7957313 Parts

This hinge assembly replaces a worn or damaged refrigerator door hinge to restore proper door alignment and smooth opening and closing. It helps stop sagging doors, noisy movement, and improper sealing for better cooling performance. What it does:

• Supports and pivots the refrigerator door for correct alignment and even sealing
• Replaces broken, bent, or worn hinge hardware that causes door sag or misalignment
• Reduces rubbing, grinding, or noisy hinge movement when opening or closing
• Helps restore proper door closure to prevent cold air loss and temperature issues

• Unplug the appliance and support the door before removing hinge hardware to prevent injury or damage
• Transfer any mounting screws or brackets only if specified by the OEM; replace visibly damaged fasteners
• Tighten mounting fasteners to secure the hinge but avoid over-torquing; confirm door alignment after installation

The MOTOR, DC is an OEM part for LG refrigerators. It is a direct current electric motor responsible for operating components related to cooling and airflow, such as the condenser fan and cooling fan. Efficient airflow circulation is critical for pulling heat away from refrigerated compartments and maintaining even temperatures throughout the fridge.

Causes of a bad motor can include excess dust buildup over time inhibiting proper fan rotation, worn motor brushes, or damaged motor windings affecting current flow. 

Symptoms of a bad direct current motor include:

• Abnormally warm refrigerator temperatures 
• Louder than usual operating sounds
• Lack of air coming from ventilation areas  
• Visible buildup of frost or condensation inside the fridge

Replace yours today with this genuine OEM LG part to restore optimal cooling performance. This OEM LG part is also compatible with Sears/Kenmore.

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This cover assembly protects the appliance's printed circuit board from debris, moisture and accidental contact, helping preserve reliable control operation. It provides a secure enclosure that keeps the PCB mounted and shielded during normal use. What it does:

• Shields the control board from dust, moisture splash and foreign objects that can cause shorts or component damage.
• Keeps wiring and connectors routed and secured to reduce strain and intermittent connections.
• Helps maintain correct spacing and alignment of the PCB for reliable electrical contacts.
• Useful when the original plastic cover is cracked, warped, missing or allows board exposure.

• One cover assembly for PCB.

• Disconnect power to the appliance before beginning any service to avoid shock or damage.
• Handle the PCB and connectors carefully; avoid touching board components or bending traces.
• Align cover over the PCB and fasten with the original screws or clips; do not overtighten plastic fasteners.

This cover assembly is the TV's rear housing that protects internal circuitry and provides the finished exterior. It restores structural support and appearance so components stay enclosed and the set looks complete. What it does:

• Replaces a cracked, broken or missing rear housing that exposes internal parts
• Secures internal boards, connectors and the power/AV ports in their mounting locations
• Restores the TV's outer appearance and prevents dust or debris from reaching electronics
• Helps align the chassis for proper attachment of stands and external panels

• Unplug the TV and place it on a soft, flat surface before beginning work
• Remove the stand and all external cables; keep screws organized for reassembly
• Handle with care to avoid scratching the finish or damaging mounting tabs

This Hinge Cover Assembly replaces the plastic trim that protects and finishes the door hinge area, restoring appearance and shielding the hinge from dust and light damage. Ideal when the hinge trim is cracked, chipped, or missing. What it does:

• Covers and protects the door hinge area to prevent debris buildup and reduce visual wear.
• Restores the appliance's finished appearance when the original trim is cracked, broken, or missing.
• Helps maintain smooth door operation by keeping the hinge area clear of obstructions.
• Compatible with hinge repairs where the hinge hardware is sound but the cosmetic cover is damaged.

• One Hinge Cover Assembly

• Disconnect power to the appliance before beginning any repair to avoid electrical hazard.
• Remove the door or open it to access hinge screws; use basic hand tools (screwdriver) as needed.
• Replace the cover without forcing it; align tabs and fasteners, then secure hardware to manufacturer torque recommendations.
• If hinge hardware is damaged or door alignment is off, replace or adjust hinge components separately.

This door foam assembly restores the thermal insulation inside a refrigerator door to help maintain consistent cooling and reduce condensation. Use it to replace compressed or damaged foam that lets cold escape through the door. What it does:

• Reestablishes the door's internal thermal barrier to help maintain proper temperature
• Reduces door-surface condensation or frost caused by lost insulation
• Helps prevent warm spots and uneven cooling near the door
• Supports proper sealing and energy efficiency when paired with intact gaskets

• Unplug the appliance before starting any repair
• Removing the door panel/pocket is usually required; handle panels and clips carefully
• Avoid puncturing or compressing the foam during installation
• Follow the manufacturer service manual or instructions for disassembly and torque specifications

This right-side handle assembly replaces a damaged or missing refrigerator door handle so you can open and close the door smoothly and restore the appliance's appearance. Durable molded construction matches the original fit and finish. What it does:

• Replaces a cracked, broken, loose or missing right-side door handle
• Provides a secure grip for opening and closing the refrigerator door
• Restores door alignment and appearance when original handle is damaged
• Matches OEM mounting points for correct fit and operation

• Disconnect power to the appliance before starting any repair to reduce electrical/safety risk.
• Typical installation uses screws or clips at the door trim; handle may attach from the inside of the door.
• Keep original fasteners and hardware; confirm orientation (right-side) before tightening.