Jn3270x1wh Parts

The Charcoal Filter is an OEM part for GE microwaves. It is designed to remove odors and impurities from the air that is recirculated during microwave operation. The charcoal filter plays a crucial role in maintaining a clean and odor-free kitchen environment by trapping grease and odors from the cooking process.

You should replace the charcoal filter regularly as part of routine maintenance. Causes of a bad charcoal filter can include saturation from grease and food particles, reduced effectiveness due to prolonged use, or physical damage.

Symptoms of a bad charcoal filter include:

• Persistent odors in the kitchen
• Visible grease buildup on the filter
• Reduced ventilation efficiency

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grease Filter is an OEM part for GE range hoods. It is designed to trap grease and other particles from the air that circulates through your cooking appliances, preventing buildup within the ventilation system. 

Causes of a bad Grease Filter can include saturation from accumulated grease and debris, which can limit its effectiveness and airflow. Over time, the filter can also become damaged or corroded, reducing its ability to capture and hold grease particles.

Symptoms of a bad Grease Filter include:

• Visible grease buildup on the filter surface.
• Reduced effectiveness in venting smoke or cooking odors.
• Increased smoke and odors lingering in the kitchen during and after cooking.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fan clip secures the ventilation fan blade or blower wheel to the motor shaft, preventing looseness and vibration. Replacing a worn or missing clip restores a tight fit so the fan runs smoothly and maintains proper airflow.

• Holds the fan blade/blower wheel firmly on the motor shaft
• Helps reduce wobble, scraping, or rattling noises during fan operation
• Can resolve a loose or non-spinning fan caused by a failed/missing retainer
• Supports proper airflow and cooling performance

• Disconnect power and allow the appliance to cool before servicing
• Access the fan/blower assembly and note the original clip's orientation
• Seat the clip fully in the shaft groove; ensure the wheel is secure and spins freely
• Wear cut-resistant gloves and use caution around sharp metal edges

This replacement motor restores reliable rotation to the component it powers, helping your appliance operate smoothly and as designed. Swap out a worn or seized motor to bring motion and performance back to normal.

• Supplies rotational power to the attached mechanism inside the appliance
• Common failure symptoms: no movement, humming without turning, grinding/squealing noises, or intermittent/slow operation
• A failed motor can lead to loss of function and unusual noise from the driven part
• Replacing the motor restores proper motion and helps maintain overall performance

• Disconnect power to the appliance before servicing
• Access the motor area; note wire locations and the motor's orientation before removal
• Transfer any brackets, grommets, or screws from the old motor as needed; beware of sharp edges
• After mounting, ensure the shaft/attached part spins freely and clear of obstructions before reassembly and testing

This lamp socket holds the appliance light bulb and provides the electrical connection it needs, restoring reliable, steady lighting so you can see clearly during cooking and routine checks.

• Provides secure electrical contact to power the light bulb
• Holds the bulb firmly in the light assembly
• Replaces heat-damaged or brittle sockets that cause flickering or no light
• Common symptoms: light won't turn on with a known-good bulb, flickers, bulb won't seat, or visible charring/melting at the socket

• Disconnect power at the breaker and allow the appliance to cool before service
• Wear cut-resistant gloves; nearby metal and glass edges can be sharp
• Move wires one at a time from the old socket to the new to maintain correct connections
• Install a bulb that matches your model's specified type and wattage before restoring power

This replacement fan blade restores proper airflow inside your microwave, helping cool internal components so the unit runs reliably and quietly. A worn or damaged blade can reduce ventilation and lead to noise or overheating during operation.

• Circulates air to help cool internal parts and maintain proper airflow
• Helps reduce humming, rattling, or scraping noises from a damaged or unbalanced fan
• Can address weak or no airflow from the fan area
• May help prevent overheating or thermal shutdowns caused by poor circulation

• Disconnect power to the microwave before servicing to avoid electrical shock
• Access the fan area; remove grille/panels as required
• Note blade orientation; transfer any clips, spacers, or hardware from the original
• After installation, spin the blade by hand to ensure free movement before restoring power

This fan control switch operates the fan motor to regulate blower speed and restore proper airflow in affected appliances. A direct-fit replacement designed to return fan control without reworking wiring or mounting. What it does:

• Selects and maintains fan speed for proper airflow and cooling
• Restores fan operation when the blower won't run or only runs at one speed
• Helps resolve noisy, intermittent, or non-responsive fan behavior
• Works as the user-facing control that communicates speed settings to the fan motor

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools; avoid forcing connectors or terminals

Replacement fan switch that restores manual control of the appliance fan, allowing safe on/off operation and reliable ventilation or cooling. Use this switch to replace a worn or non-responsive fan control. What it does:

• Provides user control of the appliance fan (on/off function)
• Replaces a faulty switch that causes the fan to not start or not respond
• Helps restore proper ventilation/cooling when a bad switch prevents fan operation
• Fits as a direct replacement when the part number and terminals match

• Disconnect power to the appliance (unplug or shut off circuit breaker) before beginning work
• Access may require removing panels or the control console; keep fasteners and hardware for reassembly
• Match terminal positions and securely attach connector(s); do not force connectors or bend terminals

This motor bracket secures the appliance motor to the cabinet, keeping the motor aligned and stable for reliable operation. It's a direct-fit replacement that restores proper motor support and reduces noise from misalignment. What it does:

• Supports and positions the motor so the shaft and pulleys line up correctly
• Prevents excess motor movement that can cause vibration or rubbing noises
• Helps maintain proper belt/pulley tension for effective power transfer
• Restores secure motor mounting after damage or corrosion

• Follow the appliance service manual for removal and reassembly; secure all mounting hardware to the specified torque.
• Disconnect power before starting work to avoid electrical shock.
• Inspect surrounding mounting holes and fasteners; replace any damaged screws or hardware.
• Check belts, pulleys, and motor mounts for related damage.

This lamp switch controls the oven interior light, letting you turn the light on or off from the range/oven control panel. Replaces a worn or non-working light switch to restore oven lighting control. What it does:

• Acts as the control for the oven interior lamp when you press the switch
• Commonly used when the light won't turn on, flickers, or the switch feels loose
• Provides a direct electrical connection between the oven lighting circuit and the lamp
• Matches OEM fit and function for compatible GE ranges and ovens

• 1 lamp switch

• Disconnect power to the appliance before servicing to avoid shock
• Basic wiring and panel access are required; keep track of mounting screws and wire locations
• Only install parts intended for your appliance model

This retaining nut is a small threaded fastener that secures appliance components in place, restoring stable mounting and preventing vibration or movement. It's a simple replacement for worn or missing nuts on compatible GE appliances. What it does:

• Secures elements, brackets or terminals to prevent loosening during use
• Stops rattling or movement caused by a missing or stripped nut
• Helps maintain proper alignment for heating and electrical connections
• Commonly used where a compact, threaded retaining nut is required

• One retaining nut

• Inspect mating threads and surrounding hardware; replace damaged studs or bolts as needed
• Hand-start the nut to avoid cross-threading, then tighten with the appropriate tool
• Disconnect power to the appliance before working near electrical components

This small plastic wire clip secures an appliance wiring harness to the cabinet or chassis, keeping wiring routed and held firmly to prevent rubbing or pinching during use. What it does:

• Holds wiring harnesses in place to reduce movement and protect insulation
• Prevents wires from contacting hot or sharp surfaces that can cause wear
• Reduces rattling or banging noises from loose wiring
• Helps prevent intermittent electrical connections caused by loose or strained wires

• One wire clip

• Disconnect power to the appliance before starting any work
• Clip typically snaps into a pre-punched hole or slides onto a flange; line up the harness and press clip until it seats
• Inspect wiring and insulation when replacing clip; route wires away from heat and moving parts
• Replace with the exact part number for a proper fit