Dacor Mov230s Parts

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

A replacement bake glass panel for the oven door that restores the viewing window and barrier between the oven cavity and exterior. Helps maintain a clear view of cooking and restores the door's protective glass. What it does:

• Replaces cracked, chipped, or fogged oven door glass to restore visibility and appearance
• Provides the glass barrier that helps contain heat inside the oven cavity
• Reduces drafts or heat loss from a damaged door glass
• Works as the visible window for monitoring food without opening the door

• One oven door bake glass panel

• Disconnect power to the appliance before beginning any repairs
• Handle glass carefully; wear cut-resistant gloves and eye protection
• Installation may require removing the oven door and separating door panels—refer to OEM service instructions
• Reuse existing parts or obtain OEM replacements

This service tool is designed to handle dual-ring gas burner components during service and repair, helping seat and remove burner parts cleanly to reduce damage and speed maintenance. What it does:

• Helps install, remove, and align dual-ring burner elements and caps without scratching or bending
• Enables safer handling of burner assemblies during maintenance and replacements
• Useful when burners show uneven flame, inconsistent ignition, or need realignment
• Reduces risk of damaging delicate burner parts while servicing

• Disconnect power and turn off the gas supply before servicing gas components
• Use only as intended for burner servicing
• Wear appropriate PPE (gloves, eye protection) when working on gas ranges
• Recommended for use by trained service technicians or repair personnel

This service filter conversion kit includes two replacement filter screens that help trap lint and debris in the appliance's airflow path, helping maintain proper ventilation and reduce clogs for more reliable operation. What it does

• Replaces worn or damaged filter screens to restore proper debris capture
• Helps prevent lint buildup that can restrict airflow and reduce performance
• Can resolve symptoms such as reduced drying efficiency, longer cycles, or error codes related to airflow blockage
• Supports routine maintenance and targeted repairs during service

• Two replacement filter screens

• Disconnect power before servicing and follow the appliance's service manual
• Remove and inspect the filter housing; replace both screens for best results
• Use basic hand tools; handle screens carefully to avoid damage to fine mesh
• After installation, run a short test cycle and recheck airflow and seals

This service door window pack replaces a damaged or worn microwave/oven door window to restore visibility and proper sealing. It provides the visible glass assembly used in the appliance door for safe operation and viewing. What it does:

• Replaces cracked, scratched, foggy or broken door window glass
• Restores clear viewing of the cooking cavity for monitoring food
• Helps maintain the door seal and proper operation when installed correctly
• Prevents potential heat/light leakage caused by damaged window components

• One door window service pack

• Disconnect power before beginning any door repairs to avoid shock or injury
• Handle glass components with care and wear cut-resistant gloves
• Ensure all retained clips/gaskets are reinstalled and the window is seated per OEM alignment

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

This switch assembly restores proper control signaling for the appliance by replacing a worn or damaged switch. It helps return reliable on/off or control-switch operation so the appliance responds correctly to user inputs. What it does:

• Acts as the electrical/mechanical switch that completes or interrupts control circuits
• Replaces a faulty switch that can cause intermittent or no power to selected functions
• Helps resolve symptoms such as unresponsive controls, no-start conditions, or erratic operation
• Matches the OEM shape and mounting for straightforward replacement when compatible

• Disconnect power (unplug or shut off breaker) before starting any repair
• Handle the assembly and connector ends carefully to avoid damage
• Follow the OEM instructions for proper removal and installation

A replacement service screw used to secure appliance panels and components. Durable fastener sized for common service points, making repairs and panel reassembly quick and reliable. What it does:

• Secures trim, access panels, brackets or small components during service and reassembly
• Commonly used where a shallow truss/wafer head is needed to sit flush without catching
• Helps stop rattling or loose parts caused by missing or stripped screws
• Matches OEM fit for compatible assemblies when the OEM part number is required

• One service screw (#8 x 1/2" truss/wafer head) as specified by the OEM part number

• Use the matching size driver to avoid cam-out and head damage
• Hand-start fasteners to avoid cross-threading; tighten until snug — do not overtighten
• Wear safety glasses and disconnect power before working on electrical appliances
• If a screw threads into plastic or thin sheet metal, consider replacing with the same OEM screw to preserve original threads

This service hinge kit repairs a worn or damaged microwave/oven door hinge assembly to restore proper door alignment and secure closing. It replaces the basic hinge components that support and guide the appliance door. What it does:

• Replaces the door hinge assembly to correct sagging or misaligned doors
• Restores smooth opening and closing and reduces door wobble or binding
• Helps stop gaps that can interfere with proper sealing or latching
• Addresses symptoms such as noisy hinges, loose door movement, or doors that won't stay closed

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle door and any glass panels carefully to avoid breakage or injury
• Basic hand tools are typically required; follow OEM service manual for exact steps

This hi-limit thermostat is a temperature safety switch that opens at 275°F to stop the heater when a dryer overheats, protecting the appliance and home. Use it to restore proper over-temperature protection. What it does:

• Monitors dryer temperature and opens the circuit at 275°F to prevent overheating
• Stops power to the heating circuit when the set limit is reached
• Common symptom: dryer heater cuts out or the dryer stops heating intermittently
• Helps prevent damage to the heating element and reduces fire risk when functioning correctly

• Always disconnect power to the appliance before inspecting or replacing the thermostat
• Verify the part number and orientation before removing the old thermostat
• Check continuity with a multimeter to confirm the thermostat opens/closes as expected

This service kit replaces the convection fan used to circulate hot air for more even baking and roasting in compatible ovens. Restores convection performance and helps eliminate uneven cooking or reduced airflow. What it does:

• Replaces the convection fan assembly that moves hot air around the oven cavity
• Helps correct uneven baking or roasting caused by a failed or noisy fan
• Reduces unusual fan noise when the original fan motor or blade is worn
• Restores convection function so recipes relying on fan-assisted cooking perform properly

• Disconnect power and allow the oven to cool before attempting any service
• Handle sharp sheet-metal edges and the fan blades with care
• Follow manufacturer instructions for installation
• Verify fit and function after replacement before normal use

This oven bake gasket seals the gap between the oven door and cavity to help retain heat and maintain even cooking. It replaces a worn or damaged seal for improved temperature performance and reduced heat loss. What it does:

• Seals the oven door to help keep heat inside the cooking cavity
• Reduces heat escape that can cause uneven baking or longer cook times
• Helps prevent hot air and smoke from leaking around the door
• Replaces torn, flattened or brittle gasket material that no longer seats correctly

• One bake gasket (single oven door seal)

• Disconnect power (and gas if applicable) and allow the oven to cool before servicing
• Handle the gasket carefully and wear gloves to avoid cuts from metal edges or glass
• Ensure gasket is seated fully into the channel and trim/fit per OEM guidance; door or inner panel removal may be required