on the compressor mount as shown in the service manual and secure per OEM guidance

This freezer shelf assembly restores a sturdy, level surface for food storage in your freezer. Replace a broken or missing shelf to maximize usable space, keep items organized, and maintain safe, easy access to stored foods. What it does:

• Provides a stable, level platform for freezer storage
• Replaces cracked, broken, sagging, or missing shelf panels
• Helps items stay organized and prevents tipping or shifting
• Can resolve issues with a shelf not seating or staying in its rails when the original is damaged

• 1 freezer shelf assembly

• Disconnect power and remove contents before servicing
• Lift out or unclip the damaged shelf; install the new shelf in the same orientation and position
• Ensure the shelf is fully seated in side rails or rear slots; do not force into place
• Distribute weight evenly before loading items

This sheath-style defrost heater warms the evaporator during the automatic defrost cycle to clear frost and keep air moving. Replacing a failed heater helps stop ice buildup on the evaporator and restores stable refrigerator temperatures.

• Heats the evaporator coil to melt accumulated frost/ice during defrost
• Helps maintain airflow for consistent cooling performance
• Typical failure symptoms include heavy frost on the back panel/evaporator, weak airflow, warmer-than-normal temperatures, or fan noise from ice contact
• Can contribute to repeat icing shortly after a manual defrost if open or damaged

• Disconnect power before servicing; wear cut-resistant gloves
• Access is typically behind the freezer/evaporator cover; fully defrost any ice before removal
• Reuse existing brackets, clips, or insulation as required; make secure electrical connections
• Do not kink or sharply bend the element; inspect related defrost components

This vegetable tray assembly replaces a damaged or worn crisper drawer to restore storage for fresh produce and help keep it organized in your refrigerator. Durable molded construction supports fruits and vegetables while sliding into the cabinet. What it does:

• Replaces a cracked, chipped, or broken crisper/vegetable drawer that won't hold produce
• Restores a smooth sliding drawer action when the tray and guides are intact
• Provides a dedicated, contained space to keep fruits and vegetables organized
• Helps prevent produce from spilling onto lower shelves

• One vegetable/crisper tray assembly

• Unload produce and remove the old tray before installing the replacement
• Inspect drawer rails/guides for damage and clean tracks of debris for smooth operation
• No special tools typically required; handle glass or plastic components carefully to avoid damage