Amana Radarange Microwave Parts

The Thermistor Assembly is an OEM part for LG air conditioners. It is typically located near the evaporator coil or in the air intake area of the unit. It measures the ambient temperature and sends signals to the control board to adjust the cooling output accordingly.

Causes of a faulty or malfunctioning thermistor assembly can include normal wear and tear, exposure to extreme temperatures, or electrical issues. These factors can lead to inaccurate temperature readings, improper cooling performance, or erratic behavior of the air conditioner.

Symptoms of a bad thermistor assembly may include:

• Inconsistent cooling or insufficient cooling
• Inaccurate temperature display on the control panel
• Frequent cycling on and off of the compressor

This OEM LG part can also be used on Kenmore/Sears appliances. 

Replace a missing or damaged installation kit with this Install Part Assembly. Designed for select air conditioners, it helps secure and seal the unit during setup for a stable fit and reliable performance.

• Provides the correct mounting/finishing components needed for proper installation
• Helps seal the opening to minimize air leaks and reduce vibration/noise
• Restores secure, stable support of the chassis during and after install
• Symptoms indicating replacement: incomplete installation, loose fit, rattling, or drafts around the unit

• Disconnect power before beginning; use two people to lift and support the unit
• Follow the model's installation instructions carefully
• Inspect the opening/sleeve; install level and tighten all fasteners securely
• After installation, verify a tight perimeter seal and stable, rattle-free operation

This installation kit includes the manufacturer-specified hardware used to secure and align an appliance during setup. Use it to replace missing or damaged install hardware and restore a safe, stable, factory-correct fit in the opening. What it does:

• Provides required mounting hardware for proper installation
• Helps prevent shifting, rocking, or tipping when the appliance is used
• Aids in correct alignment and spacing within the cabinet/opening
• Replaces lost or damaged original install parts

• One installation kit

• Disconnect power (and gas/water, if applicable) before starting
• Follow your model's installation instructions for bracket locations and fasteners
• Use appropriate anchors for wall/floor material as specified by the manufacturer
• After installation, verify the unit is level and securely anchored

This remote controller assembly replaces a malfunctioning TV remote control PCB and housing to restore infrared/IR command transmission and on-unit button control. Ideal when the remote stops responding or buttons become unresponsive. What it does:

• Replaces the internal PCB and button assembly that sends IR signals to the TV.
• Restores remote control functions like power, volume, channel, and input selection.
• Helps resolve symptoms such as no response from the remote, intermittent commands, or stuck/non-working buttons.
• Works with the existing remote cover and batteries if those components are reused.

• Disconnect power to the TV and remove batteries from the remote before replacing the assembly.
• Use appropriate small screwdrivers and keep track of screws and clips; handle the PCB by its edges to avoid damage.
• Reassemble carefully, insert fresh batteries, and test all functions after installation.

This isolator routes microwave energy between the magnetron and waveguide to help protect components and maintain consistent heating performance. Replacing a failed isolator can restore reliable cooking and help prevent further high-voltage damage. What it does:

• Directs RF energy from the magnetron into the waveguide/cavity
• Helps protect the magnetron by reducing reflected energy
• Aids in preventing arcing or burn damage in the waveguide area
• Common symptoms of failure: no heat or uneven heating, loud humming/buzzing, visible arcing/burn marks near the waveguide

• 1 isolator

• Disconnect power and discharge the high-voltage capacitor before servicing; risk of electric shock
• Handle waveguide components carefully; avoid contaminating RF surfaces and note exact orientation
• Take photos of the original setup to match positioning and fastener locations

This power cord assembly provides the main AC connection for your appliance so it can receive reliable power. Replacing a damaged cord restores safe, consistent power delivery and reduces risk of intermittent operation or electrical hazards. What it does:

• Supplies AC power from the outlet to the appliance's internal power input
• Replaces frayed, cracked, or damaged wiring that can cause intermittent power or failure to start
• Helps eliminate loose or corroded connector issues that produce sparks, arcing, or burning smells
• Restores a secure, factory-style connection when the original cord is worn or broken

• Disconnect the appliance from power at the outlet before servicing
• Route the cord and secure strain relief exactly as the manufacturer specifies to avoid pinching
• Inspect connectors and terminals for damage; replace the entire assembly if terminals are corroded or insulation is compromised

This compressor isolator is a rubber mount that cushions and reduces vibration and noise from the compressor, helping keep the appliance quieter and preventing metal-to-metal contact. What it does:

• Dampens compressor vibration to reduce noise and rattling
• Helps prevent compressor movement that can strain mounting hardware
• Reduces transfer of vibration to the cabinet and surrounding components
• Commonly replaced when vibration noise or scraping is heard from the base

• One compressor isolator (rubber mount)

• Disconnect power to the appliance before any service and work with the appliance unplugged
• Access may require tilting or moving the appliance; use safe lifting practices and get help if needed
• Inspect surrounding mounts and hardware; replace like-for-like and verify fit before final assembly

This drawing capacitor helps provide the extra electrical boost motors need to start and run smoothly, restoring normal operation and reducing strain on the motor. It's a direct-fit replacement when the original capacitor fails. What it does:

• Supplies a timed voltage boost to assist motor startup and rotation
• Helps reduce motor humming, slow starts, or failure to start
• Promotes consistent motor speed during operation for reliable performance
• Can prevent added stress on the motor windings when functioning properly

• One drawing capacitor

• Disconnect power to the appliance before attempting any service
• Capacitors can hold charge—discharge safely and use insulated tools
• Verify correct orientation and secure connections; replace only with the exact part number

This Front Grill Assembly replaces the removable front trim that surrounds the appliance door and vents, restoring appearance and airflow. It provides a finished look and helps direct airflow while protecting internal components from debris. What it does:

• Replaces damaged, cracked, or faded front trim to improve appearance
• Restores proper grille fit to help direct air through the front vent area
• Helps reduce entry of lint and debris into the cabinet opening
• Useful when gaps or loose trim allow rattling or scraping noises

• High-level replacement—remove power and, if applicable, disconnect the appliance before beginning
• Require removal of a few screws or clips from the door or front panel; hold parts securely to avoid dropping
• Inspect surrounding seal, screws, and clips and replace any damaged fasteners for a secure fit

This film capacitor box is the boxed capacitor assembly used to stabilize and filter voltage in the appliance's control/power circuit. It restores proper electrical smoothing to help reduce noise and improve starting/operation reliability. What it does:

• Provides filtered, stabilized capacitance for control and power electronics
• Reduces electrical noise that can cause erratic control behavior or interference
• Helps ensure reliable motor or compressor starting and steady operation
• Can address symptoms such as humming, intermittent operation, or control errors related to power conditioning

• Disconnect power to the appliance before servicing to avoid shock hazard
• Capacitors can hold charge—discharge safely and verify voltage is zero before touching terminals
• Handle the assembly carefully and avoid crushing or deforming the box or leads

These replacement left and right curtains restore the trim/cover pieces on the refrigerator drawer or door area to improve fit and appearance. They match the OEM shape so drawers and panels seat correctly. What it does

• Replaces worn, cracked, or broken left and right curtain trim pieces
• Helps keep drawers and panels aligned and covered for a finished look
• Reduces visible gaps and prevents catches or rubbing when opening/closing
• Commonly replaced when curtains are cracked, warped, or missing

• One left curtain and one right curtain

• Disconnect power to the appliance before servicing and remove stored items from the affected area
• Remove the drawer/panel per the service manual to access curtain clips or fasteners
• Install the new curtains until clips snap in and the piece seats flush; verify smooth drawer/panel movement
• If any clips or fasteners are damaged, replace them separately

This horizontal louver directs airflow inside the appliance to help even cooling and prevent direct blasts on food. It restores proper air distribution when vent fins are broken or stuck. What it does:

• Guides refrigerator/freezer airflow for more even temperature distribution
• Replaces cracked, warped, or missing horizontal vent slats
• Helps reduce cold spots caused by misdirected air
• Visible damage or a louver that won't hold position are common symptoms

• One horizontal louver

• Disconnect power before servicing to avoid electrical hazards
• Remove nearby shelves or drawers for access if needed
• Typically snaps or slides into the vent housing; align and seat gently to avoid breaking tabs
• Inspect surrounding clips and housing; replace if damaged