Mfri2568aes Parts

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This 2-pack of dryer vent clamps secures the vent hose to the dryer outlet and the wall/vent hood. A tight connection helps maintain airflow, reduce lint leaks, and keep the duct from slipping off during use.

• Tightens around the vent hose to hold it securely to the dryer exhaust collar or exterior vent
• Helps prevent hose detachment, air leaks, and lint escaping at the connection
• Supports proper exhaust airflow by keeping connections sealed and stable
• Common symptoms pointing to replacement: hose won't stay on, visible gaps or lint around fittings, rattling at the vent, or longer dry times from poor ventilation

• Disconnect power; for gas dryers, shut off gas supply before moving the appliance
• Slide a clamp over the hose, seat the hose fully on the collar, position clamp over the fitting, and tighten with a screwdriver or nut driver
• Do not overtighten; avoid crushing thin foil ducting; ensure the hose is straight and not kinked
• Restore power and verify strong airflow at the exterior exhaust

This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.

• Tightens around a hose and fitting to maintain a secure seal
• Helps stop drips, seepage, or loose connections
• Common fix when you see moisture around a hose joint
• Useful if a clamp is rusted, stretched, or no longer holding tension

• Unplug power and shut off water (if applicable) before servicing
• Note clamp position/orientation before removal
• Use appropriate screwdriver or nut driver to tighten evenly
• Do not overtighten—ensure a snug, leak-free seal without damaging the hose

This 250V, 1A fuse protects your washer's control circuit from overcurrent. Replacing it can restore control power once the root cause is corrected.

• Opens to protect electronics when current exceeds its 1A rating
• Check this part if the washer has no power, the control panel is dead, or it won't start
• A blown fuse will test open for continuity
• Repeated failure points to an underlying short or component fault that must be fixed

• Disconnect power before servicing
• Access the fuse at the control board or fuse holder
• Replace only with the same rating: 1A, 250V
• Inspect wiring/components and correct any short before restoring power

A 1-amp protective electrical fuse that replaces a blown circuit fuse in compatible Whirlpool appliances. Restores overcurrent protection to the affected circuit so controls or components can operate safely once the underlying issue is fixed. What it does:

• Protects appliance circuitry by opening the circuit when current exceeds the 1A rating.
• Common symptom: a control, dispenser, ice maker or other function does not get power or operate after a sudden failure.
• Replace only with a fuse of the same amp rating to avoid fire or damage.

• Always disconnect power to the appliance before inspecting or replacing the fuse.
• Check surrounding wiring and components for shorts or faults if the new fuse blows again.
• Handle the part carefully; avoid substituting a different amp rating or type.

This replacement hex nut secures appliance components, helping keep panels, assemblies or fasteners firmly in place so parts stay aligned and vibration is reduced. It's a simple, direct fastener for repair or reassembly. What it does:

• Threads onto a matching bolt or stud to hold parts together
• Helps stop rattling or loosening when a fastener has backed off or gone missing
• Used where a secure, removable connection is required
• Common service fix when assemblies wobble or trim becomes loose

• One replacement hex nut

• Disconnect power and/or gas and move the appliance to a safe, stable work area before servicing
• Match nut thread size and pitch to the existing bolt or stud—do not force mismatched threads
• Tighten snugly but avoid overtightening; use appropriate hand tools
• Ensure proper torque and inspection for corrosion

This 90° elbow (3/4") redirects a 3/4-inch water or fluid line inside the appliance to restore proper flow and stop leaks. It replaces a cracked, split, or clogged elbow to help maintain reliable water routing. What it does:

• Changes the direction of a 3/4" water line by 90° to fit tight spaces
• Restores proper water routing when the original elbow is cracked or leaking
• Helps prevent leaks and water damage from a failed elbow connection
• Compatible with applications that require a compact, right-angle water connection

• One 90° elbow (3/4") as pictured

• Turn off water supply and disconnect power before servicing
• Inspect mating fittings and replace any worn seals or gaskets
• Hand-start threads to avoid cross-threading; tighten to a snug, leak-free fit
• Use appropriate thread sealant or tape per OEM guidance