Frigidaire Ffpt10f0kb Parts

This starter is the compressor start relay that briefly powers the start winding to get the compressor turning. Replacing a weak or failed starter can restore reliable compressor startup and consistent cooling performance.

• Engages the compressor's start winding at power-up, then disengages as the motor reaches speed
• Helps prevent repeated clicking, stalling, and overheating at the compressor
• Common symptoms include no cooling while fans run, compressor hums or clicks but won't start, or short-cycles on the overload
• Physical signs may include heat damage or a burnt odor on the original start device

• Disconnect power and allow the compressor to cool before service
• Discharge any capacitors per manufacturer instructions
• Note wire positions and terminal orientation; transfer leads one at a time
• Push the relay fully onto the compressor pins; ensure a secure fit without bending terminals

This capacitor stores and releases electrical energy to help a motor or compressor start and run smoothly. Replacing a weak or failed capacitor can restore proper startup, reduce humming, and improve overall cooling performance.

• Provides the phase shift and torque boost needed for AC motors to start
• Stabilizes motor operation during run for consistent performance
• Common symptoms of failure: motor/compressor hums but won't start, intermittent starting, reduced cooling/airflow
• Visual clues include a swollen/bulging top or leaking oil residue
• Contribute to breaker trips or overheating when degraded

• Disconnect power and safely discharge the old capacitor before handling
• Photograph wiring and transfer leads to the matching terminals on the new capacitor; match microfarad (µF) and voltage ratings to the original
• Mount securely; avoid contact with sharp edges or moving parts
• Check the motor/compressor and wiring for additional faults

The Crisper Drawer is an OEM part for Frigidaire refrigerators. Designed to hold fruits and vegetables, this drawer optimizes the humidity levels to extend the freshness and lifespan of produce. It slides easily into its designated slot within the refrigerator, offering convenient storage and organization for your perishable items.

Causes of a bad crisper drawer can include overloading, which might lead to cracks or breaks; warping from the constant temperature changes inside the refrigerator; or the deterioration of the plastic material over time due to frequent cleaning agents or spills.

Symptoms of a bad crisper drawer include:

• Difficulty in sliding the drawer in or out
• Cracks or damage that can lead to leaks or decreased effectiveness in humidity control
• A loose fit within the refrigerator frame, which can affect its ability to maintain the proper humidity levels

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement refrigerator door gasket creates a tight seal around the door to help keep cold air in and reduce moisture. A worn or damaged gasket can lead to temperature loss and higher energy use. What it does:

• Seals the refrigerator door to maintain proper internal temperature
• Helps prevent warm air, moisture, and frost buildup around the door
• Reduces compressor run time caused by air leaks
• Common symptom link: visible cracks, gaps, or a door that doesn't close snugly

• Disconnect power to the appliance before starting any work
• Remove the old gasket carefully; retain any screws or retainer clips if present
• Warm and flex the new gasket as needed for easier fitment; ensure the magnetic edge seats fully along the door frame
• If the door still doesn't seal after installation, check door alignment and hinge adjustment.

This refrigerator temperature sensor detects fresh-food compartment temperature and provides the thermostat/control board with the readings needed for proper cooling management. Replacing a failed sensor restores accurate temperature feedback to the control system. What it does:

• Measures internal fresh-food compartment temperature for the control board
• Helps the fridge regulate run cycles to maintain set temperatures
• Faulty sensor can cause incorrect temperature display or inconsistent cooling

• Always unplug the appliance before attempting any repair.
• Handle the sensing tip and wiring harness gently to avoid damage.
• Use basic hand tools; follow the wiring diagram for location and routing.

This replacement door rack mounts on the refrigerator door to hold bottles, jars, and condiments securely. It restores usable storage space and helps prevent items from tipping or falling when the door is opened and closed.

• Mounts to the inner door panel to create a retaining barrier for door shelves
• Keeps items contained and organized on the door
• Common symptoms: cracked, broken, warped, loose, or missing rack; items fall from door shelves
• Also known as a door shelf rack or retainer bar

• Typically tool-free: align rack ends with the door slots/tabs and snap firmly into place
• Install at room temperature and avoid forcing the part to prevent cracking
• Verify a secure fit before loading; distribute weight evenly

This plastic outer housing cover protects internal components and gives the appliance a finished appearance. It helps keep wiring and controls enclosed so the unit looks complete and safer to use. What it does

• Covers and protects internal components from dust, debris and incidental contact
• Restores the appliance's finished exterior where a broken or missing cover left an opening
• Helps prevent accidental contact with wiring or control parts behind the panel
• Visible damage or cracks can let in moisture or debris and warrant replacement

• One cover

• Disconnect power (unplug or shut off breaker) before removing or installing the cover
• Use appropriate hand tools to remove fasteners; keep track of screws and clips
• Handle the part gently to avoid cracking plastic or bending mounting tabs

This push-button door switch completes the door circuit to turn the interior light on and signal door-open status. It replaces a failed switch to restore proper light and door-sensing function. What it does:

• Detects door open/closed position and makes/breaks the circuit for the interior light
• Restores interior lamp operation when the door is opened
• Commonly replaces switches that are stuck, intermittent, or fail to actuate
• Helps eliminate issues where the light stays on, never turns on, or flickers

• One door switch

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access typically requires removing the door light lens or trim — keep trim and fasteners for reassembly
• Handle the switch and wiring gently; avoid pinching or straining the harness

This motor assembly powers the dryer drum and blower to tumble laundry and move air through the cabinet for consistent drying. It restores rotation and airflow when the original motor has failed. What it does:

• Drives the drum to tumble clothes during the dry cycle
• Powers the blower to circulate air through the lint screen and exhaust
• Commonly replaced for symptoms like no tumbling, reduced airflow, or burning/motor noise
• Works as a direct-replacement motor assembly when the OEM part number matches

• One motor assembly (single complete unit)

• Disconnect power (unplug or shut off breaker) before starting any repair
• Follow your appliance's service manual for panel removal and part routing
• Support the drum and wiring during removal to prevent damage