Wsxh208 Parts

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

• Leaks or puddles around the washing machine
• Reduced water flow into the washer
• Visible cracks or bulges in the hoses
• The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

This is a shipping brace kit that is meant for use with washing machines. The purpose of this kit is to hold the washing machine tub in place while the appliance is being transported. This prevents damage from occurring. Multiple parts are included with this kit.If for whatever reason, the brace kit is missing from an appliance that needs to be shipped, this kit can be purchased and installed to ensure that nothing is damaged during transit. This kit can also be purchased any time that the appliance needs to be moved.This particular shipping brace kit is compatible with washing machine units that are manufactured by the General Electric brand. It is sold as an individual part. The kit is sourced directly from the manufacturer.

A replacement pan head screw used to fasten appliance panels and components. Its standard #8 coarse thread and 3/8-inch length secure trim, brackets, and small assemblies for stable operation. What it does:

• Fastens panels, brackets, and small parts in household appliances
• Replaces stripped, rusted, or missing #8-18 pan head screws
• Restores secure mounting where vibration or wear caused looseness
• Works with sheet-metal or threaded inserts designed for #8-18 screws

• Disconnect power to the appliance before beginning any repair
• Use the correct #2 Phillips or compatible driver to avoid cam-out
• Thread in straight and tighten until snug; avoid over-tightening to prevent stripping
• Keep small screws away from children and dispose of old fasteners safely

This ring drain hose is the replacement drain tube that routes and removes water from the appliance, restoring proper drainage and preventing leaks or standing water in the wash area. Designed to match the original fit and function. What it does:

• Channels wastewater from the tub/pump to the household drain to maintain normal drain cycles
• Restores proper drainage when the original hose is cracked, kinked, or leaking
• Helps prevent leaks and water damage caused by failed or deteriorated hoses
• Compatible with compatible stock mounting points for a like-for-like replacement

• One ring drain hose (1 piece) as pictured

• Disconnect power and water supply before servicing to avoid shock or flooding
• Inspect adjoining clamps and fittings; replace clamps if corroded or damaged for a secure seal
• Ensure hose routing is free of sharp bends or kinks and is secured per the appliance's service instructions

This authentic replacement part is a timer for washing machines. The timer is the part that controls the desired time of the wash cycle. Over time, a timer can become inoperable after excessive use. If the timer is no longer performing its intended function, it will need to be replaced.To replace the timer, start by removing the control panel of the washer by removing the mounting screws. Once the screws have been removed tilt the control panel up to gain access to the timer. Once located, take a pair of needle-nose pliers and grab the centerpiece that rotates. Once the pliers have locked onto the centerpiece, proceed to pull off the timer knob from the front of the control panel. Then pull the timer dial off. Disconnect the two wire harnesses. Once these wires have been removed, slide the timer out from its place. Take the new timer and line it up with the four mounting tabs. Slide it in so the locking tabs lock into place. Reinsert the wires in their correct terminals and secure the control panel.This genuine OEM part is sourced directly from the manufacturer and is compatible with General Electric, Hotpoint, and RCA brand washing machines.

This spring sleeve is a small replacement part that supports and guides a spring assembly, restoring proper spring alignment and tension so the appliance operates quietly and reliably. It's a simple, low-cost wear item. What it does

• Guides and protects the spring to prevent binding or wear.
• Maintains correct spring alignment and tension for consistent operation.
• Can help reduce noise, rattling, or uneven movement when worn or damaged.
• Used where a spring needs a durable sleeve or spacer to run smoothly.

• Disconnect power and water before beginning any repair.
• Inspect adjacent components (spring, clips, mounts) and replace any damaged parts.
• Use basic hand tools; avoid forcing parts to prevent breakage.
• Test the appliance through a short cycle after reassembly to confirm correct function.