7957313 Parts

This door gasket assembly seals a refrigerator/freezer door to keep cold air in and humidity out, helping maintain proper temperature and reduce frost buildup. It restores a tight door seal for better efficiency and food preservation. What it does:

• Replaces a worn, torn, or warped door seal that lets cold air escape
• Helps stop excessive frost or ice buildup and reduces condensation
• Improves cooling efficiency and can help stabilize internal temperature
• Reduces rattling or uneven door closure caused by a damaged gasket

• One door gasket assembly

• Disconnect power and remove stored food before starting the repair
• Inspect the door and sealing surface for damage or debris; clean before installing
• Seat the gasket evenly into the channel and work around the perimeter to avoid twists
• If needed, warm the gasket slightly for easier fitting; avoid open flames or excessive heat

This guide assembly is a replacement mounting guide that helps align and secure the TV's front panel and internal components to restore proper fit and reduce movement. It's a direct-fit part intended for OEM-style repairs. What it does:

• Holds and aligns the TV front bezel or panel for correct fit and finish
• Secures internal components to prevent shifting during use or transport
• Helps eliminate panel rattles, gaps, or misalignment caused by a damaged guide
• Restores proper assembly after impact or wear to improve appearance and stability

• One guide assembly

• Disconnect power and remove the TV from its stand before beginning
• Follow the TV service manual for safe disassembly and reassembly steps
• Keep track of screws and small parts; use proper tools and a soft work surface

This tray/drawer liner provides the structural shelf for a refrigerator drawer, helping contain food and spills while supporting the sliding drawer assembly. It restores proper fit and a clean surface inside the drawer compartment. What it does:

• Replaces a cracked, warped, or damaged drawer tray so the drawer sits and slides correctly
• Holds deli items, fruits and vegetables, and loose containers to prevent spills
• Helps contain leaks and makes cleaning easier compared with a damaged liner
• Reduces drawer noise caused by a broken or misshapen tray

• One tray/drawer liner

• Remove all food and contents from the drawer before replacing the tray
• Slide the drawer fully out (follow owner's manual removal steps) and lift or unclip the old tray as required
• Seat the new tray fully in the drawer frame; verify smooth sliding before refilling

This replacement plastic tube routes water between the supply, dispenser and ice-making components to restore proper water flow and prevent leaks. Use when the original tube is cracked, clogged, or leaking. What it does:

• Carries water from the supply/valve to the dispenser or ice maker assembly
• Replaces cracked, split, or collapsed tubing that causes leaks
• Helps restore normal dispenser flow when low or no water is delivered
• Prevents dripping or pooling from damaged lines

• One plastic water tube

• Disconnect power and shut off the water supply before servicing
• Relieve water pressure by operating the dispenser briefly after shutting off supply
• Inspect and reuse or replace any clamps, fittings, or grommets as needed for a watertight seal

This display cover assembly replaces a cracked, faded, or damaged control panel trim to restore a clean, readable display and protect the underlying electronics. It keeps the panel sealed and improves button visibility for normal operation. What it does:

• Protects the control board and display lens from dirt, moisture, and everyday wear
• Restores a clear viewing surface for the display and front controls
• Helps keep buttons and indicators securely seated and aligned
• Prevents further damage that can lead to erratic controls or unreadable display

• One display cover assembly

• Disconnect power (unplug or turn off breaker) before beginning any work
• Handle the cover carefully to avoid scratching or cracking the lens
• Typically requires removal of the control panel trim and fastening screws; keep original hardware unless replacement is provided

This Hinge Cover Assembly protects and conceals the door hinge area, restoring a clean appearance and preventing dirt or loose clothing from catching in the hinge. Fits where a cosmetic or protective hinge cover is needed. What it does:

• Covers the door hinge to shield moving hardware from debris and reduce pinching hazards
• Restores a finished look to a damaged or missing hinge area
• Helps keep lint, dust and small objects away from the hinge mechanism
• Can reduce noise caused by exposed hinge components when intact

• One Hinge Cover Assembly as shown

• Intended for drop-in replacement; follow your appliance's service manual for disassembly steps
• Disconnect power and water before starting any repair
• Handle plastic parts carefully to avoid cracking; use appropriate fasteners and torque per OEM guidance
• If hinge or mounting hardware is damaged, replace those components before installing the cover

This rail guide assembly replaces a worn or broken drawer rail to restore smooth, guided drawer movement and proper alignment. It supports the drawer glide so storage compartments open and close reliably. What it does:

• Guides and supports the drawer along its track for smooth sliding action
• Replaces damaged, bent, or worn rails that cause sticking, scraping, or misalignment
• Reduces noise from worn or loose drawer movement
• Helps keep the drawer square and properly seated to prevent jams

• Disconnect power to the appliance or remove contents as needed before starting work
• Basic hand tools typically required; keep fasteners for reuse unless replacements are provided
• Align rail on the drawer and cabinet track, then secure without over-tightening to avoid binding

This refrigerator shelf assembly replaces a damaged or missing interior glass shelf so you can safely store food and restore usable shelf space. It provides a stable, easy-to-clean surface for everyday refrigerated items. What it does

• Replaces cracked, chipped or broken refrigerator shelving to restore storage function
• Supports food containers, bottles and small appliances while maintaining even airflow
• Provides a smooth, washable surface that helps keep spills contained and easy to clean
• Fits into designated shelf tracks or brackets to hold contents securely

• One refrigerator glass shelf assembly

• Handle glass carefully and wear cut-resistant gloves to avoid injury
• Remove all contents and support adjacent shelves before removing the old shelf
• Slide or seat the shelf into the existing shelf tracks or brackets until fully engaged

This vegetable tray assembly replaces the crisper drawer that stores fresh produce and keeps it organized in the refrigerator. Restores proper storage and smooth drawer operation for better food organization and access. What it does:

• Provides a dedicated drawer for fruits and vegetables to help keep produce separated and contained
• Slides into the existing lower compartment tracks to allow easy open/close access
• Replaces cracked, broken or warped trays that can leak or fail to support contents
• Helps prevent items from falling onto lower shelves when the drawer is opened

• Remove all food and shelves from the compartment before starting
• Slide the old tray out and lift or unclip from its runners per your model's design
• Align new tray with existing tracks and slide in until it seats; no special tools typically required
• Unplug the appliance or disconnect power before working in the refrigerator for safety

The Main PCB Assembly is an OEM component specifically designed for LG refrigerators. Housed inside the control housing, this circuit board directs all critical refrigerator operations from cooling and icemaking to door alarms. Precise programming maintains consistent temperatures across compartments.  

Causes of a bad main PCB can include physical impact, water damage into circuit paths, or expected component degradation over time. Without proper control, the refrigerator sections cannot regulate temperatures as designed.

Symptoms of a bad main PCB include:

• Inability to adjust temperature settings    
• Erratic cooling or icemaker performance
• Intermittent control functions and error codes
• Improper defrost functions 

This LG OEM replacement ensures reliable operation for years to come. Compatible also with Sears/Kenmore refrigerators, it provides a direct fit and restoration of cooling and temperature functions. 

A small trim cap that covers and protects an exposed fastener or access opening, restoring the appliance's finished appearance and helping keep dirt and moisture out of the opening. What it does:

• Covers exposed screw heads or access holes to improve appearance
• Helps prevent dirt and moisture from entering openings around fasteners
• Restores a flush, finished surface after repair or panel removal
• Reduces the chance of snagging or accidental contact with recessed hardware

• One cap cover

• Disconnect power to the appliance before starting any repair
• Press into place over the fastener or opening until fully seated; no special tools usually required
• Avoid forcing or prying to prevent breakage of the cap or surrounding trim
• Replace any damaged surrounding trim or retainers to ensure a secure fit